relatively high ceilings. Drive by any industrial park, warehouse, or factory, and walk inside and what you will see is a high bay light.

But walk into any factory or warehouse and you will see different styles and options, wattage’s and configurations. Traditional high bay fixtures that were once common place were Mercury Vapor, which were then replaced with High Pressure Sodium and Metal Halide bulbs. As new technologies were introduced, and old technologies became more common, the old HID bulbs were replaced with Induction and Fluorescent light sources. And more recently with the more wide spread approval and popularity of LED, we started to see conversions from these older technologies to the latest energy saving LED High Bays.

A High Bay Fixture, depending on the light source, can take on many forms and shapes. If you consider a Metal Halide or High Pressure Sodium fixture, they typically consist of a large heat sink block at the top of the fixture that typically houses the fixtures ballast. Below is an aluminum or acrylic dome and at the top of the dome is the HID bulb. These bulbs typically come in two wattage’s, 400 and 1000. 400 Watt Fixtures tend to be installed in ceiling heights no higher than 30 feet, 1000 watt fixtures are typically 40 feet or higher. Interestingly enough, spacing of lights is similar to the height they are located off the floor. A fixture installed at 20 feet from the floor is installed in a 20X20 pattern, 30 feet in a 30X30 pattern, 40 feet in a 40X40 pattern. Of the 3 type of HID bulbs, Metal Halide tends to be the best option. High Pressure Sodium Bulbs are very low on the temperature color and have the warehouse aisles have the ability to focus the light where it is needed. A light designed for a warehouse aisle is a lot different than a light designed for a gymnasium or a factory floor. In these spaces, a light that can flood the area evenly is important, in a warehouse aisle, a light that can light up the face of the shelves and the floor below is important. And when selecting energy efficient options, its just as important to understand the technology and what it is capable of doing. Adding controls to a T5 fluorescent fixture is a good idea only if the ballast is designed to handle that requirement and not lower the life expectancy of the bulbs. Motions sensors and daylight controls that dim the light output based on occupants and the amount of daylight available in the space. Technologies such as metal halide and high pressure sodium are not a good choice as these technologies are not good at dimming or turn on or off quickly. Fluorescent can dim, but you need special ballasts for them. So knowing what you want to do and may want to do is important at time of purchase, because not having the proper equipment or options could mean a costly lighting warehouses, factories, gyms and readily available through the utility companies, and mass adoption means the technology of LED had matured to the point where the questions and disbelief of past years have gone away.

For the average homeowner, electrical panels are not very well understood. Since the job of an electrical panel is to deliver electricity, the common assumption is that if you need more electricity to support your household, you should just be able to add more circuits. This is incorrect, though.

This is only part of your electrical panel’s job. It also acts as a safety device, channeling the electrical flow into circuits so your home gets the amount of electricity that’s allowed by the panel. If your home doesn’t have enough electricity, then it’s time to upgrade your electrical panel, but how do you know when this time has come?

Have you noticed any lights in your home that flicker, dim, or brown out when you turn on major appliances such as your dishwasher or microwave? This is a sign that the draw on your system is too strong, and that you would benefit from adding more amps to your electrical box.

If you have multiple circuit breakers that trip on a regular basis, this is probably a sign that you don’t have enough power coming into your home. If you’re constantly flipping circuit breakers back on in your electrical panel, you could very well need an upgrade.

This is actually an outdated method of managing the electricity in your home. In fact, it can be downright dangerous. Many homeowner’s insurance companies won’t even insure homes that still have fuse boxes instead of an electrical panel. Fuses simply can’t provide the amount of power that the average home needs. The best thing you can do is upgrade your fuse box to a standard electrical panel as soon as possible.

The electrical system of a home is often a greatly underrated, underappreciated, and under cared for part of any home. As long as it’s working, why worry? However, your electrical system can very easily cause big problems if it hasn’t been cared for. Buying a home is a big investment, and you shouldn’t leave anything to chance. Depending on what your home inspection says when you get it back, it’s never a bad idea to ask for a licensed electrician to come out and do an electrical system inspection prior to committing to the purchase so that you know exactly what you’re getting. Consider the following reasons you definitely want to ask for an electrical system inspection before committing to a home purchase in Longview.

It’s important to have a circuit breaker panel inspected regularly, including when you’re looking to buy a home. The circuit breaker panel is a critical safety feature for any home electrical system. Your electrician will check to make sure it’s in working order, that there are no recalls on it, and that there is plenty of power in order to power all the appliances and more. Making sure this critical element of the home is working properly is the most important part of an electrical system inspection.

When you have an electrical inspection completed on a prospective home to buy, you’ll get a good sense of what the current state of the electrical system looks like. This will give you a good idea if you will have to invest in the electrical system in the future and when that may need to happen.

Your electrician can help you figure out if you’re making a good investment from that side of the home buying experience. Electrical problems can quickly add up to large sums of money if you end up having to replace much of the wiring, outlets, and lighting fixtures in order to improve the house and reduce any chance of an electrical fire. Understanding what the electrical risks are will help you know if the house will be worth the money or not.

Often times, when you buy an older home, you may be considering adding a dishwasher, upgrading the washer and dryer, or opting to either add or upgrade the air conditioning system. These are all great ideas to add value to your home, however, an upgrade can quickly turn into a much larger project when you need to install a new electric panel or upgrade the wiring because it can’t currently support your home improvement projects.