Love is in the air, which has gotten me to thinking about lighting. (Come to think of it, what time of year doesn’t do that?) If Valentine’s Day always gives you a hankering to pop Gone With the Wind or your favorite rom-com into the DVD player, have you ever thought about what goes into making those romantic films?

Color temperature is one of the first things to note when studying the lighting in a romantic scene. Is it orange? Bluish? White? Most often, warm colors add to an inviting, romantic atmosphere. For example, the warm light in this sunset scene in Titanic draws the audience in, unlike the cold, blue lighting later in  the movie, after things get dire.

2. Brightness (and Shadow)

You can judge the quality of light in a film scene through the hardness or softness of its shadows. Hard quality light has dark shadows with sharp edges, and often feels more raw than soft quality light. Soft lighting, often used in older films, has lighter, diffused shadows and tends to feel more sentimental. If you’ve seen Casablanca, you know what I mean.

Of course, there are always exceptions to these rules.

Cool lighting can still be quite romantic in the right setting. Like in this still from The Notebook:

And with advances in film technology, sharp shadows can also be quite romantic. Case in point, this still from the end of the 2005 version of Pride and Prejudice:

By Clarissa Allison | April 8th, 2016

With the Spring comes cleaning, but a new season of blooming life and fresh, sunny air also seems to bring out the interior designer in many of us. The good news is it does not have to cost an arm and a leg to make improvements to your Spring decor. By simply upgrading a few lighting fixtures in and around your home, you can delight in the newness of Spring and usher in the new season beautifully. Click the pictures below to be directed to the sale products on our list!

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

You only need to type a few words into a search engine to pull up numerous DIY guides for repairing and replacing electrical lighting outlets in your home. Just grab a screwdriver, pliers, and wire cutters and you’re set.

But hold on—do you really know what you’re doing? These DIY guides can be notoriously sketchy, and some depend on you knowing far more about electrical repair than you probably do. Because of the risk of electrical shock and bad wiring that can lead to fires, you should leave the outlet repairs to trained electricians. Outlet shorts and faults are a common cause for household fires (the Electrical Safety Foundation estimates electrical troubles account for 55,000 fires a year), so you should never take such chances.

video in which Kathleen Packard, their Healthcare Market Development Manager, discusses how some innovations in lighting can positively affect the healing process (and save energy and money). Packard describes hospitals as being historically “institutional and very uncomfortable,” and her mission is to educate the public on the “importance of design” to patient health.

intrinsically photosensitive retinal ganglion cell in the human eye, which senses light and regulates the body’s systems, including melatonin levels, which are directly related to sleep. Visa’s Amber Night Light, she says, creates ambient light that won’t disturb the intrinsically photosensitive retinal ganglion cell. This allows nurses to check on patients without disturbing their sleep.

Of course, all this valuable information leads us to the problems solved by Visa Lighting’s healthcare light fixtures. Packard calls special attention to the benefits of using LED fixtures. She reminds us that LEDs are indeed a great option for hospitals because they are energy efficient and therefore save money, reducing the cost of healthcare; they render color well, which is necessary, so that doctors and nurses can accurately assess skin pallor; and, unlike fluorescent lamps, LEDs contain no mercury.