The terms Journeyman Electrician and Master Electrician are essentially progressions on the level of license to be qualified to carry out electrical work in the United States. The distinction is somewhat akin to that between someone with a Bachelor’s Degree in Accountancy, and a Master’s Degree in Accountancy. Both are qualified to be accountants, but the latter has considerably more training and experience.

Specifically, if you look at the electrical licensing codes for different states then the difference is that whilst aJourneyman Electrician would be expected to have the skill necessary to wire up and install electrical equipment and wiring, a Master Electrician would be expected to be able to take that process one step further and actually be able to both plan out and organize how an electrical installation should take place, as well as being able to supervise otherJourneyman Electricians as they completed the work.

So in large part, the designation comes down to experience and being able to manage other people.

If you hire a Master Electrician then this is likely to be someone with ten years plus of experience, and a work record that has exposed them to a number of different challenging electrical environments. And they will also most likely have supervised other electricians and acted as mentors. Whilst a journeyman electrician may have four or five years’ experience, and whilst they can do most electrical jobs that are thrust their way, they don’t have the same breadth of experience, and may still potentially need to ask for advice in tricky situations that they haven’t come across before.

In such circumstances, it would be a Master Electrician that they would be likely to turn to for advice.

In most states in the United States the distinction between the two grades of electricians is carried out by bracketing them into Class A and B licenses, of which there would usually be both for Journeyman Electricians and Master Electricians.

Class A and Class B Master Electricians

These electricians will generally have had to have met the specific requirements for that individual state, which will normally include passing a written exam, possibly appearing in front of a board to answer questions, as well as meeting certain minimum levels of work experience.

Class A and Class B Journeyman Electricians

Again, certain specific state requirements will have had to have been met and exams passed. A journeyman electrician of either class would be expected to have less experience and skills than a master electrician of either class.

The distinction between the classes in both cases is that a “Class A” license carries no restrictions (within the context of the skills that it is licensing), whilst a “Class B” license does come with some restrictions.

Fun Fact: His obsession with a chandelier led Italian astronomer, mathematician and physicist, Galileo to discover the law of pendulum motion.

While, we cannot guarantee that you will understand the laws of physics, we can guarantee that you will be captivated by the brilliance of a chandelier.

More than ever, we are experimenting with home lighting design to display our individuality, and nothing conveys unique style more than a fabulous chandelier.

Professional lighting consultants at Capitol Lighting can help you to illuminate your sense of style and find the perfect chandelier(s) to complete your decorative interior design.  A few simple laws of lighting and trusting your own good taste will get you there…

Chandelier Application and Design Tips from Capitol Lighting

Outstanding Applications:  From powder rooms to dining rooms, the chandelier enhances the appeal of your home environment. Chosen above all else for their aesthetic rewards, chandeliers also provide needed general ambient illumination.

Power in Proportion: To enjoy the full benefits of a chandelier, you must choose a fixture that is the correct size.  A chandelier that is too big will overpower; one that is too small will look out of place.  Finding the right chandelier size is easy:  Add the length and width of the room in feet, and then convert that number to inches (i.e. a room that is 12 feet by 16 feet would require a chandelier that is approximately 28 inches wide). When in doubt between available chandelier sizes, size up to achieve a more balanced presentation.

Special Considerations for Over Dining Tables:  When hanging a chandelier over a dining table, the total chandelier width should be about a foot smaller than the table width to allow approximately a 6-inch clearance for those seated around the table.

The Long and Short of It:  Over a dining table, the bottom of the chandelier should hang about 30 inches over the tabletop. The height of the fixture should measure about three inches for each foot of ceiling height, so for standard 8 foot ceilings choose a chandelier with an approximate height of 24 inches.

In a one-story foyer or in rooms with standard 8-foot ceilings, a chandelier should hang no less than 7 feet from the floor.  In a two-story foyer or in rooms with higher ceilings, the chandelier should hang approximately 8-10 feet from the floor. If your foyer fixture is to be viewed through a picture window, select a chandelier that will fill this space and center the fixture accordingly.  Note:  A two or three-tiered chandelier works best for rooms with higher ceilings.

Installation Awareness:  Be sure to employ a qualified electrician and follow National Electrical codes when installing fixtures.  It is especially important to consider the proper mounting procedures for hanging a heavier chandelier.  Usually fixtures weighing 50 pounds or more must be secured to the home’s permanent structure.

Maintaining the Glamour:  Keeping your chandelier in pristine condition requires proper cleaning and attention to specific instructions pertaining to certain finishes.  Generally, crystal and glass elements are kept clean with a basic soap and water combination.  Nonabrasive cleansers for most finishes are required.  Drying fixture components completely will help protect their luster.

Best Accessories:  Ceiling medallions, chandelier shades, decorative chain and cord covers may add to the ambience of the chandelier.  These items may be special ordered to give your chandelier a unique flair.

Imperative Additions:  Be sure to use the correct bulbs for your chandelier.  Where you have a choice between frosted or clear, choose the bulb that goes best with the fixtures finish.  Always employ dimmer controls with your chandelier.

Get High and Mighty with a Mini: The mini chandelier has become an increasingly popular lighting fixture around the home due to the versatility of its small size. Many designers are opting for mini chandeliers, rather than pendant or island lights, over long dining room tables and kitchen islands. Mini chandeliers are also gracing powder rooms and master bathrooms, as well as bedside tables.

Accent the Positive:  Although the chandelier should be the main lighting attraction, low-voltage spot lights, a matching torchiere floor lamp, +/or coordinating wall sconces make great designing additions to supplement lighting needs and complete the room’s décor.

The lighting experts at Capitol guarantee that you will captivate guests and enjoy your home to the fullest with the most illuminating fashions in home lighting and accessories.  Capitol Lighting’s lighting consultants can help you find the perfect chandelier for your home and give you tips on hanging a chandelier.

Whenever you have a short circuit, it means that there was an accidental path created in your existing circuit, which generated a connection that was not there before the short occurred. Electricity will always follow the path of least resistance, which means that it will almost always follow this new path, rather than its intended path. This typically results in an abnormally high level of electrical current. The most common type of short is when two bare wires cross, such as when old insulation deteriorates, causing a loose connection which allows two wires to touch.

An electrical short is not something to take lightly. This increased current generates a great amount of heat, which can lead to sparks and fire. One way to identify an electrical short is by hearing a popping sound whenever that particular circuit is turned on. This is the sound of the electricity taking the path along the new connection that it has found, causing the circuit to experience a sudden overload. Smoke, flames and melting fixtures can follow, leading to larger fires and risk of shock in the immediate vicinity.

Another common source of electrical shorts is improper wiring. This can occur if the metal lining of a particular switch or outlet touches one of the wires. An electrician in Burbank must always find and fix shorts caused by damage, such as storm damage.

The most important thing to do whenever you have a short is to address it immediately. Because of the potential severity of this situation, call an electrician right away to have them inspect and fix the problem for you. A short left unrepaired can lead to more extensive damage, resulting in a much higher cost than if you had fixed the problem whenever it was first detected. For more information on electrical troubleshooting and our services, visit our main page (Click Here).