With all of the information circulating around about renewable energy sources, it can be hard to keep everything straight. One of the most common sources of renewable energy actually comes from the sun, and is harvested with solar panels. The most common solar panel converts raw sunlight into electricity through the use of photovoltaic cells. These solar panels can be found in fields dedicated to their use. One of the most attractive things about solar panels, however, is that they can be installed directly onto your home by an electrician in Pasadena CA. This is becoming more and more common, as people are looking for ways to be more environmentally friendly, self-sustainable and reduce their monthly electric bills.

Installing and Using Solar Panels

There are two different ways to connect solar panels to your home. You can either connect them to a battery array that will store the power for you, or hook them directly into the existing electrical grid. Both methods have their pros and cons, which you can discuss with an electrician Pasadena, such as The Electric Connection.

One of the great things about having your own energy storage array is that you have reserve power if there is an outage. An electrician Pasadena CA who specializes in solar panel upgrades will place a panel in the optimal position on their home. They will then connect the panel to a voltage controller, which helps to control the flow of electricity into the batteries. The battery array is then plugged into a power inverter that converts the electricity from DC current to AC current, so that it can be used in your home. This type of installation is typically used to power just a handful of essential appliances, lights etc. In the case of a power outage, you will have a few hours of electricity by smartly using the battery array to power your home lighting, and essential electrical circuits.

The method of installation that is the easiest for the end user to understand and use is by hooking the solar panel directly into the main power grid. The Electric Connection, or the electrician in Pasadena that you have assisting you with your installation can actually connect your solar panel up so that it will feed the electricity back to the utilities company, rather than just to your home. This can work in one of two ways. Either you send everything you generate back to the electrical company, or you send anything in excess of what your battery array can handle back to the electric company. In either case, you receive credit for the energy you send, which can in turn lower your electric bills dramatically. This installation is slightly more involved, but only requires a minimal amount of home rewiring and/or electrical panel upgrade.

Regardless of the type of installation that you choose, adding a solar panel to your home is a great investment. Not only will you benefit from the peace of mind that you are using fewer fossil fuels to power your home, but you can even receive credit back for any excess energy that you create. To sweeten the deal, there are many state and national grants and tax credits that have been designed to assist people investing in renewable energy sources. Because of these tax credits, much of the cost of installation will come back to you on your tax returns. In just a few years, the majority of all solar panel installations will pay for themselves. If you are truly looking to increase your energy independence, and are interested in renewable energy sources, contact your Pasadena electrician today to talk about solar power.

Click here to read more.

If you live in the United States, you’re likely well-familiar with our typical wall-socket setup. Your plug has two flat pieces of metal roughly half of an inch wide, with one side sometimes being slightly wider than the other. Your wall socket has two slots that match this, with one side also being slightly larger than the other. However, sometimes there’s a variance: some plugs have a third prong below and between the normal two, and most electrical sockets also have a third hole to match this plug. What’s the difference between these two types of plugs and is one better than the other?

To put it simply, yes, one is better than the other. When it comes to electrical plugs, the old adage “less is more” does not apply—the three-prong plug is far better than a two-prong. To learn why, let’s discuss the difference between the two.

In order for electricity to flow, you must complete a circuit. A circuit essentially is a connection from your power source to the device, and then from the device back to the power source. The line that brings power from the power source to the device is called your “hot wire”, which is most often red and comes off the positive terminal (noted by the large “+” sign). The line that then returns from the device to the terminal, usually a black wire connected to a “-“ sign, is known as the “neutral wire.” A plug must have both of these lines in order to work.

However, the third prong in a three-prong plug is a “ground” plug, which dramatically improves safety. When an unexpected burst of electricity happens, such a short in the device or a surge from your power supply, the ground plug will take that abundance of additional electricity and move it away from the device and down into the ground where it is safe. This prevents your device from being overloaded which can cause overheating, sparking, and fires in addition to ruining it.

Three-prong plugs didn’t become the standard in homes in North America until the late 1960s. If you have a home that was constructed around this time or after, odds are your wall sockets are probably already of the three-prong variety. Two-prong plugs can work with three-prong sockets just fine, and you’ll rarely experience any issues.

However, if you have any old two-prong plugs, you’ll likely need your electrical system updated in order to upgrade to a three-prong setup. Properly installing ground wires can involve several hours of electrical work and even cutting into your walls in order to do so properly, so it’s a rather large undertaking. However, it’s by far the safest and most prudent option.

Another option that doesn’t involve tearing open your walls is to install a ground fault circuit interrupter outlet, otherwise known as a GFCI. These sockets are two-pronged, but feature a miniature circuit breaker that measures the resistance through a plug and mechanically shuts off when the risk of a shock is present. While this can help you avoid being shocked by a faulty device, there is still no ground wire present so your electronics are not protected from a power surge.

We’ve touched a bit on the subject of Do It Yourself solutions in the past. Mostly making mention here or there of when it is, and is not, a good idea. But at Kolb Electric, your safety is always our absolute primary goal. So rather than leave it at a mention, we wanted to take some time to tell you some important points. 

We support all kinds of on-your-own projects. It’s a great way to get a new skill set, or polish one you already have. Plus, nothing beats that feeling of accomplishment you get from creating or building something all on your own. But when it comes to DIY electrical work, we would firmly call it a really bad idea.

It really comes down to one major point: harm. It is entirely too easy to cause harm to yourself, to others, or to your personal property. If you follow along with our blog, you may remember a point we made in the article about “What It Takes To Become An Electrician”. In that post, we mentioned that anyone pursuing an education in electrical work pay very close attention to the safety aspects of learning.

This is because electricity, by nature, is highly volatile, and can be hard to predict without training. It only takes one, single misstep and suddenly you, or your home, is on fire. There are plenty of articles out there on how to wire an outlet, or replace a ceiling fan, but please be aware that 1) these articles are rarely comprehensive and 2) reading something and doing it are two very different things.

The U.S. Consumer Product Safety Commission has stated that roughly 400 domestic electrocutions occur every year. And of the estimated 360,900 residential building fires reported, the leading cause is electrical issues and mistakes. We really want to nail home the point that this kind of work takes training and experience to work well. Without these two things, you risk:

Fires that result in catastrophic property loss can even be caused by incorrect bulb wattage, so please keep in mind that something as intense as rewiring should be handled by a trained and certified professional.

Next time you need electrical work, trust in the certified professionals at Kolb to get the job done right! Don’t risk yourself, and your investments on a personal side project. Contact certified electricians today to learn more about our comprehensive electrical services.

There are numerous different ways in which an electrical fire can break out in the home and a number of ways to prevent it as well. Today, you will find there are a large number of electrical system protection devices on the market and this can make it a little difficult to decide which one will work best for your setting.

One effective installation you can use to prevent electrical fires in your home is an custom solutions to residential and commercial clients across Sydney.