If you own or manage apartments or offices, how can you tell whether your Beverly Hills electrician is treating you right? I’ve been providing electrical services to property managers and owners for over 30 years in the Beverly Hills and surrounding areas and have learned a lot about what they really need and want and how to treat them right. There are eight benefits that your electrician should provide you if are a property manager.

1) The electrical contractor should be easy to reach. A live person should always answer the phone during business hours. After hours, there should be an emergency number that you can call.

2) If you have an urgent electrical situation, your electrical company should handle it right away. Let’s say that one of your office buildings loses its exterior lights at 8 p.m. on Sunday night. You want an electrician who can fix it, whether it’s as simple as flipping on a circuit breaker or whether troubleshooting is needed to find where bare wires are touching. The electrical company should be large enough that it can send you experienced and knowledgeable electricians right away to get the lights back on.

3) Your electrician should quote you prices in advance of doing work. If you want something new installed, the electrician should be able to give you a price up front in writing once he’s seen the job. New installations include, for example, a new light fixture, a rewire of an apartment, an electrical panel upgrade, or installing any other new electrical equipment.

If there’s something broken, for example, an electrical outlet that no longer works, he’ll want to charge you per hour for troubleshooting. However, within about an hour, he should either have fixed it or have figured out the problem and be ready to give you a written estimate for fixing it.

4) You should be able to trust that the electrician has the judgment to give you accurate estimates. For example, the doorbell for one of your apartment units has broken. Even though door bells look small and simple, in this case, looks can be deceptive. Hunting for an electrical short or loose wire somewhere in the walls could turn into a larger project. Your electrician should have the judgment to realize this and give you an accurate estimate early on so that you can decide if you want to go ahead.

5) The electrician should act professionally with your tenants. Electricians should have a friendly, professional manner with tenants. They should also have the training to give information to tenants on a need-to-know basis, knowing what to say and what not to. For example, an electrician should start by saying something like, “The management company asked us to come out to get your power back on for you.” The electrician should know not to say, “The wiring in your apartment is scary. I’m going to recommend a rewire to the management before it burns down!”

6) The electrician should make sure that you know when the job is done. When the electrician finishes, he should check that everything works, clean up after himself, and if the tenants are home, let them know that the job is done. He should also tell you.

7) The electrician in Beverly Hills should keep you posted on the condition of the electrical in your units. Let’s say that you asked the electrician to add a circuit for a computer. He adds the circuit, but also notices that a bedroom has no smoke detector. Or the tenants might tell him that at night, when a hair dryer is turned on in the lit bathroom, the circuit breaker trips off. Without saying anything to the tenant that would obligate you to do electrical work, the electrician should give you a heads up.

8 ) The electrical office should provide you with accurate bills. Bills should arrive when expected with the detail needed to provide you with a clear accounting for the property owners. Paperwork should be smooth and simple, just as the electrical work should be smooth and complete. During business hours, an office manager should be available to answer any questions about billing.

If your electrician gets the job done, charges honest and reasonable rates, and offers you these eight benefits, you’ve found a keeper. Keep his contact information at hand and you’ll know who to call the next time you have an electrical problem.

Visit our company profile.

Lighting is a critical aspect in a number of industries such as manufacturing, mining, marine, packaging, and even sports. Electrical fixtures for such industries are designed for heavy duty performance and can last even in the most adverse conditions such as extreme temperatures and climate.

Apart from ensuring proper lightening and enhancing the output, electrical lighting also helps in maintaining safety in your workplace. If you have a well-lit work space, then your workers can avoid unwarranted accidents like stepping on sharp tools, bumping into equipment, etc. You can use a wide range of electrical light fixtures such as LED, magnification lights, fluorescent lamps, halogen machine lighting, etc.

You must choose the right light fixtures based on the environment you work in and the lighting demands of the space where you need to install them. Let us look at some industrial lighting fixtures that are available.

5 Types of Industrial Lighting Fixtures

In industries like mining, transportation, steel, marine, etc., there are high risks of explosions which you cannot overlook at any cost. You have to make sure that the lighting fixtures have the ability to withstand the heat and pressures that are generated by an explosion. Explosion proof fixtures meet some of the most stringent quality standards of the National Electric Code.

Indoor fixtures can be installed in a number of indoor work areas like workshops, workstations, bays, etc. As different work environments have different requirements for lighting systems, it would be ideal to contact a supplier who can offer you customized lighting requirements. Ensure that the lighting systems are capable of withstanding harsh working conditions as well as extreme temperatures.

Roadway fixtures are ideal for places where you need high mast lighting. Safety is extremely important on the roads and is of major concern for the protection of all those present on the road, which is why you need a brightly lit road. You can control the amount of light generated by these roadway fixtures to make them brighter or dimmer, based on the time of the day they are being switched on.

Every sports ground requires proper lighting. It isn’t a pleasant experience for the spectators when they can’t clearly see what’s going on in the ground/field and it would equally hinder the players from performing well if the lighting is compromised. Regardless of which sport it is, be it tennis, football, cricket, basketball or rugby, flood lights are an indispensable part.

Places like nuclear plants, mining fields, oil rigs and underwater operations require high quality and failure-free lighting solutions. It is important that there are various kinds of light sources as well as lights so that the work doesn’t halt due to lighting failure of any kind. Ideally, you must not use regular industrial lighting fixtures in such places. Make sure the lighting you use are reliable, have a long life and have low maintenance costs.

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.

Do you own electrical equipment that is overheating? If you’ve noticed any of your electrical devices, like a toaster or a radio, overheating you may have a serious electrical problem on your hands. Fortunately, at Kolb Electric, we have just the tools to diagnose and fix the problem.

Overheating of electrical devices can be caused by a number of problems. From faulty wiring to an outdated electrical system, it’s important to get to the bottom of an overheating electrical device.

At Kolb Electric, we offer thermographic inspections for your home or business. A thermographic electrical inspection will test the equipment’s temperature against the temperature of surrounding components. Significant variations in temperature indicate electrical problems in your appliances and equipment. Temperature abnormalities are often due to defective or failing components. By catching problems early on, they can be corrected before they can cause even greater damage later.

If you manage a home-based business that relies on several pieces of electrical equipment, it is especially important that you routinely schedule thermographic electrical inspections in MD, VA, or DC in order to prevent your important equipment from malfunctioning.

A thermographic inspection is completely non-contact and safe to perform on energized electrical systems. Thermographic electrical inspections can be conducted while your equipment is still in operation, which means you won’t lose time by having to shut down your equipment.

When combined with traditional home inspection techniques, the infrared thermography inspection method reveals considerably more about your house than can be seen with conventional inspection tools. Some things our infrared thermography inspections have detected include:

Water leaks: using an infrared camera to scan the inside of your home can reveal moisture leakage around plumbing systems, the roof, any windows, etc. We’ll be able to see them because areas with more moisture will appear darker than surrounding warmer, dry areas.

Insulation deficiencies: our scanners will reveal large temperature differences within your home where insulation is deficient or absent.

Roof leaks: we’ll be able to spot water and moisture intrusion and accumulation below the surface of your roof, which can help you pinpoint leaks and lessen their effects before they do major damage to your home.

Electrical system problems: one of the best things about an infrared thermography scan is that it helps you see any deficiencies in your electrical system, including loose connections that could cause certain appliances to run inefficiently (or to not run at all).

Structural issues: finally, infrared thermography scans will help locate structural issues within your home, including poor heat transfer, bad conductivity, and more. We may even be able to detect missing or damaged structural components.

For all your infrared thermography needs in Maryland, Virginia, and Washington, DC, contact the electricians at Kolb Electric today—877-287-1179877-287-1179 or click here!