What is Radiant Floor Heating and what are the advantages of it?? We get asked that often.

Radiant floor heating is the best heating system a house can have and one that you don’t realize it is there! Just imagine: no radiators clanking in the night and no vents whooshing like a jet preparing for take off!! No dust – collecting ductwork that runs up your allergist”s bills. That’s the advantage of radiant floor heating. It is an even blanket of heat, right where you want it. It’s also a highly efficient way to heat a house, increasing comfort as it reduces energy costs.

This is how radiant heat works – In a radiant setup, the warmth is supplied by hot-water tubes or electric wires buried underneath the floor. As the invisible waves of thermal radiation rise from below, they warm up any objects they strike, which radiate that captured heat in turn. Though the air temperature remains relatively constant, you stay comfortable because the surrounding surfaces aren’t stealing warmth from your body.

Contrast that with what happens in a conventional forced-air heating system, the kind found in most homes. Air blows out of the registers at a well-baked 120 degrees, rises to the top of the room where it quickly sheds heat, then drops back down as it cools. The air in the room becomes uncomfortably stratified: Your head can be bathed in warmth while your toes lie in the frozen zone. Then there’s the problem of cycling. “You turn on the furnace, it quickly takes you to 68 or 70, and then shuts off. The result is a phenomenon he calls “the cold 70,” which is what you feel right after the hot air stops pumping from the registers. Those jarring ups and downs are absent with radiant floors, which may reach 85 degrees, tops, on a frigid day. The warm air still rises, but it does so evenly over the entire floor, so the coolest air stays up at the ceiling.

The world is getting more connected, and machines are collecting massive amounts of data about consumer habits. In the energy sector, the rise of big data is poised to revolutionize the way utility companies provide electricity to homeowners. That's good news for you – the more information you have at hand, the more opportunities you’ll have to save money. Read on to find out how big data may affect you in the near future.

Machines Learning the Patterns

Analyzing the patterns inside the enormous amounts of information provided by big data is known as machine learning. By letting computers do the heavy lifting, analysts can discover trends and efficiencies that no one would ever think to look for. Ultimately, what we learn from data analysis will trickle down and impact your interactions with any appliance or device that is electrical. Work conducted by machines will show humans the best way to move forward.

IntelligentUtility.com recently listed seven ways that machine learning can affect the relationship between you and your utility provider:

In the meantime, if you need tips about how to save energy or need electrical work performed on your home, call a qualified electrician today.

The design process is complete, and the Thronedown Challenge is about to commence.  The votes will be cast and the crown awarded to the champion designer. Capitol Lighting followers can visit our company’s Facebook page to vote, while showroom customers and employees can get a live look at the renovations in order to choose their favorite design and cast their ballots.

This friendly competition between two northern New Jersey interior designers has involved weeks of hard work, resulting in a transformation of  both the men’s and ladies’ restrooms in Capitol Lighting’s Paramus store. The finalists were chosen based on their expertise; they each received a $2,000 project budget with lighting supplied by Quoizel and Feiss.

Before

After

Mannarino’s vision was to create something sophisticated, dramatic and tailored. Her step-by-step design process included:

LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.