The outdoor spaces on your property become the perfect spots to spend leisurely moments with your family and entertain friends. In fact, if these areas are planned and installed well, they become an extension of your home. Well-designed spaces allow you to use these areas comfortably during the daytime; however, the only way you would be able to use them optimally after dark, is if you get the right kind of outdoor lighting fixtures installed in your landscaping.

Many homeowners feel that installing a few floodlights in different spots on the property is sufficient in terms of outdoor lighting. However, this kind of illumination is never enough. In fact, there are times when floodlights can mar the beauty of your home and its immediate surroundings; they may end up highlighting some of the unflattering features of your property as well.

The one way to overcome this problem is to hire the services of expert outdoor lighting electricians to handle the job for you. They will understand what your specific requirements and preferences are and will survey the outdoor areas on your property. They will also identify which features you want to highlight and which you prefer to keep in the background. Once they have all this information, they will provide outdoor lighting options and quotes.

A good and knowledgeable electrician will always focus on providing low-maintenance, energy-efficient and cost-effective landscape lighting solutions. While outdoor lighting jobs are typically a part and parcel of landscaping jobs, many homeowners feel the need to upgrade their existing lighting installations to modern energy-efficient LED lights.

Since there are a number of technicalities and aspects that have to be taken into consideration while planning outdoor lighting, it’s important that you consult an expert outdoor electrician who will provide you all the information you need; this helps you make a more well-informed decision.

It’s also a good idea to opt for outdoor lighting maintenance plans. As part of these plans the electricians will come over to your property and inspect all the outdoor lighting installations and fixtures. They will check whether there is any wear & tear in the electrical wiring insulation, the grounding and all the fixtures too.

Regardless of how you look at it, the right kind of outdoor illumination provides a number of benefits. It enhances the security aspect of your property AND adds to its aesthetics. When you have a well-lit garden and yard, you are more encouraged to use these spaces and this increases your return on investment.

For more information, simply speak with the experts at AllRound Electrical and take their advice on various aspects of electrical installations in your home. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck. With RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. They’re great for parties or late-night swims and can be easily installed. We’ve included installation instructions for our waterproof LED strip lights. Some cities require above-ground pool lighting to meet National Electrical Code (NEC) Article 680 standards, which would limit possible pool lighting installation locations. Before you purchase LED pool lights, check your city’s code requirements. We also recommend that you have a certified electrician install your lights.

1) Before ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to find its circumference; this number indicates the total length of strip that you will need. The 21-foot pool used for these installation instructions has a circumference of 65.94 feet and requires 4 runs of 16-foot LED strips.

You will also need to measure the distance between where your power supply will be and both sides of your pool where the amplifiers will be installed (see the setup and wiring illustration below). These distances will tell you how much 18-gauge wire you’ll need for connecting the amplifiers to power. Make sure to account for the distance of any dips or turns that the wires may take along their paths.

Lastly, measure the approximate distance that will be between your controller and where your strip lights begin. This distance will tell you how much 22-gauge wire you’ll need for connecting the controller to your strips. You will also need two small sections of this wire for connecting your first and second strip lights to the amplifiers.

2) Before you’re ready to install your LED strip lights, be sure to drain your pool. Begin by creating or locating a dry area away from your pool for the power supply. The power supply should be contained in a weatherproof box. Power supplies should be installed between a ground fault circuit interrupter (GFCI) protected circuit and the pool’s junction box. It’s crucial to use a GFCI protected circuit as it shuts off if current flows where it’s not supposed to.

Wire the included plug to the power supply, but do not connect to power until the installation is complete.

3) Connect your RGB LED controller to the power supply. Cut the barrel off of the controller wiring. Strip back the remaining wires, and connect its wires to the power supply.

4) Cut the LC2 connector off of the remaining end of the controller, and strip back the wires. Run 22-gauge four-conductor wire to connect the controller to your low-voltage pool lights; use dolphin connectors to join like-colored wires. Connect your first two LED strip lights to the controller by joining each set of like-colored wire with a dolphin connector. You should be connecting four wires of each color (red, blue, green, and black) together. For added protection, cover all wire connections in this installation with electrical tape.

5) You will apply strip 1 clockwise around your pool rim and strip 2 counterclockwise. If you have a flat surface, use mounting clips to secure the strips in place as you go. If you want to mount the strips under your pool rim, drill small holes in the trusses approximately every 2 feet. Use cable ties to anchor the strip to the truss. You can also use speed nuts or cotter pins for strip anchoring to avoid drilling holes.

Solder a small section of 22-gauge four-conductor wire onto the strip’s end terminals. To reseal the LED pool light strip, slide wires through the holes of a 10-mm end cap, fill the cap with silicone, and slide it into place on the end of the strip. Be sure to cover all of the exposed conductive traces to ensure water resistance. Allow a minimum of two to three hours for the sealant to cure.

7) Once the new end wires are attached to the strip, you will mount the amplifier. Use the double-sided 3M foam pad to mount the amplifier in the middle of strip 1 and strip 3. For best results and added security, apply 3M adhesion promoter to the amplifier and its installation location on the pool wall.

8) Using a dolphin connector, join each like-colored wire on strip 1 to the same color on one end of the amplifier. Do the same when connecting strip 3 to the other side of the amplifier. You should be connecting three wires in each color (red, blue, and green) together on each side of the amplifier. The black strip wire will be joined with white amplifier wire. Note that the separate group of just black and red wires are meant to be connected to the power supply. Follow the same instructions for connecting strips 2 and 4 to the amplifier on the other side of the pool.

9) Use 18-gauge wire and dolphin connectors to connect the amplifiers to your power supply.

10) Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.

For more LED pool lighting options, see our entire selection of waterproof color-changing LED strip lights.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.