Under normal circumstances, a circuit breaker lasts for years without ever needing repair or replacement. However, from time to time a circuit breaker will actually “break.” Diagnosing a circuit breaker problem is not a project that an amateur should attempt on his or her own. Only the most skilled do-it-yourselfers can handle this project. Unless you are skilled in electrical safety practices and the proper use of electrical test equipment, contacting an electrician in Los Angeles just makes sense.

If you have a breaker that is tripping regularly, more than likely the breaker is doing its job—the circuit is just overloaded. A skilled electrician Los Angeles can test this by using an ammeter—a tool that is used for testing the amount of electricity going through the circuit. Another problem that occurs regularly is that the breaker will not reset after tripping. In this case, the problem is more likely in the line of electricity rather than the breaker. In most cases the line has a fault and the breaker will (purposely) not reset until the fault is cleared.

When an electrician comes to test your breaker, he will likely first test the voltage at the breaker terminal. Generally, the reading should show 120 VAC. If this appears correctly, he will load the circuit and test again. If voltage drops at this point, there is a good chance the breaker is bad.

Since this is a job that is so in-depth and difficult, calling an electrician from The Electric Connection is highly recommended. These experts have years of experience and training, so they are able to review your problem and determine the best way to proceed. There is no use in taking risks when it comes to your safety and the safety of your home; an experienced electrician is just a phone call away.

If you live in an older home, you probably have wiring that was designed to support far less voltage than the demands of today’s modern equipment, like computers and home entertainment centers. The wiring might also be starting to decay, leading not only to potential power losses, but fire hazards as well. In many cases, you should invest in at least partial—if not whole-house—rewiring to upgrade your home so it can handle the electrical load and prevent hazards.

Here are a few signs to look for that may warn you it’s time for wiring replacement.

Fixtures with less blue light emission have less of an effect on circadian rhythm and contribute less to glare, light trespass, and light pollution in the night sky. These warm white LED street lights emit from 17,000 to 23,700 lumens depending on the fixture, and they consume less than half the energy that an HID fixture would use. The durable LED lights have weatherproof die cast aluminum housings that are powder coated for rust resistance. Each fixture also comes with a removable cover for easy access to the driver. These street lights come with either an adjustable bracket or a mounting arm that’s designed to slip-fit onto round poles. All of the fixtures can be mounted onto the side of square and round poles with our Round-Mount and Square-Mount Fixed Arm Kits (sold separately). An attachment is also available for wall mounting.

here.