Now is the time to evaluate your outdoor and landscape lighting needs in preparation for the summer season.  Follow our step-by-step landscape lighting design plan and get the job done right.

Learn how to get luxurious landscape lighting effects and make your home shine by Memorial Day 2014…

Step One:  Review the perimeters of your home, including surrounding outdoor property—front yards, back yards, side yards—to see which features you would like to accentuate, such as fountains, sculpture, or flower boxes. Choose a few areas that will stand out and add a luxurious element to your home at night.

Step Two:  Scout out areas where you will need security lighting—leading up to and at all home entryways.  Take note of areas where path lighting, step lighting, and task lighting are needed.

LED strip lighting under steps, railings and benches provides excellent security lighting and may be custom-tailored to your decor. LED light strips are especially suitable for outdoor areas, as they are long-lasting and extremely durable, radiate very little heat, and use up to 80 percent less electricity than standard light sources.

Step Three:  If you have existing outdoor lighting—review your property at night to see where you can upgrade your lighting design.  Check that everything is in working order and adequate illumination is provided at all significant locations.

• Where there are large areas blanketed in darkness, consider installing a floodlight equipped with energy-efficient lamps and lighting controls.

• Equally important is to check for areas that are excessively bright. Overly bright outdoor lighting, including path lighting and patio lighting, creates glare and can actually make it harder to see at night and diminish safety and security.

Your landscape lighting should be soothing and comfortable.  Make sure that  landscape and outdoor fixtures do not cast light into your neighbors’ property.  Keep “light trespass” from invading your own home at night.

Step Four:  If you like to entertain outdoors—see that your property is safely lit for guests—pay attention to elevation levels and unusual dips or risings; boundaries defining rock gardens, Koi ponds, and small shrubs should be clearly visible.  Make sure you have enough ambient illumination for safe navigation, as well as sufficient task lighting for cooking and food preparation.

Step Five:  Lighting techniques, such as shadowing, silhouetting and cross lighting add artistry and depth to your landscape at night.  But do not overdo it.  Depending on the size of your property, select one to three key areas that will expand and complement your overall landscape lighting presentation.

• Conceal lights behind and below a statue or small tree to highlight form and create definition.

• Show off a sculpted garden,  a textured rock wall or a unique architectural feature of your home that will stand out at night.

Light responsibly.  Keep an eye on the safety.  Having top-quality outdoor lighting makes for the best “Neighborhood Watch Program.”

Light conservatively.  The most wonderful aspect of outdoor and landscape lighting is that you only need a few well-chosen light sources to deliver a great deal of illumination and an overall luxuriant feel to your home.  Compared to other home improvement projects, top quality landscape lighting adds substantially to the value of your property.

Light efficiently.  You will save money in the long run, if you invest in automated lighting systems and LED landscape lighting now.  For maintenance-free, durable, long-lasting illumination—buy your LED landscape lighting and automated control systems from a reputable dealer.

Top-quality LED landscape lighting fixture are built to last with finishes guaranteed to withstand harsh weather conditions; many come with life-time product warranties.

Find qualified lighting professionals and electricians.  Professional lighting consultants will help you design your landscape lighting to exact specifications with outdoor fixtures that are UL-listed for outdoor use; electricians, familiar with updated LED lighting systems, should be licensed and aware of current electrical codes and ordinances in your town or city.

Order your fixtures early, set the job up now with energy-efficient security lighting and luxurious landscape illumination to ensure you will be ready for summer holiday celebrations.

THE SEASON’S TOP PICS:

By Clarissa Allison | August 14th, 2015

Look up at the sky tonight in your town. Odds are it will be almost completely devoid of stars. This is the product of light pollution and urbanization. Since human beings are used to dwelling in the sun’s light, we have essentially engineered the dark to surround ourselves with light during nighttime hours.

What exactly is astronomers and the occasional stargazer, uplight causes atmospheric scattering making distant celestial light sources difficult or impossible to see. Uplight often also goes along with two other light quality culprits by producing both glare and light trespass.

Once you’ve accomplished the above tasks, go out and buy yourself a telescope to view the night sky and enjoy its beauty.

Enjoy a tour of the wonderful Lowell Observatory in Flagstaff, Arizona

When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Competition is a wonderful thing. It makes us want to strive to be better, and keeps us working hard.  But competition isn’t perfect; there’s always another option, and you can’t always tell right away what option is the best deal or the highest quality. It is easy to determine the quality when it comes to something inexpensive; if you don’t like a brand of motor oil or breakfast cereal, you can always buy something different next time. But what happens if you pick a bad electrician?  Failing to spot bad electrical contractors, could mean you’ll wind up paying way too much for your service. Paying too much might actually be the best-case scenario; shoddy electrical work done by “electricians” is a safety hazard, and one you might not even know about until it’s too late.

So how do you find quality electricians? As a Dallas electrician myself, I’ve learned over the years how to make sure the electrician you use is knowledgeable and high-quality:

Today, appliance timers are useful to turn on and off many items automatically around the home today. The timers control lights, coffee pots, sprinklers systems, and other small appliances. This can save on power costs, electricity, and water. The timers also make life more convenient for you. Let’s look at the various types of timers you can buy today to provide you with Energy Savings.

Savings

You can well imagine the savings in power, water or money you can have using these timers. Of course, the savings will vary from person to person depending on the habits practiced prior to using the timers.

Cost of Timers

The Appliance Timers range from just under $10 to over $100 depending on their functions. You buy the timer that best suits the job you need it for to get the right Energy Savings, do not buy a wall-mounted timer if you want to control your sprinklers for example. Do your research for the type of timer you need and then make your purchase accordingly.