The costs of lighting changes from year to year. As technology gets better and demand increases, prices drop, effcicieny increases, and everyone is in a win-win situation. With this ever changing landscape comes misinformation, which is why we have put together this post.

This post is going to lay out the true tennis court lighting costs for 2017. On top of that, we are going to go over some tips and things to be on the look out for in regards to choosing the best light fixture for your tennis court that will save you money and produce the best illumination possible.

This post will be broken into two parts; the average costs that are associated with the actual light fixtures themselves and the costs associated with them. Then, the average costs of powering your lights and how to achieve a higher return on investment by being a smart buyer.

Let’s start off with defining what exactly tennis court lighting is, and why it matters.

For starters, tennis court lighting is the application term for high mast lighting. High masts are the other technical terms, there are many that go far beyond the scope of this post. But, we think you should know the definition of lumens as we use it quite often. Technically, a lumen is the SI unit of luminous flux. Although that doesn’t say much, just know that lumens, in simple terms, is the amount of light being emitted by a given fixture. The more lumens, the more light you will have being output.

Now that we have a basic understanding of what tennis court lights actually are, we can get into the real costs of tennis court lights. Hopefully, these costs allow you to be aware of all the options and give you a better understanding on how to go about selecting the proper lighting technology for your court.

The costs associated with your tennis court / retrofit kits are typically much cheaper)

4. Quantity of fixtures needed

5. Your tennis court lux requirements or desires

As with any industry, what brand you buy from and what technology you buy is going to be the biggest cost variable. The most important thing to keep in mind is not only the initial costs of a fixture, but also the costs of running such fixtures over the span of it’s lifetime.

If, for example, you have one light that consumes 1000 watts of light and another that consumes 400 watts but the first one was only $500 and the second one was $1,000, which would you buy all else equal? Well, assuming they both output the same amount of light it actually makese sense to go with the second light, even though it costs twice as much.

Why you ask?

Because the cost to operate the 1000 watt light is more than double that of the 400 watt light, which over the lights lifespan can actually end up costing you much more to run the 1000w light.

These numbers aren’t entirely fictionary either, in fact; they are very close to real life examples we have seen when other tennis courts convert to LED technology from metal halide or HPS. What we haven’t described in the above example though is other cost saving benefits that LED has besides just being more efficient; but we will get to that later.

As for actual costs, they can vary far too greatly for us to list here. It all depends on what lighting technology you choose (think LED, metal halide, etc), which company you buy from, the quantity you need, if you are retrofitting or fully replacing your fixture, and what your lumen output requirements are.

A quick note on retrofitting or replacing in simple terms; retrofitting is typically cheaper for a couple of reasons. Retrofitting in short, is the process of replacing only the luminaire source from your fixture, instead of the entire fixture itself. LED vs metal halide cost to run in our example, the cost analysis can be run between any technologies in the same way. As you will see though after comparing metal halide’s  cost to run vs LED, that LED is far more efficient and costs significantly less to run.

Let’s get into the example:

Let us assume you have 10 lights. Currently, your high masts are metal halide and use 1,000 watts per fixture. Now, let’s assume you are looking for a more efficient technology and you come across LED high mast lights. You find a comparable light which will output the same amount of light (or lumens), but only consumes 400 watts per fixture.

In total, the metal halide lights are consuming 10,000 watts (assuming you have 10 lights) and the LEDs would be using only 4,000 watts if installed. That is 2.5 times less energy being consumed, which can visibility lead to huge savings.

This reduction from 1,000 watts to 400 watts per fixture in the metal halide to LED conversion in exactly why sports field, including tennis courts, are converting to LED.

Extra Tips for Reducing Costs

Conclusion

Hopefully the explainations of where the cost of tennis court lights are in 2017 have been thorough. While it’s impossible to give exact prices for every scenario, we hope this has been a starting point to your tennis courts lighting system.

There’s a lot of scary information floating around when a discussion regarding electricity is at hand. Some of it is very valid, and some might be considered a bit of an exaggeration. But one area we really like to nail home is the dangers of a power surge. These are frighteningly common, and present very real danger to both you, and to your electronics. Protect yourselves (and your investments!) by learning how to prevent surges, and how to mitigate the possible threat they pose. 

Generally speaking, power is always “surging” to a minor degree. Every time a machine kicks on, or you flip a switch, the course and amount of power in your home fluctuates slightly. But more specifically, what we call a power surge is a dramatic and large spike in the current of your home.

This spike is exceedingly brief (somewhere in the neighborhood of a thousandth of a second), but can carry some real risk. More often it carries a risk to your possessions than your person, but you put a lot of money into your investments. Protect them!

Protecting your home from surges is actually pretty simple. It just takes a little preparation, a minor investment and a little bit of your (or our!) time:

You probably noted how adamant we were about that last one. So what’s the big deal? We could note a bunch of anecdotes about how a friend of a friend regretted not getting one, but let’s stick to the facts. Like we said, surges happen all of the time. Most of these are caused just by the general goings-on of a household. Whole home surge protection is hands down the number one most effective method of keeping you and your home safe.

Without getting too technical, a whole home electrical surge protection system policies and assists in maintaining proper, safe currents in your home. Do you have to have one in your home? Not really, they aren’t code yet. Should you get one? Absolutely. Surges can cost you huge money, and whole home protection is a very cost-efficient safety measure.

Want to learn more about how the expert electricians at Kolb can help you and your home stay safe? Contact our team today!

Your bathroom is a room that tends to be ignored when you think of sprucing up the house. It seems like a small space and it isn’t something that is regularly seen by visitors. However, you probably spend some time in there and would like it to be a little nicer. A new tub, vanity and sink are all great ways to make the room look more inviting, but they can be a little out of your price range. What if you could spruce up the bathroom for less than a couple hundred dollars? An electrician in Burbank can help you transform your bathroom with a few simple light changes. It is that easy and the crew at The Electric Connection would love to help you make it happen.

You can do so much more than the standard light in the center of the room and the typical large bulbs around the bathroom mirror. You can enhance the bathroom with soft lights that are great for those times you just want to soak in the tub and relax. A Burbank electrician can install a dimmer switch that will allow you to control the amount of light that floods your bathroom. You can go for a little or a lot.

Wall lights that resemble the old fashioned candles are beautiful and really add character to the bathroom. Recessed can lights are also a great option for the bathroom and shed a great deal of light without taking up any head space. Another feature many enjoy is the heat lamp installed by an electrician. Burbank residents will love stepping out of the shower into a heated room. It is also great for keeping the humidity down in the bathroom, which will go a long way to preserving the paint and woodwork. Give The Electric Connection a call today and schedule your bathroom lighting renovation.