We’re excited to announce that we now offer

Multi-panel light systems are designed to add a point of interest and liven up a room. They can be used for numerous applications, including dental office lighting, lobby lighting, hospital lighting, classroom lighting, waiting rooms, conference rooms, basements, and more. A choice of stock cloud images can be split into two-, three-, four-, or six-panel displays depending on the chosen panel size. Custom panels can include any image and number of panels, and they can be arranged in any way.

Each Even-Glow® LED panel light uses perimeter-mounted LEDs with an optical diffuser to emit natural white illumination without visible bulbs or hot spots.

Dimmable and non-dimmable panels are available for custom or static levels of light. Dimmable panels consume just 40 watts of power, and non-dimmable 2-by-4-foot and 2-by-2-foot panels consume 50 or 72 watts respectively—significantly less than fluorescent fixtures. The panels have sturdy white or black aluminum alloy frames. They operate within a 100-277V AC range and are designed to last three times longer than fluorescent troffers.

Early Christmas morning in Stamford, Connecticut, the fire department rushed to the aid of Madonna Badger’s family as their home was engulfed in flames. The simple act of discarding ashes from the fireplace turned deadly when those ashes were not fully extinguished, sparking the blaze from outside the home. The heartbreaking news that both of Badger’s parents and her three young daughters perished in the fire turned what would normally be a joyous holiday into a time of mourning for friends, family, and community members in Stamford. Our hope, at ElectricMan Inc. is that this sad story will help drive home the message that smoke detectors are the most important safety feature that you can have in your home.

2. In order to open the headlight housing, it must be heated to soften the glue that seals it. Preheat the oven to 270 degrees Fahrenheit, and place the housing in the oven (top rack). Heat the housing for approximately seven minutes. Note that this time will vary by vehicle manufacturer and that you should be careful not to overheat your assembly. Also note that the headlight will be hot when removing it from the oven, so take care not to burn yourself.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

4. LED angel eye installation will vary by headlight. In this instance, we mounted an

5. Place the second layer back in the housing to ensure that everything is aligned the way you would like. This is also a great time to clean the inside housing, as you will not be able to do so once you reseal it. The cleaner you get it the better; smudges and dirt will be more visible when the lights are on.

8. Now it’s time to reseal the headlight housing. Preheat the oven to 270 degrees again, place the layers together, and put the headlight in the oven (with halo rings installed) for seven minutes. Remove the headlight from the oven, and press the layers together firmly as you work around the lens to ensure all of the edges are sealed (this might require gloves, as the headlight will be somewhat hot). Be careful to only press on the edges so as not to warp the lens.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

10. With the headlight housing installed, complete your wiring, and test connections to ensure proper installation. Be sure to tape/heat-shrink any wiring connections that were added, and clean up any loose wiring.