Businesses as we all know, are always thinking about the bottom line. From ways to increase revenues to ways to decrease expenses, it’s all critical stuff for any company to pay attention to.

That’s exactly why we are creating this post on energy saving tips for businesses and companies alike. And while not every business in every building will be able to implement every single tip on this list, there should be numerous ones that will be highly relevant to your business.

Saving energy will allow you to reduce overhead expenses, enhance your public view as a “going green” company (which you could use as a marketing play), or even just have better piece of mind knowing your buildings are just that much greener.

Without further ado, here is the first on the list (out of 25)…

1. Upgrade to a LED lighting system. The benefits of LED technology far surpass any other lighting technology commonly used in buildings or fluorescent, metal halide, HPS, etc). reducing the amount of energy that is going to power those lights as well.

4. Install sky lights. How about all of that natural light that is going to waste otherwise? By installing sky lights in areas where natural lighting would otherwise not get to (e.g hallways and inner rooms), you open yourself up to some huge savings by not having to have nearly as many lights on during the daytime.

5. Switch to green web hosting. This is a huge one for those companies who have lots of traffic and do a lot of business through their website. spam email has a carbon footprint? Although this won’t save your company any money, it will definitely reduce the carbon footprint associated with your company.

14. Only purchase ENERGY STAR equipment. By purchasing office equipment that is ENERGY STAR qualified, you are buying into products that are proven to be more energy efficient than those that aren’t.

15. Switch over to laptops. Desktops are always plugged in, and that can mean a lot of energy consumption. By switching to laptops, you will use 1/4th the energy associated with powering your computers.

16. Update your insulation. Those nasty drafts aren’t only uncomfortable to your employees and / or visitors, but they are also wasting a lot of energy. If you can, consider updating your insulation to stop the escape of that warm (or cold) air you are paying to output.

17. Update your windows. While you are at it, updating your windows to ones that don’t have any leaks in them will stop those drafts too. Both of these go hand in hand, and together will reduce a lot of temperature control going to waste.

18. Hold a virtual meeting. If you have days designated for meetings and not much else, then why power your entire building (and make everyone drive) if you could easily have everyone stay at home? Your employees will probably appreciate it, and you are going to save a lot of energy for that day. Technology these days makes it a whole lot easier to save on energy for business and buildings alike.

19. Take advantage of tax credits. All of this effort on saving energy will not only save you in overhead costs, but it could also phantom load is basically energy that is being consumed through a product that is entirely off. The simple solution is to unplug everything when it is not in use. Alternatively, you could shut off the power to an entire room or area when it’s not in use to ensure no phantom load waste is occurring.

23. Reduce hot water usage. By installing efficient faucets, you will reduce the amount of water that is wasted. And if you do heat that water, reducing the waste of it will reduce the amount of energy you use to heat that water.

Large factories, refineries, and oil facilities are all industries that require special considerations for their electrical wiring. Heavy-duty applications and hazardous environments must use products built to resist corrosion. Chemicals, rain, snow, wind and other threats damage industrial wiring. As a result, good maintenance and repairs are imperative.

With a properly installed tray system, the next step includes teck cable. This armored cable with an exterior jacket, comes in nearly any combination of conductor sizes, voltages, and cores. Fiber optic, CAT6, and shielded twisted pair cables are available. These are usually color-coded based on their type. Teck cables can be pulled through cable tray, conduits, or buried underground. For buried cable, ensure that it is placed at the appropriate depth, protected by layers of sand, spaced properly, and that buried cable warning tape is conspicuous.

Some clients request protection for buried cables; therefore bricks, concrete slabs, or planks of wood are utilized. Where cables emerge from the ground, they should be protected by a PVC conduit sleeve. Teck cables must be secured to the rungs of the tray using approved Ty-wraps or cable clamps. This not only keeps cables neatly arranged, but reduces the chances of damage.

Once a teck cable has been fed to its destination, it is connected by use of a teck connector. These connectors serve two purposes. The threaded end puts tension on the cable by means of a rubber gasket, which holds the cable securely in place. In addition, a small metal star-ring inside the connector makes contact with the metal armor of the cable, bonding it to the connector. This is why, when preparing a cable for the connector, that 3-4 rings of cable armor are left exposed.

In locations with potentially hazardous or explosive gasses, explosion proof connectors must be used. They have a small internal chamber meant to hold an epoxy sealing compound. This seal contains an explosion in the event of a failure. In addition, it prevents gasses from traveling through the small gaps between wires to potentially non-hazardous locations where arcs and sparks cause harm.

Good working knowledge of industrial wiring applications is essential to ensure safe and reliable installation. Finally, with the use of heavy-duty materials, a facility can expect many years of problem-free service.

This Father’s Day, get out of the tie and money clip routine with 15 bright gift ideas that shine a light on Dad’s favorite past times. Is your dad a grill master, an adventurer, an artist or a hardcore movie buff? Or is he one of those guys that has his own personal style that can’t be nailed down to just one? Whatever the case, chances are good that we’ve got a lighting gift to match his style:

It’s 2013, and if you’re still spending a ton on your energy bill, you should know that it doesn’t have to be that way. Right now, about 20% of the energy we consume goes to lighting. But, with a few energy-efficient changes, we can see that number (and the numbers on our monthly bills) dwindle. This post is the first in a series on how to make the lighting in your home or business more energy-efficient. 

Everyone’s got to eat, and for many of us, the kitchen is the very heart of the home. The kitchen also requires excellent lighting for cooking and cleaning up. So, I figure it will be a good place to start an energy-efficient lighting makeover.

Hydroelectric power is a technology which produces electricity via hydropower, or the energy released by moving water, such as for instance water moving through the course of a river or falling downhill. In the United States today, most hydroelectric power is generated by water flowing downhill, and most of this downhill flow is achieved via the construction of artificial dams. The dams are constructed so as to engender sufficient water outflow volume by way of creating a significant “head” or, that is, the difference in height between the water’s source (or crest) and the water’s outflow.

A significant enough “head” is necessary to produce a sufficiently useful flow of energy from the hydroelectric power source. This is why dams constructed for the purpose of creating hydroelectric power are built as high as is feasible. Within these dams there are turbines which receive the force of the water’s flow, and the turning of the blades of the turbines generates the electrical current which is transferred to long-distance power lines and transformed into electricity for use in homes and offices.

In addition to the dams there are some tidal harnesses which have been constructed. These draw electrical power from the flow of the tide along a coastal area. In the United States, there is a heightened interest in creating many more small, unobtrusive tidal flow hydroelectric power generators in rivers and large streams which would be used just for generating local electricity. In Canada, there is so much electricity generated by hydroelectric facilities that they simply say “hydro” to refer to any public electricity utility, even nuclear power. Norway and Iceland also generate nearly all of their citizens’ needed electricity by way of hydroelectric power.

North America has the greatest hydroelectric power capacity. Canada is the world’s leading nation in that regard, and the United States is the world’s second leading nation.

Except in nations that have a proportionate abundance of the right natural resources (i.e. a lot of water), hydroelectric power is used to handle the supplying of electricity during high peak loads. Today’s greatest single interest in harnessing more hydroelectric power resides in the fact that it is a renewable source, or “alternative source”, of electricity, since obviously the planet will never run out of water and it doesn’t matter if the water utilized is potable or not.

The big concern about using more hydroelectric power is that it may disrupt ecosystems too much if more facilities (especially dams) are installed. A secondary concern is that water demand for hydroelectric facilities sometimes conflicts with irrigation demands.

The Greeks were using hydroelectric power to turn water-wheels for the grinding of grain over 2,000 years ago. Hydroelectric power was “rediscovered” in the 18th century in the U.S. and western Europe.

The first modern hydroelectric dam was completed in 1882 on the Fox River in Appleton, Wisconsin in the United States and could generate 12.5 kW of electrical power. It was based upon the ideas of American inventor Lester Allan Pelton, who invented a jet-free water turbine in 1880.