Twilight Designs in Las Vegas, flush mount (recessed) step lights are often the fixture of choice when used indoors. He credits this to how easy it is to cut into and run wiring through drywall, especially when installing step lights after construction is completed. “While planning ahead is helpful,” says Bilik, “there are many products available for running wires post-construction.” He recommends 110v wiring to fish through walls and attics or low voltage wiring when 110v is not an option.

For less penetrable surfaces like concrete and stone, surface mounted fixtures are ideal because they mount directly to a wall or flat surface. These step lights commonly have a profile of as little as 3/4-inch up to 3-inches and a trajectory that directs light at the wall or at the surface below.

Regardless of whether you are using a flush or surface mounted step light, you must consider the type of cover (or faceplate) the fixture has. Bilik says that in his experience, most covers will fall in one of three categories, each with its own series of benefits:

One of the easiest ways to dress up your space and update the style is by changing your chandelier. Before you run out the door in search of the perfect chandelier, make sure you know the dimensions of your space. An appropriately sized chandelier should serve as a beautifying focal point that fits seamlessly into your overall design scheme.

For a room without furniture: Add the length and width of your room in feet, and then convert that number to inches. For example, a room that is 12 feet by 14 feet (12 + 14 = 26) would require a chandelier this is approximately 26 inches wide.

For a room with furniture: If you already have a dining room table in the space, the width of your chandelier should be about a foot smaller than the width of your table. This will leave a 6-inch clearance from the outer edge of the chandelier to the table’s edge.

The bottom of your chandelier should rest at least 30-34 inches above the tabletop. Adjust according to personal preference, fixture style and ceiling height. It is okay to hang your chandelier a bit higher in dining rooms with cathedral ceilings.

Chandelier height should be about three inches for each foot of ceiling height, so for a room with a standard 8-foot ceiling (3 x 8 = 24), choose a chandelier with an approximate height of 24 inches.

You may not be aware, but you can have Lower Electric Bills by changing how and when you use electricity during times that the electric company considers “peak demand” or “peak usage” hours.  Electric companies have been initiating peak usage fees for some time now, essentially charging customers more to use electricity when the demand is higher.  This is usually when more people are at home and actively operating appliances, for instance, during a hot summer month when everyone’s air conditioning is running, or around dinner time when TV’s and ovens are working along with the air conditioners. This allows the electric company to make more profit and increase revenues when most people can’t help but use more electricity as a part of their daily life. Luckily, licensed Top Dallas Electrician, ElectricMan Inc. can offer a way to avoid these charges, and Lower Electric Bills by making sure that you are using the least amount of electric company power as possible during peak times.

An Indoor Generator is a unique solution that allows you to store power, either from your power grid when it is cheaper, or utilizing other renewable energy sources, and decide when you want to use it. This highly intelligent equipment allows you to program when and where you get your electricity, providing incredible independence and capabilities for Lower Electric Bills.

Take this as an example.  One local electric company uses a general rule of enforcing peak usage fees between 4pm and 8pm, so programming your system to use power stored during off peak hours at these times will allow you to stop paying these peak usage fees, and only pay the standard rate for electricity during normal usage hours.  This is a far more effective solution, since it is impractical for most home owners to change their schedule and stop using power during these times.

Once you have an Indoor Generator system in place and programmed, the system will automatically switch to your stored power during the times that you have chosen, leaving you worry free about when you are using your electricity!

For more energy saving tips on how to Lower Electric Bills,  information on an Indoor Generator for your home, or any other services provided by Top Dallas Electrician, ElectricMan Inc. visit our website at www.electricmaninc.com, or give us a call at 972-792-7270 to talk about how we can help!