/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Department of Energy. In the summer, keep your thermostat at a minimum of 78°F—no higher. And in the winter, try 68°F.

Most people are actually perfectly comfortable at this temperature—more so than they may think. When elderly relatives or small children live in the home, these settings may not be possible, but they can help most people save money while they are home.

Here is one of the most common misconceptions about heating and air conditioning systems: turning down the temperature all the way will help the home cool off faster, and turning the heat up as high as possible warms a home faster. This simply isn’t the case.

With time, lower temperatures will make the house colder, but it won’t happen any faster. Your air conditioner runs nonstop to reach the setting on the temperature, which is less than what you need to be comfortable. Then, you end up paying way more than you should, and you may not really be comfortable.

The same is true when you continuously get up to adjust the thermostat settings. The AC/heater simply becomes overworked, and this is something you want to avoid. Use your programmable thermostat to keep temperatures stable instead.

When you leave the home, it’s important to use the programming settings on your thermostat to keep temperatures about 10° lower (in the winter) or higher (when it’s hot outside). This way, you don’t waste energy cooling or heating a home that is unoccupied.

However, you don’t want to change the temperature by too much. Let’s say it’s summer and you are away for the day. You shut off the AC completely and turn it on when it gets home. Now, the air conditioner has to work hard to get back up to speed, which may use up even more energy than keeping it at a higher temperature for the day.

Many people are unsure of how to effectively use their thermostats for energy efficiency. Get to know your thermostat by spending some time reading the thermostat. You may be able to use programming options to set different schedules on weekends and weekdays, or to make changes throughout the day.

If your thermostat is over 10 years old, it may be time for a new one. New smart thermostats allow you to set schedules or make changes directly from your smartphone. Ask a local technician about your options.

If you are planning to start working out of home, it’s crucial that you have a designated work space. The best way to create a home office work area that’s productive and functional is to update your home office wiring. Turning that spare bedroom or a new room over the garage or even an extension into a home office is something that you would have to plan well.

Even the simplest of work spaces have some or the other electrical equipment and appliances and you would need appropriate electrical wiring, powerpoints, and circuits and plug points etc. for it. Aside from this, you would require Internet connectivity as well. Most homes have Wi-Fi, and even if all your office equipment like the PC, printers, scanners, phones and tablets are Wi-Fi enabled, it’s best to have a hardwired Ethernet connection in your home office.

That increases the reliability of the service and you won’t be inconvenienced due to an erratic Internet connection. While it may seem like a very simple job, the fact is that installing home office wiring isn’t an easy job and has to be done with care.

As you can see, setting up a home office requires planning and you need to get a good electrician to provide the right electrical system solutions. They will come to your property, survey the space and then provide recommendations and solutions based on discussions they have had with you.

Once you approve the quote, they will then ensure the work is completed on time in the best possible way. They will also ensure that good quality materials are used and that the workmanship is of the best quality.

We at Allround Electricals can provide excellent electrical upgrade and maintenance solutions. We have also handled a large number of home office lighting projects for many of our customers. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263