Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

One of the least understood terms in LED Lighting is efficacy, or in simpler terms, how efficient is the light. It is typically measure in lumens/watt. Today, efficacy is becoming more and more important because efficacy varies greatly from product to product. What the consumer needs to be wary of is that you should not be mislead into thinking that just because you are switching from HID or fluorescent to LED that you are getting the best savings available. You also need to look at how efficient the LED product is to maximize the savings.

Here is an example of how this works. Let’s look at a two USA Made competitors LED Retrofit Kit compared to our 4th generation LED kit. All three units are designed to replace 400W HID

From this table, you can see that all products produce over 13,000 lumens, with the MyLEDLightingGuide product producing the most at 14,528 total lumens. It also consumes the least amount of energy of the three units at 105 watts, compared to 130 and 135 watts. For the record, all three products come with a 10 year warranty on the head and a 5 year warranty on the driver. MyLEDLightingGuide also offers a 10 year warranty on the driver as an optional upgrade.

But what does this all mean in terms of saving you $’s. Let’s take a typical scenario. Let’s say these retrofits are installed in MyLEDLightingGuide 105W retrofit kit. Multiply this number over 10 years and by the number of fixtures you have to replace, and this is real dollars. And let’s not forget the MyLEDLightingGuide retrofit kit is also much brighter than the competitors products.

So efficacy is important. It saves you money. But a well designed kit will also produce more light. Just think, without efficacy we wouldn’t have as great of savings, nor would we have more light production from the same amount of power.

Efficacy is huge in the world of lighting, and it is only going to get better year by year. Technology improves, lights improve, and thus; efficacy improves. In 10 years, lights that will be made are probably going to be 5x improved then they are today. And since they are already super efficient today, just imagine that times 5. Now that is efficacy!

Show off your style and freedom of choice with superb outdoor hanging lanterns and light fixtures from “All American” home lighting and furnishing vendors.

Hanover Lantern, Hubbardton Forge and Northeast Lantern feature outstanding designs manufactured exclusively in the USA and infused with American pride.

HANOVER LANTERN

Hanover Lantern with roots near historic Gettysburg, Pennsylvania brings in the endearing elements of small town USA.  Trusted Old World values live on in their custom made-to-order outdoor lighting compositions.

Hanover Lantern’s commitment to creating an American-made, quality product is highlighted in their cast aluminum outdoor lighting products and accompanied by superb accessories, including mailboxes and address signs. Featured on the finest homes, businesses and resorts throughout the United States and Canada, Hanover Lantern is now a Philips Company.

Philips Company, the largest lighting manufacturer in the world, has put their name behind Hanover Lantern and lives up to their slogan: “Tailor Made to Fit Your Style.”

HUBBARDTON FORGE

Hubbardton Forge Lighting fosters an environment infused with collaborative energy as designers, engineers and craftspeople work side by side free to connect, explore and create.

Housing “The Modern American Blacksmiths,” Hubbardton Forge is the oldest and largest commercial forge in the country with a team of over 200 people creating hand-forged compositions infused with timeless beauty and artistry.

A company that is accessible and always responsive to special design requests and individual decorating requirements, Hubbardton’s strong commitment to outstanding design and the development of energy-efficient lighting solutions is showcased in every piece.

Structural integrity in heavy gauge steel, durable finishes, hand-welded arms and shafts, and premium grade internal components ensure products last for generations.

Pioneers of environmental cleanliness and innovative manufacturing processes, Hubbardton light fixtures are composed of raw steel from a high percentage of recycled materials and a state-of-the-art powder coating finish free of hazardous waste and toxic chemicals associated with liquid finishes.

Resistant to rust and corrosive elements, creative works from Hubbardton Forge Lighting lend splendid illumination to your indoor and outdoor lighting design.

In addition to awe-inspiring outdoor hanging lanterns and light fixture designs, skilled artisans at Hubbardton Forge also create unique home décor items, including mirrors and bathroom accessories.

When you own a Hubbardton Forge pendant, lamp, chandelier or outdoor hanging lantern, you own a piece of Vermont-made art of enduring value.

NORTHEAST LANTERN

Handcrafted light fixture compositions from Northeast Lantern come to light right in the state of New Hampshire.  Light fixture designers and craftsmen are trained by the New Hampshire Department of Environmental Services to present a finished product in a clean and green manner.

From the classic “Colonial” collection to the modernistic “Midtown” collection, light fixture designs from Northeast Lantern represent the enduring spirit of American life.

Enjoy reasonably priced outdoor lighting fixtures made of solid brass and copper from Northeast Lantern.  Northeast Lantern products are custom designed with unique variations in hand-applied natural finishes.  Outdoor hanging lanterns and light fixtures will darken and weather over time; retaining their beauty, they will never rust, peel or chip.

With the exception of glass, Northeast Lantern guarantees all products for life.

Enjoy the best of America; check out new “Boston” and “Concord” collections from Northeast Lantern.

From Generation to Generation, Hanover Lantern, Hubbardton Forge and Northeast Lantern Continue to Provide the Best

Keep your stars and stripes shining true with top quality outdoor hanging lanterns and outdoor light fixture designs.

Celebrate July Fourth Weekend with these American Beauties…

New from Northeast Lantern

The “Independence” outdoor lighting collection.

New from Hubbardton Forge

The “Modern Prairie” collection 36-5710

New from Hanover Lantern

B9976 “Four Sided Series” outdoor hanging lanterns

Visit a Capitol Lighting showroom or shop 1800lighting.com to view the finest in home lighting and accessories.  Celebrate your American pride and enjoy spirited new designs from Hanover Lantern, Hubbardton Forge and Northeast Lantern!