The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

With summer officially here, there’s no ignoring that temperatures are only going to climb. In order to stay as cool as possible during this time of year, then you have to have a great working air conditioning system installed in your home.

However, purchasing a highly efficient air conditioner and having it expertly installed is only just the beginning. Every air conditioner is a mechanical system, which is going to be prone to occasional operational issues. Keep reading to learn what air conditioning issues you want to watch out for this summer.

Have you ever been walking through your home to notice uneven cooling throughout? If you have, then it’s very likely that you need professional air conditioning repair services. As long as your air conditioner is correctly sized for your home and it’s only ever been handled by professionals, then it should be capable of cooling your home evenly. If not, your AC issue could be relative to damaged ductwork or even mechanical problems in the interior of the system.

Short-cycling is a process in which you air conditioner starts up and shuts down too frequently. There are a couple reasons this can occur. The most common reason is typically that the system is too big for the home, so it’s bringing temperature down too rapidly.

Unfortunately, if your AC has always had this problem then the only solution is to replace it with an appropriately sized air conditioner. However if short-cycling is a new problem, then you could have a problem with your capacitor or some other type of electrical problem.

No air conditioner is going to be completely quiet during operation. However, your AC system should never make alarming, very loud noises when running. If you notice clanging, screeching, or grinding noises then you may have a problem with your motor, fan belt, bearings, or even the compressor. No matter what you think the cause may be, it’s best to give our professionals a call so that we can accurately diagnose and resolve the issue.

When I talk to people about LED lights, the response is often the same: “That’s very exciting. LEDs are really cool. But they’re so expensive.” While you can say the prices of LEDs are going down, and you can promise that once you buy an LED it will save loads of energy, this doesn’t change the fact that many LED lights and light fixtures still cost a pretty penny.

But finally, LEDs are becoming less expensive. Today, you can buy a high quality LED A lamp for well under $50, and many kinds of LED fixtures for around that price as well. For today’s blog post, I’ve come up with a list of my 10 favorite LED task lights that cost less than 60 bucks each.  If you’ve never used an LED light fixture before, give one of these a whirl and I’m sure you’ll be pleasantly surprised.

1. The LED Flexible Work Light – $29.90

As a homeowner, you tend to notice electrical issues like flickers, breaker flips and outages. But keeping an eye on your electrical meter is important too! Without the occasional peek, you could find yourself with higher than average bills, or even a completely unexpected shut off.

The certified electricians at Kolb Electric naturally have spent loads of time with electrical meters, and we’ve got plenty of good information to share this week. Follow along to learn about issues that may arise with your meter, what they mean, and whether or not they indicate a faulty electric meter.

Hard to find a problem if you can’t find the meter, right? Electric meters are most commonly located on an outer wall; usually near where your power line runs. In some homes, particularly older ones, the meter might be found in the basement or a utility closet.

If you live in an apartment, the meter is almost always found near your building (or on it) in a cluster. The cluster houses meters for every unit, and all of them should be clearly labelled with the apartment number on them.

Do be aware that the chances of your meter being outright faulty are fairly low. The machines have exceptionally long lifespans, and are built to endure. It’s more likely you have one of many other electrical concerns, however, it is always best to check with a certified professional electrician if you have any questions or problems. While uncommon, a faulty meter is a pretty big issue, and you don’t want to leave it to chance. Just don’t be surprised if the issue turns out to be something else!

Whether you’re worried about your meter, or you’ve got any number of other electrical problems, the experts at Kolb can help! We provide our consumers with only the absolute best, both in service and skill, and we’re confident in our ability to meet your unique needs. Contact Kolb today to learn more!