Electric blankets can provide some much needed warmth and comfort during the long winter months. Nothing beats a personal heat source on your bed, staving off the nighttime chills. Electric blankets can even help you save money by allowing you to keep your thermostat turned down a few notches. However, these blankets can also be a fire hazard, particularly if they are old or damaged. Read on to learn more about how to stay safe if you choose to use an electric blanket this winter.

Bringing Electrical Work to Your Bed

If you do decide to use an electric blanket, make sure you carefully follow all the instructions regarding use, care and storage so you maintain it in good condition. Most electric blankets are designed to be rolled or hung up when not in use, since folding or bunching them can damage the heating wires. Once a blanket becomes damaged or stops working properly, it's time to dispose of it so you don't risk a fire. Blankets that are more than three years old should be checked carefully, and once they hit a decade of service, it's time to retire them even if they still appear to be in good shape.

You also need to inspect the blanket's cord and verify that it isn't worn, frayed or otherwise damaged. It's generally a bad idea to run the cord under the mattress or under a carpet, which can speed up its deterioration, but you also need to prevent children or pets from chewing on it or playing with it. The best option is often to store the blanket out of harm's way during the day when it's not in use.

Weighing the Benefits and Risks

Even a well-functioning electric blanket can be a hazard if you aren't careful with it. Some authorities even recommend using electric blankets to pre-heat the bed, then stowing them before you actually climb in. When you have an active electric blanket on the bed, you need to also make sure you don't leave any heat sensitive materials above or below it.

Additionally, pregnant women and people suffering from certain illnesses need to be careful that they don't allow an electric blanket to overheat their bodies. Excessive heat can harm developing fetuses, as well as people who have diseases like diabetes. Safer options for supplemental heat sources include a hot water bottle tucked under the blanket, or an electric space heater to warm up an otherwise chilly room.

Expert Treatment for Your Electrical Work

For help evaluating the safety of your wiring or any other electrical work, call an expert electrician today.

Using a warm white or RGB COB (chips-on-board) LED, these flood lights emit up to 1,000 lumens of illumination in a wide 120-degree beam pattern. The weatherproof LED fixtures have a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket is also included to direct illumination where it’s needed.

As a Dallas Electrician with over 27 years of experience, ElectricMan Inc. has seen many of the dangers of DIY Electrical first hand, and has often been called in to make repairs after a DIY home improvement project has gone wrong, or the home owner realized that they were in over their head. The experience to take on any electrical home improvement project is something that is obtained by years of professional training and experience under a Licensed Master Electrician. That kind of experience isn’t something that the average Do-It-Yourselfer has, even if you do consider yourself a Jack-Of-All Trades.

One of the biggest dangers of DIY Electrical work is simply the fact that electricity can be deadly when not handled properly. Many DIY home improvement projects are often done in a hurry, and without proper planning. Something as simple as forgetting to switch off the breaker, using the wrong tools for the job, or even accidentally brushing up against the wrong wire can send high voltage coursing through a human body, easily causing burns, ventricular fibrillation (uncontrolled movement of the heart muscles), and death. We are so accustomed to being able to flip a switch and use electricity in our daily life that we often forgot how powerful it truly is.

One of the major causes for DIY Electrical accidents is unfamiliarity with the electrical circuits in your home. Due to shoddy electrical workmanship in many older homes, it is often difficult to tell which outlets, appliances, and lighting fixtures are on a given circuit, especially if your breaker box was improperly labeled, or if the labeling has faded over time. Most home owners will simply switch off breakers until they see the lights turn off in the area that they will be working, and assume it is safe to start working. This is an incredibly dangerous practice since it is not always the case that all outlets and lighting fixtures in an area will be on the same circuit. A Licensed Dallas Electrician will be familiar with standard wiring practices and will know the proper way to test the circuit that they will be working on to ensure that it is safe.

Another huge benefit to using a licensed electrician for your home electrical work is that they will be well versed in all of the building and safety codes required to make sure the job is done right. The reason that this is important is two-fold. First, it is legally required to adhere to all building and safety codes, and if you ever intend on selling your home or having it inspected for any other reason, a DIY Electrical repair or addition will cause your home to fail inspection if building and safety codes are not followed to the letter, generally costing you more money later down the line to have an improperly performed job repaired. Secondly, and even more important, is the fact that building and safety codes are put in place for a reason. If you are not familiar with these codes or do not follow them, you are putting yourself and your family at risk of electrical shock, electrical fires, and injury or death due to a faulty repair.

A reliable Licensed Dallas Electrician such as ElectricMan Inc. will ensure that any home improvement project involving electricity in your home is completed correctly, in compliance with all of the proper safety and building codes, and will guarantee their work to ensure a successful outcome, and the safety of you and your family. If you would like to learn more about the capabilities and experience of ElectricMan Inc. or discuss a project or repair that you are planning for your home, reach out to us today by phone at 972-792-7270, or visit us at our website at www.electricmaninc.com!

If you are looking for a Garland electrician, be sure to find one who cares enough about safety to help determine if your home is up to par. Some older homes often lack basic precautionary features that are inexpensive, yet vital to the safety of the family. One of these features is the GFCI, and any Garland electrician should be able to determine if your home has one.

Recently in Texas, a family experienced a heartbreaking illustration of what can happen without a GFCI. The mother was bathing her two children, ages five and six, when a hairdryer that was plugged into a nearby outlet fell into the tub. Both children were killed by the electrical current passing into the bathwater.

One of the most horrifying things about this story is that this accident was preventable! Installing a Ground Fault Circuit Interrupter, or GFCI, could have saved these children’s lives, at a cost of less than $60. The circuit in their bathroom was not equipped with this simple piece of equipment, simply because their home was an older home.

When the electrical current is imbalanced, it indicates that the current is passing through something that it is not intended to pass through. A GFCI handles that situation by quickly interrupting the flow of current before it can do harm. Water is an especially dangerous conductor of current, so a GFCI should be installed everywhere that an electrical device might be plugged in near water. This means that GFCIs should be on outlets in not only kitchens and bathrooms, but also in garages, outside, near countertops, and near hot tubs and pools. While a layperson might not realize that, an electrician should. That is why, whether you are looking for a Dallas, Garland, or Rowlett electrician, you should make sure to find one with enough experience to spot potential hazards before they cause tragic results.

One of the best Garland electrical teams you will find is the crew at ElectricMan, Inc. Available twenty-four hours a day, seven days a week, ElectricMan’s team is made up of trained electricians who care about the safety of families. To learn more about finding an electrician Garland homeowners can trust, visit the website. For a deeper connection, join the online community on ElectricMan’s social sites, or call (972)792-7270.

One of the least understood terms in LED Lighting is efficacy, or in simpler terms, how efficient is the light. It is typically measure in lumens/watt. Today, efficacy is becoming more and more important because efficacy varies greatly from product to product. What the consumer needs to be wary of is that you should not be mislead into thinking that just because you are switching from HID or fluorescent to LED that you are getting the best savings available. You also need to look at how efficient the LED product is to maximize the savings.

Here is an example of how this works. Let’s look at a two USA Made competitors LED Retrofit Kit compared to our 4th generation LED kit. All three units are designed to replace 400W HID

From this table, you can see that all products produce over 13,000 lumens, with the MyLEDLightingGuide product producing the most at 14,528 total lumens. It also consumes the least amount of energy of the three units at 105 watts, compared to 130 and 135 watts. For the record, all three products come with a 10 year warranty on the head and a 5 year warranty on the driver. MyLEDLightingGuide also offers a 10 year warranty on the driver as an optional upgrade.

But what does this all mean in terms of saving you $’s. Let’s take a typical scenario. Let’s say these retrofits are installed in MyLEDLightingGuide 105W retrofit kit. Multiply this number over 10 years and by the number of fixtures you have to replace, and this is real dollars. And let’s not forget the MyLEDLightingGuide retrofit kit is also much brighter than the competitors products.

So efficacy is important. It saves you money. But a well designed kit will also produce more light. Just think, without efficacy we wouldn’t have as great of savings, nor would we have more light production from the same amount of power.

Efficacy is huge in the world of lighting, and it is only going to get better year by year. Technology improves, lights improve, and thus; efficacy improves. In 10 years, lights that will be made are probably going to be 5x improved then they are today. And since they are already super efficient today, just imagine that times 5. Now that is efficacy!