Because of our home state’s ample supply of oil, Texas isn’t always the first place that comes to mind when people hear the term “green energy.” However, recent research is showing that Texans may be embracing renewable solutions more than the rest of the country is giving them credit for.

A new report released by Choose Energy, a San Francisco-based company that helps people choose energy plans within deregulated electricity markets (like that of Texas) revealed some data that may surprise people. The company found that Texas residents select 100% green energy plans more than any other state, with 1 in 3 customers choosing renewable-sourced electricity plans (i.e. electricity coming from wind or solar power). That’s more than both Connecticut and New York, two states that most people would expect to have exponentially higher numbers of green customers. However, in both markets, fewer than 10 percent of customers were selecting green plans.

We generate more electricity than any other state in the U.S. In 2012 alone, Texas pumped out 14,201 trillion BTUs of electricity. To put this number into perspective: Montana, the nation’s #2 producer of electricity, only generated 9,611 trillion BTUs in the same year.

But not only do we produce the most electricity, we also produce more green energy than any other state! We have over 100 wind power plants across the state. In fact, we lead the nation in wind-generated electricity. The U.S. Energy Information Administration reports that in 2013, our state generated around 36 million megawatt hours of electricity from wind energy. If that weren’t enough, our solar industry continues to grow as well.

Renewable energy is both plentiful and affordable in the Lone Star State, so it makes sense that more and more customers are jumping on the green bandwagon every year. But Choose Energy also suggests that even in situations where green energy might be more costly than “brown” energy, Texans still opt for the more environmentally-conscious plan in support of energy independence.

Even with our reputation as an oil-friendly state, Texas is leading the way in green electricity. As a company committed to reducing our own energy consumption and creating a healthier, safer world, we’re excited to see so many people adopting renewable, sustainable solutions for their energy needs. When consumers purchase 100% green plans, it increases the demand for efficient energy, which propels the green sector even further into success.

There are a number of times when homeowners take up DIY projects; not only do these help you save money, but many people find the idea of doing some of this work around their home, extremely fulfilling too. While it’s okay to do some carpentry or painting work, it’s best to leave electrical jobs to the experts; and there are a number of reasons for this.

Many people feel that they may be able to handle some basic electrical jobs themselves; but the fact is that electrical systems and installations can be quite complex and it’s not easy to tackle them. Apart from this, it’s required by law that you hire a licensed and insured electrician for any work on your residential or commercial premises. Take a look at how and why DIY electrical jobs can do a lot of harm:

There are a number of wire sizes available; this is called the gauge of the wire and this determines the application it’s going to be used in. If you accidently choose and install the wrong wire, this can cause it to heat up and the circuit breaker may trip. This is why it’s important to use wires and devices that are rated correctly for the amperage that’s required in a particular location.

If the switches and outlets have been installed loosely, that can present a hazard once the appliances have been plugged in. If the wires come loose from the terminals, that can result in overheating and arcing.

The reason for an electrical box installation is to provide the connections the right amount of protection from the external elements. This is also why it’s extremely important to ensure that no electrical connections are made outside these boxes. The other thing to keep in mind is that the electrical boxes should only be filled to a certain capacity. Adding too many wires and connections in a single box can result in overheating; in some cases, it can also result in short circuiting.

This happens to be one of the most common causes of electrical fires. When fuses keep tripping or blow, property owners may end up replacing them with breakers or fuses of a larger size. If a fuse trips very regularly, it’s first crucial to identify what is causing it to trip; that root problem has to be addressed by a licensed and insured electrician.

The connections inside the fuse box should all be tight and when they are replaced, the positioning should be right. In case the connections come loose, you might find the lights flickering or being cut short. In severe situations, there could be overheating of the connections too. The precaution to take here is that before you start with any inspection, you should first switch off the breakers.

This is one mistake that many people tend to make; they end up overloading the powerboard or the outlet. It’s important that you check how many amps a circuit can bear and then plug in only the type of appliances that aren’t going to overload the board. Appliances such as air conditioners, dishwashers and refrigerators etc. can overload the circuit, if it exceeds the amperage of the board .

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Most homeowners typically don’t give their electrical systems a whole lot of thought, and we wouldn’t expect them to. However, with the increasing demands we place on these systems—with the purchase of high efficiency appliances and devices such as smart phones and tablets—it is important to consider your safety as well as the effectiveness of your electrical system.

One of the most effective ways to keep your electrical outlets throughout your home as safe as possible is by installing Ground Fault Circuit Interrupter (GFCI) outlets in areas that need them the most. These areas include places where you use plumbing, since the main function of these outlets is to shut off the power if there is any risk of electrical shock near a water source.

Chances are, you already have a couple GFCI outlets installed somewhere in your home. You’ll recognize them as the outlets that have a “test” and “reset” button. As mentioned above, they are most used in areas with water sources—so bathrooms and kitchens. However, if you have an older home with outdated wiring, this may not be the case. In some cases you might even need rewiring services just to allow for the installation of GFCI outlets.

While bathrooms and kitchens are the most important locations for these outlets, they are not the only spaces that will benefit from them. You may want to consider GFCI outlet installation in your laundry room, crawlspace, basement, utility room, or even your garage.

Many homeowners with small children choose to update the entire home for safety purposes. Additionally, you might want to consider Arc Fault Circuit Interrupter (AFCI) outlet installation as well. Unlike ground faults—which can lead to electric shocks—arc faults are caused by damaged wires and can lead to fire.

Whether you have a spacious and expansive wraparound porch or a cozy stoop to welcome you inside, the front porch is the perfect place to establish a mood that flows throughout the home. Today I’ve rounded up a unique collection of front porch decorating ideas that celebrate the beauty of Spring with bright colors and endless charm.

Springtime is all about freshness and a world ablaze with color. This bright DIY welcome mat filters out both the dirt and the troubles of your day.

I’m a big fan of coming up with Etsy.)

Unique ways to display a bounty of your Spring flowers abound in these fresh front porch planter ideas that are anything but predictable.

via submersible LED tape lights to your water feature.

As you welcome your friends and family into your home this year, there are many ways to welcome Spring too. Small touches and pops of color are simple ways to turn your front porch into a bright and cheerful space to invite guests into the home.

When you see your kid crawling or walking for the first time, it’s monumental. This is something you simply do not want to miss. But as you’re trying to get a snapshot of this wonderful moment, a thought pops into your head: My child can now go anywhere in this home. You now begin to see your home differently. All of a sudden it feels like a danger zone. The loose wires over there. The dangling electrical cords right here. The numerous empty electrical sockets that appear so inviting to tiny hands.  Before you panic, though, let us put you at ease! Follow these simple tips for childproofing your home!