Electricity is a modern marvel that most people don't really put much thought into -- unless it isn't working properly. You flip a switch, twist a knob or insert a plug into an outlet, and -- presto! -- the room is lit up, your television springs to life or your phone is charging. As wonderful as electricity is, it can also be dangerous. The following safety tips are ones that you should always keep in mind to stay safe from the inherent dangers of electricity. 

1. Spring for an inspection

While this tip is especially important for older homes, even newer homes could have faulty equipment inadvertently installed in them that could increase the potential for danger. That being said, if your home is older, chances are that it wasn't built to handle the increased reliance on electricity that is a given these days. An electrical inspection will pinpoint those potentially hazardous areas and advise you on how to address them. 

2. Buy a fire extinguisher

If your home catches fires due to an electrical issue, the only safe way to put it out is to use a fire extinguisher that is designed to retard chemical fires. If you attempt to put the fire out with water -- which might be your first instinct -- you will only make things worse. This is because water conducts electricity. Make sure that you keep fire extinguishers on every level of your home. Store them in a place that is easy to reach. Make sure to inspect them regularly and replace them as needed. Stay up to date on how to use it correctly. 

3. Get to know your outlets

When facility managers or building owners first start the search for new replacement lighting fixtures in their facility, it can seem like a long road ahead.

From all of the read this post where we talk all about what it is. From there, you can come back to this post and continue, it will really help you keep up! Now, let’s get into when high bay lighting is practical in both broad terms and specific applications it is best used in.

In broader terms, the most appropriate time to use a high bay lighting fixture is for ceiling heights that are between 20 to 40 feet high. For heights between 15 to 20, you typically are going to go with a low bay fixture, but that’s for an entirely different post. For anything lower, you will typically be dealing with tubes and panels lights, most often found in offices, hallways, and other similar type environments.

So for commercial and industrial type environments in which the ceiling height is 20 to 40 feet tall, a high bay lighting fixture is commonly the most chosen lighting fixture to install. That is the broad definition of when high bay fixtures are going to be used at the most optimal rates.

So, what types of high bays are often used and fit the purpose perfectly. Although these applications are highly relevant, there are some we have not listed and may have missed, but these are just a few of many very practical applications that high bays work perfectly in:

Gymnasiums

Think about your school gym, or even your warehouses often have tall ceilings due to storage space requirements, this need for space vertically makes their ceilings the perfect height for high bay fixtures.

Factories

Similarly to a warehouse, factories and production facilities need proper lighting to keep things safe and consistent. With proper lighting through installation of high quality high bays (such as with LED technology), you opt-in for better safety standards and higher consistency in your production efforts.

Airplane Hangars

Large airplanes call for large ceilings in the hangars and a proper lighting system is a must for this environment. When maintenance is required, you need clear and proper light to contact one of our professionals.

If you’re searching for a way to control your lighting from anywhere and without flipping a switch, Wi-Fi LED lights are the perfect products. With a Wi-Fi LED Controller Hub, you can control compatible LED bulbs, LED flood lights, and LED strip lights with your Android or iOS-enabled smartphone or tablet. The Milight 3.0 app, along with a Wi-Fi compatible controller when necessary—allows you to power lights on and off, control multiple zones of lights, select from thousands of colors, choose from various single-color and color changing modes, and control brightness and speed.

Wi-Fi compatible flood lights are great for landscape lighting, tree uplighting, architectural wall washing, and other outdoor applications. These LED landscape lights are available in 30- and 50-watt versions and have separate LEDs for either white or colorful illumination. They plug into a standard 3-prong outlet and can be easily connected to a Wi-Fi hub. Connect multiple lights to the hub, and synchronize their color, brightness, or mode with your smartphone or tablet.