Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

Looking for new ways to reduce your electricity bills? The Department of Energy is on the job. The agency is sponsoring research that could help decentralize the nation's electrical grid – instead of powering your electrical work from large generating stations, you could create your own electricity on-site by burning natural gas. As a bonus, the equipment could provide homeowners with heat energy as well. Read on to learn more about the Energy Department's program to spur the development of small generator technologies.

Advanced Electrical Work for Your Home

The projects are part of the Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E), which is spending $55 million to support research and development into various technologies that could strengthen the flexibility, dynamism and independence of the nation's energy production system. The generator-related programs, known as GENSETS, or GENerators for Small Electrical and Thermal Systems, are receiving $25 million of the funding.

In addition to the GENSETS projects, the Energy Department is also sponsoring a program called Transportation Energy Resources from Renewable Agriculture (TERRA), aimed at developing biofuels.

“The GENSETS and TERRA programs demonstrate ARPA-E’s unique approach to developing innovative ideas to advance energy technologies,” ARPA-E Director Dr. Ellen D. Williams said in a statement. “ARPA-E is pushing the boundaries of current energy technologies to create a more secure, sustainable and affordable American energy future.”

Waste Not, Want Not for Excess Heat

The GENSETS technologies being developed are similar to microtrigeneration systems, which use natural gas to create electricity and capture excess heat for hot water and general home heating. With one of these systems, you'd still have a gas bill to pay – but if you combined your equipment with rooftop solar panels, you could reduce the cost of powering your home electrical work to a minimum.

The generator technology already exists and has been deployed to a certain extent, but the Energy Department program hopes to further refine the devices and make them more efficient, reliable and affordable. Twelve different teams are working on generator projects to take the equipment as far as it can go to meet the needs of the homeowners of today and tomorrow, focusing variously on internal combustion engines, Stirling engines, micro-turbines and solid state devices. One technology could end up being a clear leader and push the others out of the field, or multiple engine types could be competitive and give consumers a choice in their home electrical generation system.

A Glimpse into the Future of Electricity

If you have any questions about how the Department of Energy ARPA-E program could affect your electrical work, contact a qualified electrician today.

The year of 2017 brings along more advancements in the commercial lighting space. And in a world in which things are changing so rapidly with lighting technology in virtually every way, it can be difficult to get everything you need to know in one place. For this reason, we’ve created this post in hopes of helping you get a rough guideline of the actual stadium lighting costs for the current year, 2017. Along with that, giving you the outlets to research more on the topic and get you one step closer to getting the most efficient and ROI focused technology illuminating your fields.

This post will be broken into two parts; the typical costs associated with the physical light itself and everything related to buying stadium lights. Secondly, the typical costs to powering your lights and how certain technologies may save you more money than others and how you can go about getting the highest return on investment when choosing a lighting technology and brand to go with.

To start off, we are going to cover the technical terminology of stadium lighting.

Firstly, stadium lighting is the simple term for high mast lighting. other technical terms, there are far too many to cover here. But, we think you should know the definition of lumens as we will be using it quite often. To explain, a Click here to view more about the pros and cons of both and which one is better for you.

All in all, it is too variable to give a definitive price to all situations. Keep in mind though, that a comparable LED fixture could cost double but, cut energy consumption by nearly 75% in some cases.

Since we seriously believe LED is the best option for stadiums and sports fields to illuminate their place, we are going to use that as our example (and recommendation).

Let’s keep it simple so you can use our example to get a rough idea what it will cost to run your lights.

Let’s say you have 10 lights. Currently, your high masts are metal halide and use 1,500 watts per fixture. Now, let’s say you are looking for a more efficient technology and you come across LED. You find a comparable light which will output the same amount of light (or lumens), and only consumes 400 watts per fixture.

In total, the metal halide lights are consuming 15,000 watts in total (when in use) and the LEDs would (if chosen) be using only 5,000 watts. That is 3 times less energy, which can lead to some great savings. This reduction from 1,500 watts to 500 watts per fixture is the exact reason fields both small and large fields are converting to LED over other technologies like metal halide and HPS.

For example, we often find that fields that convert to LED with us from metal halide or HPS high mast pole lights realize a payback of their investment in as little as 1 year. Additionally, since LEDs last much longer they get to realize these cost savings for much longer and thus; a much higher ROI over the lifespan of the light.

Additionally, since LEDs last longer they enjoy an additional benefit of less maintenance requirements. This allows more cost savings as an indirect benefit of LED high mast lighting.

Tips for Reducing Costs

We hope this post has answered your questions regarding most sports field lighting costs, if not, either use our contact information above or leave a comment below and a commercial lighting professional will personally reply to your questions and input.

Homeowners in Allen and other parts of North Texas know what time of year this is—and they keep the phone number for their top Allen electrician handy. Why? Springtime in North Texas is well-known for its potentially severe weather. Severe storms, along with extreme temperatures and lightning are just a few of the conditions responsible for rolling blackouts, power surges and power outages. Our weakened power grid and a growing population does nothing to alleviate the situation, which is why many turn to their top Allen electrician for tips on how to deal with the storm season.

Storm Season Tips

With the weather in North Texas being so unpredictable, how can you be sure that you are prepared to tackle what Mother Nature dishes out? Follow these simple tips to protect your home, your electrical system and your family from dangerous and frightening conditions.

#1 Have your electrical system checked regularly. With this storm season upon us, it is extremely important that you get in touch with your Allen electrician and have him look over your circuit breakers, wiring and outlets as part of his regular maintenance. Flaws in your electrical system, be it with breakers, wiring or any other aspect, combined with unpredictable weather, is the recipe for a very, very bad situation.

#2 Use power surge protectors on all your appliances. Did you know that, even a lightning strike that hits miles from your home can affect your appliances? Power surge protectors show up often in storm season tips everywhere, and there’s a reason why. Power surges can be deadly for your appliances and anything else hooked up directly into the outlet, particularly during lightning storms.

#3 Install a built-in surge protector on your circuit panel. This will protect everything hooked to the circuit panel from potentially damaging surges. Even when the power is restored after an outage, it often still does not come on right away; instead, it flickers, which shoots and cuts off electricity randomly to your appliances, ultimately causing damage.

#4 Always keep a weather radio handy. Weather alert radios are an invaluable addition to your home’s severe weather kit. In case of an emergency, an outage, lightning strike or blackout, you will have access to weather updates, evacuation information (if necessary), and instructions on how to keep your family and home safe in the event of bad weather.

#5 Invest in an indoor generator. Indoor generators are a great way to take a little pressure off of the overloaded power grid during a power surge or blackout. When there’s a blackout, the indoor generator kicks in, keeping a steady flow of electricity going to your home and keeping your appliances from getting damaged. Some generators are solar-powered, which can save you energy, time and money.

ElectricMan: Helping You Prepare

Severe stormy weather doesn’t have to be scary, inconvenient, dangerous or costly. Following these simple storm season tips can ensure that you and your family are spared the expenses and headaches that come with unpredictable weather in North Texas. For 27 years, ElectricMan has dealt with all sorts of electrical issues resulting from severe weather. Call us today at 972-301-2630 to learn more about how we can help you prepare for a stormy season. For more helpful tips on keeping your home’s electrical system running well, keep checking in with us at blog.electricmaninc.com or check out our website at www.electricmaninc.com today!