Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

The best Allen electrician can tell you that chances are, your air conditioning unit is probably going to be the most frequently used electrical appliance in your home this summer.  Making sure that the a/c unit is running efficiently and safely is the best way to save money and prevent costly and dangerous electrical problems. Still, as the best Allen electrician will also tell you, preventing electrical issues can be difficult for someone who doesn’t recognize electrical problems immediately. After all, most of us who are not professionals probably don’t.

Surprise! It’s NOT Your Unit

As the temperatures rise this summer, keeping up with the maintenance of your air conditioning unit is one of the most important things you should do. However, when customers hear about maintaining their a/c unit, they often think in terms of Freon and condensers. The truth is that, although those are clearly important, one aspect that is often overlooked is the electrical part.

It may surprise you to know that calling an air conditioning guy when your unit is on the fritz isn’t always the right thing to do. In fact, any Allen electrician will confirm that, indeed, half the time the problems aren’t with the a/c unit but with the electrical system. If the problems are electrical, they can result in dangerous blowouts and burnouts that could cost you a fortune—or even your home, if a fire were to start. So, with so many things that could go wrong, how can you be sure that the problem calls for an Allen electrician and not an air conditioning repairman?

Air Conditioning Electrical Safety Tips

For instance, did you know that a lot of electrical problems arise when swapping air conditioning units? Something as deceptively simple as trading your current unit for another one, especially if the new unit is larger, can wreak havoc on your electrical system. The amount of wattage required to power the new unit can result in overloading, overheating and damage to the unit as well as to your home’s electrical system. You can burn the lines quickly. Some who think that they have found the solution in splicing their lines to accommodate a newer unit may also be in for a dangerous wake-up call. Splicing lines is never a good idea. When in doubt, call your local electrician. He understands what should be done.

Another thing that your electrician understands that you may not be aware of is that you need him to come out and inspect your circuit breakers regularly to make sure that no wires are melting, no circuits are going bad, and there are no potential fire hazards looming. Because a/c units consume so much power, many times they are wired directly into a circuit breaker. Loose connections in the circuit breaker can cause many problems, including irreparable damage to the electrical system. Be sure to always have an electrician come check your breaker and wiring to be on the safe side.

The electrical work is not limited to the obvious parts of the unit that may need help. The Forced Air Unit (FAU) part of your air conditioning unit is one of the most prone to electrical failures, and yet it is the one part that is often overlooked because it’s located somewhere in a closet, a spare room, or a utility space inside the home. The blower fan inside the FAU often blows out, causing issues with the overall functioning of the unit. Here’s the best way to prevent this: Make sure your electrician does routine maintenance on every part of your air conditioning unit, including the FAU, to prevent blowouts.

Electric Man: Best Allen Electrician

The best Allen electrician makes no bones about the importance of checking your electrical systems when turning on your air conditioning for the sizzling Texas summer, and how much you can save on your summer electricity bill, repair costs and a/c maintenance and repair. As summer heats up, let the team at Electric Man take a look at your unit and help you save money, time and repairs. For more helpful tips, read ElectricMan’s blog or connect with us on any of our social communities. If you have any questions, feel free to call us at 972-792-7270, or use the Contact form on our website!

Although there are many options out there for heating your home, electric heating options have become one of the most popular solutions in many areas of the country. It is generally clean, low-maintenance heating that gives off no soot or fumes associated with combustible heat sources. It is also much less expensive to install in both existing homes and new construction. Once installed, however, electrical heating can be more expensive than gas or other heat sources.

Often in addition to a central heating system, electrical heat sources are placed in homes to provide additional heat to areas that need it. This can by done by any homeowner, and generally requires no help from an electrician unless there’s the need to have additional electrical outlets installed. While this type of heating can be somewhat efficient if used properly, unchecked small heaters can lead to excessive energy usage. To prevent this, you should only use portable heaters if they have a built-in thermostat. You can also find heaters that will turn themselves on and off according to a schedule. These advanced features are more expensive, but can be very convenient.

The various types of electric heaters include:

Storage heaters are fairly large heating units, which are mounted to a wall and must typically be installed by an electrician. These heaters are unique, in that they generate heat during off-peak times so that your electrical bills remain low. They will then release that stored heat during the day. In order for this type of heater to work efficiently, special off-peak meters must be installed and agreements with your utility company must be made. This is one of the cheapest types of electrical heating to have installed, but it can be more expensive than other central heating options.

You can find a variety of fan heaters in nearly every store that you visit during the winter. This relatively cheap, portable solution can provide fast, portable heat to a small area. This makes them ideal for providing additional heat to areas that need it. Convector heaters are bigger than fan heaters, but provide more long lasting, even heat. While they take longer to heat up, they make little to no noise, which makes them much more appealing than heaters with noisy fans. There are many options available, most of which do not require the assistance of a licensed electrician.

Under floor heating is an excellent solution in many ways. If you are building a new home, this may be an especially great option for you. Because it can be very invasive, however, under floor heating is not recommended for pre-existing structures. Heat is generated and distributed through a network of electrical heating cables that are placed under your floors.

Another home or office heating methods that’s gaining popularity today is the electric fireplace. Because they require less maintenance than traditional wood or gas fireplaces, many people are choosing this aesthetically pleasing heating option. These fires provide various levels of heat, as well as a visually pleasing fire effect. Regardless of the electrical heating solution that you choose, make sure that you look into the different options and choose the one that is best suited for your needs. If you have any doubts or questions about the use and installation of an electrical heat source, get in touch with an electrician in Los Angeles, such as The Electric Connection. We are a licensed, bonded and insured Los Angeles electrician. We will be more than happy to discuss the different types of electrical heat sources that are available, as well as what the installation requirements would be.

Click here to visit our website.

Outlets are seemingly innocuous parts of any home. They blend right into the walls and we hardly even know they are there. We often hide them with furniture or décor and never give them a second thought until we need to plug something in or unplug a device. It isn’t like we give them daily inspections or even monthly evaluations. Why would we? They do nothing. Or do they? Those outlets are not always as innocent as they may look. Sometimes, they are extremely dangerous and when you hide them, they can get away with a lot and you won’t know until it is too late. An electrician in Burbank wants you to be wary of those outlets and pay attention to any warn signs that indicate something may not be right. The team at The Electric Connection can give you more detailed information if you need it.

Burning wires have a very distinct, acrid smell. If you ever smell something a little off in the home and it seems like it is coming from a wall, you probably have a serious fire hazard explains a Burbank electrician. Plugging in and unplugging cords over and over puts stress on the tiny wires that give the outlet electricity. They can become loose. They touch each other or the insulation and slowly burn. This is how home fires are started. Other obvious signs of trouble are; *The outlet feels hot or the wall around the outlet feels hot

Don’t ignore your outlets says an electrician. Burbank homeowners need to call The Electric Connection right away if they suspect there is any trouble.

Limit switches, as the name suggests, are precision switches that are designed to work as limiting devices. The switch is typically snap-action and designed to sense the presence, absence, or be triggered by an excess or lack of physical contact at the position where it is installed.

The flexibility and adaptability of limit switches to different tasks and environments has made them very popular as components of conveyor belt systems.

Industrial conveyor belts are considered to be amongst the greatest inventions for boosting production, as well as reducing time, costs and manpower requirements. They are commonly used in production, mining, assembly lines and just about every major industry or sector today.

They typically consist of a number of pulleys that rotate under a continuous belt. Some of these pulleys are powered and they drive the belt, keeping any material on top continuously moving towards its destination.

Conveyor belts can be broadly classified into two classes, which are:

These conveyors are used for transporting smaller volumes of material like packaged goods, or lighter materials like boxes.

These are heavy duty conveyor systems which are designed to carry heavier loads or bulky materials, like industrial and agricultural goods.

While conveyor belts can tremendously increase efficiency, they are prone to jamming from over-loading unless the correct safety measures are put in place. Limit switches help prevent this by measuring the height or number of individual products passing through the conveyor system. In case the switch senses an object that may cause an obstruction, it shuts the system down to prevent damage or spillage.

Depending on the environment and purpose, there are a variety of limit switches which can be used in conveyor systems: