They are lights that rely on LEDs (a light-emitting diode) as their source of illumination. In a majority of the cases, the lighting stems from either a fluorescent or an incandescent light bulb. LED lights have a good reputation for being a lot more efficient than traditional light bulbs, and they can also be inserted into more traditional lamps and light sources, where they may be utilized as other regular light bulbs.

If you are a consumer in the market for some lights, you should understand that there are a bunch of benefits that the consumer will obtain by choosing these kinds of lights over other sorts of lights available on the market. For one thing, these sorts of lights are known to consume a lot less energy than other kinds of light bulbs, and they are known to be as much as 300 percent more efficient than a CFL or a compact fluorescent light. In addition, LED lights are up to 1000 percent more efficient when compared to an incandescent light bulb. They come with an extremely long life, relatively speaking, which translates to around 50,000 hours of usage at approximately 50 percent of their initial power, according to the Wise Geek website, anyway. If you want to work this out in terms that are more practical and applicable to everyday life, you can think of it in this way: This will equal around 8 hours per day for some 13 years at approximately 70 percent of power. By way of comparison, you should realize that the average 60-watt incandescent light bulb will only last around 1000 hours!

Furthermore, in terms of pure safety, LED lights can’t be beat. Here is an example of that. Consider this: These types of lights come without any toxins such as mercury or other unsafe materials. In addition, they are also known to be free from any emission of ultraviolet or UV heat, thereby failing to attract any insects, which is very much a welcome piece of news to people who are troubled by pesky insects! Further, these sorts of light bulbs fail to produce a lot of heat, meaning they are cool to the touch.

Of course, not everything with these kinds of lights is advantageous. For example, the price tag on LED lights is quite high, and they are known to be heat sensitive. This means that these sorts of lights can either fade or stop working altogether if they are not utilized with either a consistent or a steadfast current. Finally, utilizing them as a part of room lighting may be unbeneficial, too, since they are meant to be utilized more for room lighting situations.

Your smoke detector is arguably the most essential safety fixture in your home. However, a National Fire Protection Association (NFPA) report found that at least 5 million homes in the U.S. still don’t have smoke alarms. According to the NFPA, having a working smoke alarm cuts one’s chances of dying in a reported fire in half. But since most of us are so accustomed to this appliance, it becomes easy to take it for granted and remember how important it is to our security.

Obviously, your smoke alarm’s primary function is to notify you of any suspicious smoke inside your house. This includes anything from burnt cooking, improperly extinguished cigarettes/cigars (actually among one of the most common causes of fire), and electrical fires. Your alarm will sound at the first sign of trouble, hopefully notifying you of the fire before flames can spread to other parts of the house. Likewise, many electrical fires first take shape as a spark followed by smoldering wires. Your alarm will be able to give you some warning before the fire gets out of control, protecting you and your family.

To optimize your safety in the event of a fire, we recommend taking the following steps:

If you need assistance with your smoke alarm or would like to schedule a home electrical safety inspection, contact Bryant Electric Service today. We are one of the most trusted electricians in Austin, TX and are happy to answer your questions!

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

The London Olympics are certainly on the tip of nearly everyone’s tongue (and Courtesy of FrenchArt-Deco.com

This piece, entitled “Swimming Pool” by French artist Albert Decaris won gold in the Engravings and Etchings competition.

In 1949, the International Olympic Committee decided to stop all art competitions, reasoning that it was illogical to let professional artists compete, while only amateur athletes were eligible. Instead, cultural festivals replaced the art competitions, and still do to this day. There’s still a chance for the best of the best artists and entertainers to showcase their stuff on an international stage, and for lighting designers, this is certainly a world class exhibition. 

LED is the light source that’s in it to win it this summer, wowing Olympic fans with spectacular light shows and festive monuments alike.

At the opening ceremony, LEDs were at the center of almost everything. The dove bikes used LEDs to light up their wings as they performed a circuit of the stadium.

LEDs lit the screen showing the Queen’s acting debut, with none other than James Bond.

Even on the sidewalk outside the main Olympic Stadium, there are 20 circular slabs that capture the kinetic energy of pedestrians’ footsteps to light up nearby LED lamps for 30 seconds at a time!

Our hope is for Light Reading to be a place you can come for inspiration and guidance as you plan your next lighting project.

The thing is, we are incredibly inspired by our readers!  Your kind words, and contributions to “11 Beautiful Photos of Under Cabinet Lighting”

11 Beautiful Photos of Under Cabinet Lighting: This one definitely falls under the “inspiration” category, but it can also be helpful if you’re trying to determine what type of under cabinet lighting is your favorite for the kitchen. Puck? Linear? LED? Fluorescent? Be prepared to gaze at dreamy kitchens. “How To Have Great Lighting In a Rental”

Here’s How To Map Out Your Recessed Lights (An Infographic): Those who decide to add recessed lighting to a new or existing home are presented with a seemingly impossible task – laying them out on a blueprint. This infographic will clue you in on what every lighting designer knows about recessed lighting placement. You’ll be ready to install in no time. Read More >>