The frequency of accidents caused by the incorrect usage of electricity has increased as our dependency on electronic devices has increased over the last several years. Every year, accidental electrical fires cause millions of dollars in property damages. Because of this, you should always practice as much electrical safety as possible whenever you use your electrical appliances and devices. To make sure that your home is as safe as it can be from electrical accidents, you should also consider talking to an electrician in Glendale about performing an electrical safety assessment, updating service panels and ensuring that your home is properly grounded.

Can you use any size fuse or circuit breaker in your electrical panel?

Many older homes still utilize an outdated fuse box inside the service panel, instead of a safer and more modern breaker panel. If you still have a fuse box, then it is very likely that your electrical system is not prepared to take the amount of electricity that you use every day. This results in fuses blowing very frequently for many homeowners. Rather than replacing blown fuses with the appropriately sized replacements, some homeowners choose to oversize the fuse in order to reduce the frequency of blown fuses. This can be very dangerous, though not nearly as dangerous as replacing the fuse with something that cannot blow, such as a coin. Doing either of these should be avoided. Fuses are protective devices that are designed to stop electricity from flowing into a circuit whenever it reaches a level that is dangerous. Whenever you oversize or bypass a fuse, your circuit can overload. This can lead to overheating, fire and electrical shock.

One of the best ways to deal with an older fuse box is to have your electrical service upgraded by one of the technicians at The Electric Connection. We can send someone out to upgrade your service, and install the appropriately sized circuit breakers in your new electrical service panel. If you are experiencing any issues with your electrical panel, please don’t hesitate to give us a call today.

Click here to visit our website.

At this time of the year, the weather in most parts of Australia is perfect to spend time in the outdoor spaces of your home. You can spend leisurely hours lounging around by the pool, or have BBQ parties in your outdoor kitchen, on the patio or deck. In short, you can make good use of these areas in the daytime as well as after dark.

This also means you will end up using some or the other electrical equipment and appliances there and this brings with it a specific set of challenges. In some cases, the falling dry leaves can also prove to be an electrical hazard in the outdoor areas of your home. The best way to avoid problems is to follow these basic outdoor electrical safety tips:

Just as you get the indoor electrical equipment and installations audited regularly, you should also hire an electrician to conduct a semi-annual audit of your garden and yard’s outdoor electrical fixtures. It’s best to get these checks done some time between Winter & Spring.

The next audit should be conducted between Summer & Fall. This helps reduce the chances of electrical problems surfacing out of the blue due and to temperature and weather fluctuations. While it’s best to call in a licensed and experienced electrician to handle the job, it’s also a good idea to keep an eye out for signs of electrical problems including:

When the electrical audit is being conducted, ensure that all your outdoor electrical equipment is stored & functioning properly.

Damaged or loose electrical wiring can prove to be a major electrical hazard and can be the cause of an electrical fire in your home; this is especially true if the wiring comes in contact with dry leaves or firewood that’s been piled up in the yard. Once the electrician gives you a complete report of the condition of the wiring, you should also make it a point to replace any wiring that’s loose or damaged.

Any water pooling in the landscaped areas of your home can prove to be an electrical hazard and can put your home and other outdoor features on your property at risk. The best way to prevent this from happening is to ensure that all the electrical switches, cords and connections are stored away and that they are in weather-proof casing; this ensures they don’t come in contact with any water sources.

Every pool and spa tub installation has some electrical wiring and fixtures such as pumps, underwater lights and power points etc. Ensure your electrician checks all these fixtures and that the electrical safety requirements have been met.

It’s a good idea to opt for a preventive electrical maintenance contract. As part of this contract, your electrician will check all the electrical installations in your yard and garden spaces. These checks help ensure that all these systems are in a good condition and that if any potential problems are noticed, they can be nipped in the bud.

The weather is starting to get cooler, and as summer rolls into fall, we thought we’d remind everyone of ways they can keep their homes safe from fires!

Check your smoke detectors—you should test your smoke detectors twice a year—once in the spring, once in the fall. In addition, remember that smoke detectors are designed to last 10 years. If yours is older than that, it’s highly recommended that you install a new one. New smoke detector laws that went into effect earlier this year require all new smoke detectors to have 10-year batteries, so you don’t have to worry about replacing the batteries along the way.

Check carbon monoxide (CO) detectors—having a smoke detector isn’t enough anymore; if you want to keep your family totally safe, you need to also install a carbon monoxide detector. Carbon monoxide is an odorless, colorless, and highly toxic gas that can be deadly even in small amounts and can be released by any faulty gas appliance, including furnaces and fireplaces. Your best bet? Install a combination smoke alarm/carbon monoxide alarm for maximum protection.

Inspect your extension cords—with the holidays coming up, you’re going to want to make sure your extension cords are in good shape and not damaged or frayed. Any extension cords you’re planning on using outdoors should be weather-rated. Inside, make sure you use surge protectors and power strips with internal overload protection, and make sure you minimize the amount of adapters plugged into a single outlet.

Be careful with space heaters—space heaters are convenient, but can be a major fire hazard if you’re not careful with them. Make sure there is nothing flammable within three feet of the space heater, and never plug it into an extension cord.

Protect your outdoor electrical systems—any outdoor electrical outlets should be GFCI outlets and covered by a “bubble cover” to keep the elements out. If your electrical service cable is exposed, make sure it’s not damaged. During the holidays, don’t hang any decorations on or near the cable.

Install arc fault circuit interrupters—these are not required by building codes, but they offer a higher level of protection for your electrical system and are generally highly recommended. Arc fault circuit interrupters (AFCI) are designed to detect an unintended electrical arc and disconnect the power before an electrical fire can start.  They are the safest way to protect a home from the risk of electrical fire.

If you’re at all concerned with your home’s electrical safety this year, don’t take chances—call Kolb Electric! We can upgrade your home’s electrical service in any way you need, from installing smoke detectors and adding outlets to a full-on heavy up. Don’t gamble on fire safety—call Kolb Electric today!

When you walk into your home at night after a long day away, what’s the first thing you always do? Switch on the lights! The lights in your home greet you every evening and they brighten up your dark, early mornings as you groggily flip the switch. So if your current lighting design does not please the eye, or if you’re installing lighting in a new home, you want an attractive and practical design to illuminate the house.

The best way to ensure your new lighting design does the job is to hire licensed electricians to properly and safely install your new system and help you decide on the ideal placement and style. Whether you want a new lighting scheme for practical purposes, or a lighting system that will be both aesthetically pleasing and functional, you need a skilled electrician to help you out with custom lighting design services. Here are a couple of reasons you should always work with licensed contractors for your new lighting.

You can look at pictures of sconces and chandeliers online or in catalogs, but nothing can bring the image to life quite like seeing these lights in person. Some lighting professionals, like the friendly people at FB Electrical Services, offer a Call FB Electrical Services or stop by to visit our showroom in Newton, MA to discuss your need for professional custom lighting design services in Brookline.