Entertainment systems have come a long way since the days of televisions with single mono speakers that plugged into a wall and used antennas. Today, you can have an entire home theater experience with digital 2K projection technology, 7.1 discrete audio channels with lossless DTS-Master Audio HD sound, video game consoles, and streaming technology bringing you entertainment from more sources than anyone could have dreamed of only a decade past.

This does mean a far more complex electrical wiring network, however. The old-fashioned TV simply needed to plug into a wall, and that was it. If you want a full home theater set-up, it’s almost essentially a room renovation or new room addition as far as the electrical wiring is concerned. Nowhere else in your home will have as many appliances requiring electrical power at the same time.

One of the reasons to have professional assistance with this task is that you will want as much of the wiring as possible, such as those running to the speakers, to remain hidden within the walls. Electricians can make this task much simpler and take away the need to rip apart your walls to have the wires installed.

Electricians can also help you protect your home from electrical power surges that an entertainment system can cause; we advise our customers to look into whole-house surge protectors as part of a large-scale entertainment add-on: the basic power strips are not sufficient on their own to protect from the problems of major power surges.

Electricians can also help you upgrade outlets and your circuit breaker panel to accommodate the higher electrical demands. If you have older two-prong outlets, you definitely need those replaced with grounded outlets.

Water and electricity make a dangerous combination. That's especially true in your bathroom, where you use water from the sink and shower to clean yourself, but also rely on electrical devices like shavers and hair dryers. That's why you need to take special care with your devices in the bathroom to protect yourself and your family from shock, electrocution or fire. Read on for tips on how to ensure safety when it comes to the electrical work in the bathroom.

Bathroom Electrical Safety is Paramount

Water is essential to human health and hygiene. Unfortunately, it's also a great conductor of electricity. That means that you could receive a severe shock when you are standing in water, and even wet skin allows electricity an easier path to pass into your body. Electrical shocks can cause burns, heart arrhythmia, nervous system damage and death, and bad wiring or improper grounding can also start a fire. That's why safety in your bathroom electrical work should be one of your primary concerns. Follow these tips to avoid an emergency:

Don't Leave the Quality of Your Electrical Work to Chance

In addition to these tips, certain requirements about the installation of electrical work in bathrooms are found in local municipal codes as well. For all the electrical work in your bathroom, make sure you hire a qualified electrician who can adhere to all of the applicable quality and safety standards.

One of the most frequent questions we hear is, “What’s the most energy-efficient light bulb I can use?” At Kolb Electric, we’re here to help you choose the best type of lighting for your Maryland, DC or Virginia home, and we want you to be well-informed about the energy efficient options that are out there. If you’re wanting to save even more, here’s everything you need to know about energy efficient lighting.

The two main choices for energy-efficient lighting in your home are light emitting diode (LED) and compact fluorescent lights (CFL). Both are a good choice, and both have unique benefits and drawbacks. Making the decision between the two requires a proper understanding of these benefits and drawbacks.

These two lighting options are so much more efficient and beneficial to the environment that incandescent bulbs have been gradually phased out in the United States. By 2020, all general-purpose bulbs must be able to produce at least 45 lumens per watt, which is a similar efficiency as that of CFL bulbs. It is becoming increasingly difficult to purchase traditional general-purpose incandescent bulbs in light of this phase out, though specialty bulbs are still available.

LED bulbs create light using a semiconductor to generate light energy. LED bulbs use about 1/30th of the energy used in incandescent bulbs and 1/3rd the energy in CFLs. They also last a long time—as much as 35 times the lifespan of an incandescent bulb—so you don’t have to worry about replacement regularly. With the energy savings and longer lifespan, estimates indicate you can lower your carbon footprint by as much as 85 percent simply by switching from incandescent technology to LED technology.

With an LED bulb, you can light your room with bright light and minimal energy use. Also, these bulbs generate very little heat energy, which means they are safe to touch. They are also quite durable and do not break easily, which means they are the preferred option for hard-to-reach places where a delicate glass bulb is in danger of shattering.

If that makes LED lights sound perfect, you need to know the one main drawback. LED lights are one of the most expensive options for lighting your home. While they lower your energy bills and have the longest lifespan of the available options, if your upfront budget is low, then this option may not work for you.

CFL bulbs bend a traditional fluorescent tube into a light bulb-shaped configuration. These are more affordable than LED bulbs and significantly more efficient than incandescent bulbs, but they don’t quite last as long or save as much energy as LED bulbs.

With CFLs, you are able to lower your energy use by 60 percent as compared to incandescent bulbs that provide the same amount of light. They last about 10 times as long as incandescent bulbs, so you have less frequent need of replacement. While not as cheap as incandescent bulbs, CFLs are priced around $4 to $15 a piece. This is a more moderate price point than LEDs.

So why would you overlook the CLF in favor of LEDs? CFLs are more efficient than incandescent lighting, but they are not as efficient as LEDs. If you’re looking to have the most efficient option on the market, CLFs are not that option.

The answer to which lighting option you should choose depends largely on your goals. Is your goal to have the most efficient lighting available? Then you want LED bulbs. Are you adding a light bulb to a place that is hard to reach or not accessed regularly? The longevity and durability of LEDs makes them the best choice for this. Is your goal to go efficient while on a tight budget? Then CFLS will work best.

Regardless of the choice you make, both CLFs and LED lighting help you save money, lower your carbon footprint and do your part to make the world a better place with less environmentally damaging waste. If you’re curious about which lighting option will best meet your family’s needs or have further questions about the differences between LEDs and CFLS, Kolb Electric is here to help. Contact us today to have all of your questions answered!

Holiday season takes on a life of its’ own and we are in the thick of it.  One more gift to buy, one more light to shine, one more guest to add to the table…   Take precautions to make sure you know just who and what you are inviting into your home.

Illuminate your home to the fullest, but know your lighting facts and be safe.  Check all lighting products for safety and buy all lights and electrical supplies from a reputable dealer.

Look for lighting showrooms that are backed by the American Lighting Association (ALA).  Check for a certified UL-Mark on all lighting products.

Decorative strings of holiday lights, Christmas Lights and novelty lamps from Bulbrite are of the best quality…

Get to know your lamps and lighting for a Safely Illuminated Holiday Season.

1.  The item has been evaluated and tested by certified-UL engineers to meet all UL safety requirements.

2.  The product is ensured against the risk of fire and electric shock as long as all safety instructions are followed according to the package directions and proper usage.

3.  UL’s green holographic label indicates that a product is for indoor-use only.

4.  UL’s red holographic label indicates that the product may be used indoors or outdoors.

5.  UL evaluates decorative lighting strings in accordance with the requirements described in the UL/ANSI 588, the standard for Safety of Seasonal and Holiday Decorative Lighting.

The Wonderland of Christmas pier lamp from Meyda Lighting is UL-approved for both indoor and outdoor usage.

The ANSI designation indicates that the American National Standards Institute approves the UL Standard as the American National Standard.

Elegant crystal table lamps from Schonbek are enchanting.

Accent lamps in crystal from Schonbek bring exquisite colors and sparkling brilliance to the table.

Find the best light fixtures and lamps for your holiday celebration at Capitol Lighting showrooms or visit 1800lighting.com, an ALA member showroom and company.  Lighting showrooms that are affiliates of the American Lighting Association (ALA) will only carry lighting products that have been tested for safety and are certified with the UL-Mark.

If you are thinking about beating the heat this summer with a new pool in your backyard, you will need to hire an electrician in Pasadena to complete the wiring. A new pool is an exciting toy that will lead to hours of fun for the whole family and of course, family friends. There are plenty of tools needed to keep your pool clean and safe to use. Tools like filters, pumps and heaters if desired, all require electricity. Water and electricity do not mix so it is important an experienced electrician, like those at The Electric Connection, complete the wiring for the pool to ensure it is safe. Even if you are choosing to go with an above ground pool, there is still some electrical that will be needed to operate the filter and pump.

The following are some of the things that will need to be addressed when bringing your pool up to Pasadena electrical codes.

*Depth of the wiring must be buried at least 18 inches for PVC conduit or 6 inches deep for EMT conduit. Your electrician can discuss this in more detail with you.

*Your pool will need a dedicated breaker and outlets to run on. The outlet needs to be no closer than 6 foot from the pool’s edge and no farther than 20 feet from the pool. This is the receptacle that will be used to power your filtration system, pump, heater and an automatic pool cover if you choose.

*Lighting inside the pool and around the pool area will also need to be installed by an electrician.

If you home’s electric panel is already maxed out, you may need to have a sub-panel installed to run the various equipment needed to keep your pool in tip-top condition. Give The Electric Connection a call and schedule an appointment to discuss your pool installation needs.