You should never “lend” your contractors license to anyone, for any reason, ever. There are many good reasons for a contractor to have this “never lend” policy.

However, sometimes it can be advantageous for a contractor to pull a permit for someone else’s work. Like a homeowner installed his own main electrical panel and then he finds out that his city does not allow homeowners to obtain a “Homeowner’s Permit” for that job.

Without going into a lot of explanation, here is a form I made up a few years ago that has minimized my risk and maximized my profit in these situations. WARNING! Is this legal in your state? I’m not the guy who knows or is going to find out; that’s up to you. But, anyway, here’s the form:

I _____________________ am requesting that The Electric Connection

Print Name

obtain an electrical permit for electrical work located at

__________________________________________________________

Address City State Zip

I am aware that The Electric Connection did not perform this electrical work and is not responsible for any corrections or repairs required as a result of either the electrical work or the inspection of this work.

I am aware and agree that The Electric Connection is obtaining a permit for work that was done by others and that The Electric Connection is not responsible for the quality and/or safety of this work now or at any future time, and that The Electric Connection is not responsible for any present or future liabilities arising out any of the work covered under this permit.

For the sum of __________ plus the exact cost of the electrical permit, The Electric Connection will obtain an electrical permit for this electrical work. If the electrical work does not pass inspection, I may or may not choose to hire The Electric Connection to make any corrections necessary to bring the electrical work up to city/national electrical code standards as required by the electrical inspector.

If I choose to hire The Electric Connection to do this electrical work, I am aware that there will an additional charge for this work, and that this additional cost will be mutually agreed by myself and The Electric Connection before any work is started.

________________             ___________________ Signature                                    Date

———————————————————————————————-

Visit our company profile.

]]>

Energy Efficient Lighting Solutions for Aging Eyes

As people get older there is more time to really enjoy the homes they have built for themselves. The kids have grown and moved away, and being physically comfortable has, perhaps, become more important than it once was.  Knowing that aging eyes need a better kind of light and more of it to be comfortable, remodeling the lighting in your home improves comfort threefold.

“Baby boomers are finding that they need three to four times as much light and that glare is hard on the eyes,” says Norm Brown, CLC, of Norburn Lighting & Bath Centre in Burnaby, B.C., and a consultant for the American Lighting Association (ALA). “Fluorescent light bulbs are easier to see by than regular light bulbs. LED lights are being used more for their reduced glare, as well as Halogen, for their white light quality. You can choose energy-efficient bulbs in many styles for redecorating your whole house.”

Capitol Lighting offers ceiling, wall-mounted and portable fixtures, and recessed and track lighting in energy efficient compact fluorescent bulbs as well as light-emitting diode (LED) lights to help aging eyes. Shop from thousands of fluorescent lights and energy efficient lighting solutions when remodeling your home’’s lighting at 1800lighting.com today! Aging eyes can see more clearly with energy efficient lighting solutions from Capitol Lighting.

If you’re in the midst of a renovation or simply rearranging your floor plan, then you’ve likely come across the need to add or relocate a light fixture. Maybe your new dining room table is a little wider than the old one, you’re adding a kitchen island with pendant lights, or you’ve finally convinced your significant other to let you get that pool table you’ve always wanted. In any case, you need to move or add a light fixture – but how and when?

First, it should be noted that, contrary to how it may seem, most light fixtures are not connected to a joist or even drilled into wood. Instead, hanging light fixtures and ceiling lights alike are located between joists and supported by electrical boxes that grip a wide surface area of the sheetrock that makes up your ceiling to support the weight of the fixture below; for heavier fixtures, like large chandeliers or ceiling fans, there are larger, even joist-secured boxes that will need to be used.

If you’re moving a light fixture, it is important to note that there are certain limitations as to where the fixture itself can go. If you wish to relocate the fixture to a place where a joist exists just above, then you’re likely going to have to use a swag hook and chain to anchor the fixture in place, as a box under a joist is not an option. That said, if you’re moving the housing for the fixture itself, you’ll need to know which direction the joists above run, then choose to move it either through the same joist cavity or drill through a joist to run the current wiring to the new housing. Other things to consider include which switch controls the light and where it is located, as it is a safe bet that a wire will have already crossed all joists above (at some point). This can prevent your electrician from drilling needlessly by allowing them to fish the wire back to the earlier point. If your switch is further away than the destination, you can bet they’ll have to do some drilling. Jumping through, between, and around the joists in the ceiling represents the largest obstacle your electrician (and light fixture) will face.

Once your location is set, all that is left is to get your electrician out to assess and perform the work for moving your box. If you’re planning on doing one large fixture over a pool table, island, or entire room, then you’ll want to take into account the power output of the fixture compared to what that circuit can safely allow for as well as the weight of the fixture. A typical rule of thumb is that anything under about 35 pounds can be handled by a standard drywall box, but something more (or with a fan) will need extra stabilization. Surprisingly, if you’re running numerous small pendant lights, the electrician may have an even easier time running the circuit and ensuring that your lights are up and running in no time. Just be sure to discuss the fixtures you have in mind with your electrician before you purchase them to know what they believe your limitations are!

Whenever you need electrical work done around your Des Moines home, contact the experienced professionals at Electrical Gurus. We are proud to offer the finest licensed local electricians in the area and are always more than happy to help out on your household projects.