Are you living in a home that was built before 1950? If so, you may have a potential fire hazard on your hands that you cannot see. Wiring in older homes is often an antiquated system know as insulated cloth wiring. While it may be perfectly safe in some houses, it can lead to problems down the road. If you are not sure if you have cloth wiring, you will want to call an electrician. Los Angeles homeowners can rely on The Electric Connection to provide prompt service.

An electrical safety inspection will determine whether your home has cloth wiring and whether or not it should be replaced. If you are noticing problems with the power in your home, like lights flickering, outlets not working and etc…it may be an indication the protective cloth around the wires is fraying. Overtime, the cloth becomes brittle and decays. This ends up leaving bare wires that can certainly become a major risk.

Your electrician in Los Angeles will be able to advise you the best course of action to take. If you are planning to do any remodeling or upgrading light fixtures, it is highly recommended you replace the old wiring in your home. During the inspection, the electrician can also check for the old knob-and-tube wiring. This is more common in homes built before 1935. This type of wiring involved the use of ceramic tubes and knobs. It is not safe and is not allowed in new construction anymore.

If you suspect your older home may have either one of these types of wiring, it is certainly better to be safe than sorry. Home fires started by faulty wiring are a preventable tragedy. The professionals at The Electric Connection are ready to help you make this big decision. Give us a call today to schedule your inspection.

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.

Custom Electrical Services was voted by the community as USA Today Best Electrician in Des Moines metro.  We cannot thank our customers enough for taking the time to vote for us!  Winners were announced and presented by the Des Moines Register and the Des Moines Datebook.  Custom Electrical Services was also voted #1 for Urbandale and Johnston by the community.  Thank you Des Moines, Urbandale, and Johnston!

[Estimated read time: 5 minutes]

With the rising temperatures comes the inevitable rise in energy bills. To keep your home as energy efficient as possible, we’ll be going room by room explaining just how you can save money while keeping your home cool.

Starting with the living room, there are a few simple steps you can take to bring energy savings and make it as energy efficient as possible.

What is Energy Star? Energy Star is a program that offers energy efficient consumer products. Energy efficient appliances with the Energy Star logo typically use around 25% less power than conventional models.

Energy Star products are the way to go if you wish to use less power while also saving big on your energy bill.

As we mentioned in our guide for different types of lightbulbs, there are many options available today which offer different brightness (known as lumens) and use less energy.

By far the best options for lighting your living room are LED light bulbs. These types of light bulbs are energy saving and emit LED lights, which reduce energy consumption considerably.

LEDs might have a higher upfront cost, but they offer an energy saving edge, reducing energy consumption up to 80%.

Power strips are a clean alternative to overfilling your outlets. By conveniently switching off multiple appliances at once, you have complete control over how what appliances get energy.

Traditional power strips are simple: you connect the devices and turn off a switch when not using them. Newer versions called advanced power strips feature a variety of other features that might benefit you.

Advanced power strips are designed for areas where many electronics are plugged in, such as entertainment centers or home offices and provide greater control over energy usage through built-in features.

There are multiple types available right now including:

Some power strips also feature a surge protector which not only give you complete control over your appliances but also protects them from damage during thunderstorms or power surges.

While power strips might be of great help to any home, the main culprit for those extra costs are energy vampire appliances, or appliances that use energy while on stand-by.

Appliances like these could end up costing more than $200 per year for the average home.

Vampire energy loss, also known as vampire load, vampire power, or vampire draw is a simple term to explain the use of electricity by appliances that are in standby or switched off.

While most appliances might indicate that they are turned off, they might still be drawing power. The end result is unneeded power being wasted as appliances lay unused.

Video game consoles such as the Playstation 4 and Xbox One are notable for their high energy demand and could result in up to $40 in costs during standby.

Computers, including laptops, are also some of the biggest energy vampires, costing up to $30 if left plugged in while not in use. Laptops might need less power, but leaving them plugged in could result in yearly costs up to $15 when not in use.

To easily reduce these costs, safely group as many of these appliances into a power strip. By easily switching off the power strip when not in use, you will be much more in control of how much energy they use.

Televisions are the kings of power consumption, with 5 hours of daily use costing up to $160 per year while in standby mode as well as with daily use.

Plasma TVs are notorious for their usage of energy. Instead, opt for LCD screens which will reduce the amount of energy you draw. Also, change your TV’s settings to dial back on energy consumption.

Most TVs have a store demo option selected for the picture which ups the brightness and results in a high energy usage. This translates to higher energy bills and more heat. By using the power-saver mode, you decrease the amount of energy used.

If you have multiple appliances connected to the TV, turn them off when not in use. TV manufacturers of today have reduced the usage of standby power, but connected appliances might draw more energy.

These could include DVRs, Blu-ray or DVD players, as well as streaming devices such as Roku, Apple TV, and more. While useful, they might be putting a dent into your energy bill and end up costing more with time.

Window shades, blinds, and curtains are more than just useful for decorating your living room. Dark curtains block sunlight from entering and can be closed during the day to reduce the amount of sunlight that enters, thereby reducing cooling costs.

Blinds are as useful and can reduce heat gain by up to 45% but offer the benefit of being able to be adjusted manually.

Making your living room as energy efficient as possible might seem like a daunting task. By following the above tips and ensuring that you use only the most important appliances, you will be well on your way to ensuring your home is ready for summer.

From LED Lighting installation, to ceiling fan room installation, Bryant Electric Service can help your living room be the highlight of your home.