While some might think of a garage as simply another room where you park your car and use as storage, it’s still part of your home and could be the cause of a higher energy bill. Helping make your garage more energy efficient will in turn lead to higher energy savings for your home.

Find out how to keep your garage energy efficient while saving money with our simple tips.

By insulating your garage and garage doors you can help keep the use of your HVAC down during the cold months. Garage doors tend to have several openings from which cold air can go through, causing the HVAC system to kick in more frequently than usual.

Turning down the temperature of your water heater to 120° F helps keep the water comfortably warm while reducing on unneeded energy waste. Lowering down the heat while on vacation also results in lower energy consumption.

Other tips for your water heater include purchasing a unit with a high Energy Factor (EF) rating that is more energy efficient, and routinely draining a bucket of water to help remove sediment that could cause issues.

Using warm or cold water instead of hot water to wash your clothes helps save energy up to $50 per year. Consider also investing in a front-loading washing machine, which use less water on average than traditional models.

When using the dryer, make sure to add a dry towel to help reduce the drying time. Keep yourself from running an additional cycle by not overloading your washer and dryer, which will cause your clothes to not be cleaned properly, and take significantly longer to dry. Cleaning the lint screen after every load helps keep the exhaust clean while reducing drying time and energy usage.

With the rise of energy efficient electric cars comes the need to keep a steady supply of fuel at home. Electric vehicle charging stations are a good choice, but oftentimes a faulty installation could lead to more serious problems down the line if installed incorrectly.

Having a professional and qualified electrician install EV chargers helps ensure that the correct voltage is being used and that the amperage will work best for your needs. They will also help you choose the correct model so that the installation location fits the length of the charging cable.

Garages are the perfect place for a handyman’s work station or home office and as a result, many might have power tools and various other electronics connected at all times.

As we mentioned in our energy guide for the living room, vampire appliances could result in wasted energy and time on standby mode. So if you’re using power tools or any other electronics, make sure to unplug them after use to help keep the costs down.

Light bulbs usually consume more electricity than an LED so replacing them is a wise choice. LEDs not only help reduce your carbon footprint, but they also need to be replaced less frequently and consume less energy making them a perfect energy efficient option.

Often times, the lights will be left on as you forget and move to other rooms in your home so consider investing in a light timer which can automatically turn the light off after a set amount of time.

While having a spare refrigerator or freezer in your garage might be a good idea for keeping spare food safe, it’s often wiser to get rid of it or replace it with a more energy efficient model.

If you’re not ready to get rid of the appliance, at least unplug it to help keep unneeded energy from being wasted.

Electricity may either be connected by 230 or 240 volts (these are called single phase circuits that are installed in most residential applications), or 400 & 415 Volts (3-phase). The latter are typically best-suited to provide power to heavy-duty appliances and equipment and in industrial settings as well as larger commercial applications.

Some people have electric kilns installed in their homes or garages because they indulge in making pottery or ceramics products. Certain homes have very elaborate and large, ducted air-conditioning systems. In all these situations, a 3-phase circuit would be required to support this heavy power usage.

The type of circuit used is dependent in the equipment or appliances installed on your property. It is important that you check the power & voltage requirements of the installations properly, before deciding what type of circuits you need. In most instances, even massive ovens and high energy-consuming heaters are typically singe-phase.

This current in amps has to be multiplied by the voltage to give you the power in watts. If a 3-phase supply is available, the total voltage of 24,000 watts will be divided by 3; this means 8000 watts will be used in each phase. This means the current in each phase is lower than 1/3rd of what it generally is in a single phase power supply (about 30 amps in each phase instead of 100).

The aspect to keep in view here is that if you have a 3-phase electrical connection, you will end up paying higher connection fees for it. In addition, you would have to pay fixed annual charges for 3-phase as well, so you shouldn’t be considering it for your new home unless it’s really needed.

Depending on the locality you live in, your property may also be connected to a SWER electrical line and many country areas have them. The SWER (single wire, earth return) delivers single-phase power. It is a very economical way of power distribution since it requires only a single transmission or active line. The earth is used as the return conductor and there is no neutral line.

In case you need to use any 3-phase motors in these settings, you would have to get a single-phase to 3-phase converter installed. Choosing the right phase is crucial to the optimal working of your equipment and for the safety of your property as well.

It’s always easy to tell when summer rolls around.  The temperature outside soars, and so does your electricity bill.  Wouldn’t it be great if a top Dallas electrician could save you money on your electric bill?

Everyone knows why your bills get so expensive; you’re running your AC almost all the time.  In fact, the condenser for your air conditioning unit uses more electricity during the summer months than any other appliance in your home, even notorious energy hogs like your refrigerator. There are things an electrician can do to save you money, and electric safety tips you need to know to protect your home, business, and loved ones from disaster.

These days most people call an AC service company the minute an air conditioning problem comes up.   That isn’t always the correct move, though.  In my experience, about half of all the problems that arise with air conditioning systems are electrical problems.  Some of my best customers began using my service because I could help them figure out whether they should be calling an electrician or an HVAC technician to solve their problem.  Obviously, if the problem is the AC unit or condenser, an AC repairman is the way to go, but he doesn’t necessarily understand the details of your home or business electrical system.  There are a few things you should know about your air conditioner from the electrician’s point of view.

When the day comes for you to retire from work, you might find yourself with a lot more free time and a lot less money. Hopefully, you've planned your savings so you don't have to live your golden years on a shoestring budget, but in any scenario, it’s wise to rein in your spending once you're no longer receiving a regular paycheck. Read on for some advice on how to cut back on your energy usage after you retire and keep your monthly bills under control.

Combat Rising Utility Costs

Unfortunately, most people's energy bills actually go up after they retire. What's the difference? Now that you're home all day, you're paying to heat and cool the house and to power electronic devices during the hours you used to spend at the workplace. Essentially, you lost a little-recognized fringe benefit, since your employer used to pick up the tab for electricity and climate control eight hours a day.

To compound the issue, many retirees are recent empty-nesters as well. With the kids out of the house, you probably experienced a sharp downturn in your utility bills. Now, you'll be all the more likely to notice when they spike back up once you stop going to work.

You Have the Power to Save

You don't have to give in to sky-high utility bills, however. Check out these suggestions on how to save:

For a more thorough analysis of your individual circumstances, don't hesitate to contact an expert to conduct an energy audit on your house. You could see significant savings and enjoy your retirement all the more.

DC motors are electrical devices which draw electricity (direct current) and convert it into mechanical energy. They have many uses in today’s industries, even though alternating current is the preferred choice for mains power supply. They are especially useful for machines that need to be driven at variable speeds.