Indoor Generator Provides 20,000 Watts of Stored Renewable Energy to a Ranch Home, Even When All External Power Supply is Unavailable

Dallas, TX  December 30, 2011– Doug Kerr is the proud owner of a stretch of land located in the rural area of Kaufman County (Texas) where the air is fresh and the hustle and bustle of city life is non-existent. One thing Doug’s land doesn’t have, however, is a city power grid. Traditionally, to gain access to power in an area that hasn’t already been included on the electrical grid, you can pay the local electrical provider a large sum to run new electrical service to your location, or be forced to use noisy, polluting, and high-maintenance fuel-powered generators.

Fortunately, Doug found a much better option when he called ElectricMan Inc., a local Dallas and Plano electrician. ElectricMan Inc. is the exclusive North Texas provider of the Indoor Generator, a system that utilizes the latest technology in power storage, partnered with reliable renewable energy options to pioneer electrical independence not only for off-grid applications, but any residence or business that could benefit from more reliable electrical service and lower electrical costs.

Using a vertical access wind turbine, ElectricMan Inc. takes advantage of the abundant wind rolling across Doug’s land, from any direction, to provide a consistent source of electricity for the custom-built Indoor Generator unit installed in his home. The Indoor Generator system itself contains 20 maintenance-free deep-cell AGM batteries capable of storing 20,000 watts of on-demand power—enough electricity to run the household for an entire week or two, even if the wind doesn’t blow at all.

Keeping in mind that no matter how reliable your system is, a backup power plan is always important. The Indoor Generator is also compatible with an external gas powered generator that will run and charge the system at the same time in the event of an emergency, or the unlikely case that the wind doesn’t blow for an extended period of time. This is where the innovative versatility of the system makes it uniquely capable to reliably power a home. With thousands of programmable commands, the Indoor Generator has the capability to utilize multiple incoming power sources, and automatically switch between options such as grid power if it is available, stored battery power, wind turbines, solar panels, or a gas-powered generator, dependent upon what option is readily available and efficient.

The innovations that are integrated into the Indoor Generator system now give any home or business access to a constant supply of clean power, increasing safety, security, and longevity of electrical systems and appliances, while providing the opportunity for electrical independence to anyone.

About ElectricMan Inc.

ElectricMan Inc. is a licensed Dallas and Plano electrician serving the Dallas/Fort Worth area with 27 years of experience in electrical repair and installation, offering fast 24-hour service for residential and commercial needs. ElectricMan Inc. is now offering state-of-the-art backup power systems that exceed current emergency power standards while also providing a homeowner or business owner with the ability to have multiple options for emergency power, as well as the option to switch to the most efficient power supply available during normal usage to reduce energy costs in the long run. Call ElectricMan Inc. today at 972-792-7270 for a free quote on your next electrical project!

5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Do you know why your home in Manassas would benefit from whole home surge protection?

You might think it has something to do with lightening. However, the reasons for whole home surge protection are more complicated than you may realize.

In addition to not experiencing a significant number of them in Manassas, did you know that whole home surge protectors can’t stop lightening strikes from damaging your electronics?

At this point, your probably starting to seriously doubt the importance, use or need for whole home surge protection. However, nothing besides a lightening rod and hope can keep your home safe from a lightening strike.

Another point to keep in mind is that whole home surge protection’s primarily function isn’t to protect your electronics and appliances from outside surges. It’s actually intended to protect your electronics and appliances from each other.

When we think of power surges we typically envision lightning strikes and electricity bursts from outside power lines. In reality the majority of surges are short intense shocks created by large appliances such as generators and HVAC motors. These smaller surges typically go undetected and usually don’t blow out the entire circuit.

However, over time, they add up. If you banged your knee in the same spot every day for a year, you might not have any significant damage on the first day, but on day 365 you’d probably have quite the bruise. The same logic applies to your electronics. Those little zaps might not degrade their performance immediately, but the problems are cumulative. Why shorten their expected usefulness and replace your appliances sooner than you have to?

Taking on a Thanksgiving get-together is no easy task, and if you’re going to do it, you might as well make it something guests will remember. Fortunately, making it memorable doesn’t have to be complicated. We have some simple LED lighting ideas that will help you dress up your home for the holidays.