Make sure that the voltage of your LED light is compatible with the truck’s operating voltage. For example, you wouldn’t want to use a 6-volt light with a 12-volt system. That bulb will burn out very quickly. Or say you use a 24-volt light on a 12-volt truck—if you get any light output at all, it wouldn’t be near what is possible from that light.

When you’re installing new LED truck lighting, lubricate sockets, terminals, or any associated electrical connections with dialectic grease to seal out moisture and prevent corrosion. Because the grease can dry up, you should check connections periodically. It’s important to keep connections lubricated to maintain the functionality of your light. However, too much grease can interfere with the terminal/socket connection and prevent a light from functioning.

Be sure to know and understand the rules set in place in the light’s warranty. Doing unauthorized repairs or disassembling the light will most likely void its warranty. A driver should also know the correct person to contact about their LED truck lighting in case of light malfunctioning. The point of contact could be the fleet’s parts department, the purchaser, or the company from which the light was purchased.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

During a recent trip down to Washington, DC I stopped by the National Mall to tour the astonishingly energy efficient homes on display as part of the Department of Energy’s Solar Decathalon.  The Solar Decathlon is one of the DOE’s signature programs to promote cutting edge design and green techonology.

As a Top Plano Electrician, I know better than anyone how powerful and useful electricity is. It also makes me more aware of what most people tend to ignore or forget: electricity is dangerous. Electricians are required by law to carry insurance, and for good reasons. Electric current is capable of starting fires and destroying your property and equipment in a matter of moments. The proper safety precautions really can save lives, and there‘s always something we can do to improve home safety.

One of the most important precautions is located in your electrical panel: the circuit breaker. It is designed to keep you from using more electricity than the wiring or receptacle can handle at one time, what we refer to as overcurrent protection. This protects your wiring from taking on too much current, which can cause the coating around your wiring to melt, the leading cause of electrical fires. Circuit breakers serve another purpose as well; not only to protect from surges coming from outside your home, but from potential hazards within it as well. Current flowing through a failed piece of equipment or appliance can cause sparks, which have the potential to start fires or damage other electrical devices. A properly functioning circuit breaker can shut off the power to this device. It’s very important, however, that you use a circuit breaker of the proper size for the circuit to ensure that your wiring is properly protected.

Circuit breakers come in specialty varieties as well; the most important are ground fault circuit breakers (GFCI), for wet locations, and arc fault circuit breakers (AFCI). AFCI’s, in particular, can help prevent some of the most common dangerous situations in your home.

I’ve dealt with plenty of cases where electrical fires have started because people ran an extension cord under the carpet, so that they can power the lamp in the center of the room. Over time, people walking over the cord stretches out the wiring, making it so thin that the current overloads the thinly stretched wire, creating an arc fault; the electricity “jumps” the wire, completing the circuit in a way the cord can’t handle and generating heat that starts a fire. Arc fault circuit breakers prevent this by shutting the circuit down when the arc fault occurs.

So what do you need to know about arc fault circuit breakers? To start with, by code AFCI’s should be installed on any circuit that isn’t protected by a GFCI or directly wired into an appliance. It’s in your best interest to have your safety devices routinely inspected to maintain their optimum performance and capabilities; in particular, your circuit breakers should be inspected at least once a year. The inspection process is quick and relatively inexpensive, and something that simple really can save the lives of you and your family.

We’re excited to announce that we now offer

Multi-panel light systems are designed to add a point of interest and liven up a room. They can be used for numerous applications, including dental office lighting, lobby lighting, hospital lighting, classroom lighting, waiting rooms, conference rooms, basements, and more. A choice of stock cloud images can be split into two-, three-, four-, or six-panel displays depending on the chosen panel size. Custom panels can include any image and number of panels, and they can be arranged in any way.

Each Even-Glow® LED panel light uses perimeter-mounted LEDs with an optical diffuser to emit natural white illumination without visible bulbs or hot spots.

Dimmable and non-dimmable panels are available for custom or static levels of light. Dimmable panels consume just 40 watts of power, and non-dimmable 2-by-4-foot and 2-by-2-foot panels consume 50 or 72 watts respectively—significantly less than fluorescent fixtures. The panels have sturdy white or black aluminum alloy frames. They operate within a 100-277V AC range and are designed to last three times longer than fluorescent troffers.