One of the most devastating things that can happen to your business is an extended loss of power. Without power, you lose valuable business hours and revenue. Business interruptions of this nature are not necessary though, even if it’s the result of a strong snowstorm.

Being well-equipped with a quality commercial generator is essential to keeping your business running effectively and efficiently during a severe power outage. Understandably, you may have questions before purchasing such a system. We’ve tackled a couple of our most frequently asked below.

Every commercial property is different, and therefore your needs will be different as well. Your generator will be sized on the electrical load that it will be tasked with carrying. The actual square footage of your building does not play a factor in this, as it would for an HVAC system or commercial water heater.

Your new generator must meet your specific requirements so that it’s able to do its job without accumulating undue stress on the unit or damage to the devices connected to it. Accurate sizing involves a number of factors and considerations, which our service professionals are happy to assist you with.

If your commercial generator is well-maintained and used properly, then it will run as long as fuel is being supplied to it. How often it needs to be refueled will depend on what type of tank you have. Some commercial generators are supplied with a 24-hour fuel tank, although 48-72 hour fuel tanks are also available.

Additionally, unless your business or commercial space deals with food that could spoil, it’s recommended that you turn your generator off during non-business hours so that the engine can cool. This is particularly helpful during long power outages as it helps your system avoid unnecessary wear and tear.

Kenneth Crawford is a South Florida based interior designer and owner of Kenneth Crawford Interiors.  As the August Designer of the Month, he offers some professional lighting and decorative ideas.

Each element in a well-decorated room from paint color to the detail of each doorknob is important, and the right lighting is key to unlocking the true potential in your design. The space must be orchestrated perfectly, creating a cohesive flow through out.

I have over 20 years of experience with commercial and residential design, and whether you are building a new restaurant or renovating a 500 sq. foot dining room, the lighting fixtures themselves and the angle of illumination make a world of difference. That’s why I shop Capitol Lighting’s extensive database to find everything I need from unique ceiling pendants and elegant crystal chandeliers to simple bath vanity fixtures and top quality light bulbs.

The examples featured below show how the right lighting will create a custom finish and bring out the best in your decorative scheme:

Dining Room

When designing an interior space, you must look at the room as a whole. Light fixtures should blend harmoniously with the decor, adding color, texture and style to complete the design. The Philippe Stark fixture, purchased from Capitol Lighting, is more like a sculpture, making a stunning design statement and blending with the architecture without obstructing the view or overpowering the space.

Guest Bedroom

These nightstand lamps purchased from Capitol Lighting add the perfect finishing touch to this room. I wanted a metallic element to pull the silver embedded in the artwork and create a sparkling effect reminiscent of the Intercoastal on a clear day. 

Powder Bathroom

The Italian glass sconces were selected for their linear design, which adds to the architectural composition of the room.

Bedroom

Home maintenance can be overwhelming, especially when you don’t know where to start. Roofs that need re-shingling, carpets that have seen better days, that occasional leak you still have yet to place… there’s usually always something that needs fixing. Problems that are visible are usually easy to track and stop before the problem gets worse, but what if there’s an issue inside your walls?Outdated wiring is an issue all homeowners will eventually face. Homes that are at least 30 years old are likely to have outdated wiring not designed to operate with the modern homeowner’s lifestyle. Older homes with 60 amps can’t handle powering multiple appliances at once, not when the typical homeowner needs a house with at least 100 amps. It’s important to note that old wiring isn’t just an issue of inconvenience, but safety.

The jargon in the lighting world can often get mixed up. Color rending index (CRI) and color temperature are one of the most to be confused with each other. This post is going to clarify what the different between CRI and Color Temperature is so we can end this confusion.

Here is a short explanation why the CRI is more important to focus on before deciding for a color temperature. The color rendering index is the most important feature in certain applications as it determines the appearance of objects, faces and spaces. If this aspect is not relevant, the CRI can be as low as 60 or even 40.

The color rendering index (CRI) is a numeric evaluation of the light color accuracy with the reference of daylight (numbered 100). Sunlight and its broad spectrum will enable a person with normal vision to see 68 different colors in a color chart, but if the chart is illuminated by a light source of one wavelength only, each color from the color chart will appear as a different brightness of that one color. Some activities, such as walking or operating a vehicle, do not require the accurate perception of surface colors while others such as product selections in shops benefit from better color rendering features. Look at the application of the lighting installation. If the visual tasks are easy to perform the CRI doesn’t need to be high. In areas like offices, handcraft manufacturing and surgery, the requirements for visibility, contrast, visual guidance as well as face recognition need to be provided by a lighting system with a good CRI of >80 or even >90.

How much is the light color affecting the space? The term color temperature describes the temperature of objects by which they emit light, modeled through the “blackbody radiator”. When increasing the temperature of a “blackbody”, it starts to emit visible light in a continuous spectrum. The filament of a 60W incandescent lamp heats up to about 3000°F, as a result the lamp emits light with a color temperature of 3000K. Many of our artificial light sources do not create light by heating up a material until it glows like an incandescent lamps. Instead of creating a continuous spectrum, they generate an assortment of color emission lines. A blackbody color temperature cannot be directly given to this non-blackbody type of emission, generated by high intensity discharge and fluorescent lamps for example. For those light sources, a correlated color temperature (CCT) is indicated, based on the blackbody color temperature. A cool white fluorescent lamp has a CCT of about 5000K. The lamps light spectrum is different from a blackbody one but has the same temperature.

The light color influences the atmosphere in a space. The more cozy the ambiance the warmer the light color (lower color temperature) should be and the more dynamic the scene the cooler the light source (higher color temperature). The CRI is the most important factor to watch when choosing light sources. How good is the light source representing faces, colors and contrasts? The easier the visual task and perception the lower the CRI can be. The color temperature needs to be watched second, it is supporting the space’s atmosphere.

Conclusion

There you have it; an explanation of both the Color Rending Index and Color Temperature.

Have anymore questions or thoughts? Comment them down below!