38 million people in the U.S. that has migraines or study published in a 2016 issue of Brain shows that green LED lighting reduced pain intensity by 20 percent. In the study, “Migraine photophobia originating in cone-driven retinal pathways,” researchers at the Beth Israel Deaconess Medical Center set out to test whether or not colors can affect photophobia and migraine intensity. Photophobia is sensitivity to light and can be associated with pain and migraine exacerbation. Findings in a previous study fueled the motivation for this study. In the earlier study, the researchers found that blind participants experienced increased migraine pain when exposed to blue light.

Sixty-nine participants with migraines were part of the most recent study. Researchers studied the effects that exposure to white, blue, green, amber, and red low-intensity light had on their pain. Blue and red light were the worst—increasing pain by 18-19 percent. White and amber increased pain by 15 percent. Green was the only color that reduced pain.

Another green-light study found that exposure to low-intensity light from green LEDs reduced chronic pain and migraine severity. In this study, eight participants with fibromyalgia or migraines were given a green LED strip light, and five were given a white strip. Participants were asked to use their strips nightly for one to two hours for 10 weeks. Participants with green LEDs reported a 40-50 percent drop in pain.

The study was so successful for some that they asked to keep their green LED strip lights; they continue to use them in addition to or in place of medicine. In a study was published in a 2017 issue of Pain. The University of Arizona study, “Long-lasting antinociceptive (pain blocking) effects of green light in acute and chronic pain in rats,” found that rats experienced an increased tolerance for thermal and tactile testing methods. These tests measured how long it took for the rats to withdraw their paw when exposed to heat or pricked with a filament. Testing was completed under green or white light. The researchers found that after eight hours of green LED light exposure for five days it took much longer for rats to withdraw their paws. Effects of the green LEDs lasted for four days.

Rajesh Khanna, UA associate professor of pharmacology and senior author of the study, reports that, “While the pain-relieving qualities of green LED are clear, exactly how it works remains a puzzle. Early studies show that green light is increasing the levels of circulating endogenous opioids, which may explain the pain-relieving effects.”  In a UA article, “(Exogenous) Opioids, while having many benefits for managing pain, come with serious side effects.” These medications can also be addictive.

Researchers in this study are not advising people to stop their medications without speaking with a professional. However, it is possible, as in Lesneski’s case, that green LED lighting could eliminate the need for them in the future. “We need safer, effective and affordable approaches, used in conjunction with our current tools, to manage chronic pain,” Ibrahim said.

Someone would think that a bulb is a bulb is a bulb; well that isn’t really the case. Anyone who has bought a light bulb will know that there is a large variety to choose from. These bulbs don’t vary only in terms of their illuminating power, size and application, but in type as well. It can be quite a challenge to choose the right light bulb for your home.

However, it’s important to understand that something which is in vogue need not always be the best solution for your home, your energy bills or even the environment. You should be aware of the different types of bulbs available in the market and what their properties are.

This will help you make a more well-informed choice and will help you save on energy costs too. When you are choosing bulbs for your home the factors you should keep in view are the upfront cost, light output, the settings and fixtures the bulbs can be used in, energy efficiency and how environment-friendly they are.

When it comes to home lighting in Australia, there are 4 different types of bulbs you can choose from. Let’s take a look at their features and how they stand up against each other in terms of efficiency, cost & environment-friendliness. Just as home design trends come and go, so also is there a change in home lighting trends.

The upfront costs for these bulbs are very low (it’s also why they are so popular), but they are expensive to run. These bulbs produce a warm light and are a good option for lesser used areas like a laundry or bathroom. The Government doesn’t really recommend using these for general home lighting as they are inefficient and because their running costs are higher. In fact, the Government is also making every effort to phase out these bulbs. They are doing this by introducing MEPS (minimum energy performance standards) for all lighting products.

These bulbs use tungsten elements and have higher efficiency levels compared to incandescent ones; they are longer lasting too. Unfortunately, there are many disadvantages to halogen lights. Typically, these lights are best used to light smaller areas that require focused lighting. However, most people tend to use them to light larger spaces and they end up consuming much more electricity than they should. The Government is phasing out certain types of halogen lights too.

These are a very popular choice and many homeowners use them. They are energy-efficient, have a lifespan that’s 4-10 times longer than that of any incandescent bulb and are available in cool/neutral/warm tones. They are more expensive than incandescent bulbs, but are far cheaper to run in the long term.

Today, these are proving to be a highly efficient alternative to CFLs or incandescent bulbs. Their initial cost is significantly higher, but they offer 80% energy efficiency and last for a number of years. Since they last for so long, they are easy to maintain and are a good home lighting choice.

For any additional information about the different types of bulbs and advice on which type will be best suited for your usage and home, call Allround Electrical at 1300 169 263 and speak with our experts. We can provide you the best electrical solutions at the most reasonable pricing. You can also drop us a line via email or use this contact form and we will revert without delay.

Thanks for reading,1300 169 263

Are you looking for energy saving tips to help your business reduce annual energy costs? Businesses consume far more lighting energy than homes, so if you’re looking for a simple and cost-effective place to start, addressing your business’s lighting solutions offers ample opportunity.

“Out with the old” should be your mantra here. Incandescent light bulbs are far from efficient, emitting 90 percent of energy as heat – not light.

The curly cousin of long-tube fluorescents, CFLs can be used in place of incandescents in standard light sockets. They contain mercury and should be handled with care; however, they use 75 percent less energy and last 10 times longer than incandescents.

Lasting 25 times longer than incandescents and using 75-80 percent less energy, LED lighting options have recently come down significantly in price. To get the most bang for your energy buck, LEDs are a top choice.

High intensity discharge lights are extremely efficient at producing large quantities of very bright light and are an excellent choice for warehouse and commercial settings. Be sure to talk to an electrician to get the best color spectrum to suit your needs.

Using 1/5 to 1/3 the energy as incandescents and lasting 10 times longer, these fluorescents offer flexibility in various commercial settings.

Twice as efficient as incandescents, halogens produce a very bright white light that is well-suited for outdoor applications such as security and stadium lighting.

Light dimmers and timers deliver just the right amount of light just when you need it, reducing energy use and costs. They also improve security while you are away and can enhance the functionality and ambiance of your business.

The future of lighting, we’re not talking battery-operated, but fully automated lighting powered by remote control and smart device applications. The technology of this solution offers you the capability to monitor usage and costs, with the added convenience of on-site and remote functionality.

Mr. Electric® will perform a complimentary evaluation of your current setup, analyzing for efficiency and function and offering lighting options that can lower your operating costs significantly.

Designed to your specifications, our experts can design custom lighting solutions that perform well and look great – all while keeping energy costs under control.

Security, landscaping, parking, retail – you name it! Whatever your lighting needs, Mr. Electric will spotlight your perfect solution.

Schedule a commercial electric energy audit today. A commercial energy audit can offer even more energy savings tips for the benefit of your bottom line. Mr. Electric can:

Don’t let excess energy costs drag your business down, get the energy saving tips you need with the help of Mr. Electric today!

Zinsco or GTE-Sylvania panels were incredibly popular during the 70s. Despite Zinsco no longer being around today, many homes still have these panels inside. The circuit breaker in these panels can melt to the main bus bar, hindering the breaker’s ability to trip when it needs to. If there is a short circuit, the wires can melt and cause a fire. Not all Zinsco panels are at risk, so have an electrician look at yours if your home has one.

Federal Pacific Electric panels are extremely unsafe, despite being installed into millions of homes throughout the 50s to 80s. These panels’ circuit breakers fail to trip when there is a circuit overload or short circuit. If a panel’s circuit breaker doesn’t trip when it’s supposed to, it can lead to an electrical fire in your home. If your breaker box has “Federal Pacific Electric” written on the front and “Stab-Lok” branded on the inside of the panel, your home could be at risk.

Fuses boxes are not inherently dangerous. In fact, many homes have fuse boxes and are not at risk. The risk with fuses comes from using them in an unsafe way to serve today’s energy demands. By placing too many things on a single circuit, replacing a fuse with a bigger fuse, or replacing the fuse with something metal creates a potential fire hazard.

Again, these kinds of panels are not dangerous by themselves. What makes them dangerous is the fact that they haven’t been used for over 40 years. If your home has a split-bus electrical panel, it could be past its expected lifespan. The circuit breakers may not trip as they are designed to.