Modern day living is highly reliant on the use of electricity and the different appliances, equipment and fixtures it powers. Industries are even more reliant on electricity and their profitability is closely knit with how seamlessly their systems operate. They rely on electricity to such an extent that they rarely give it a second thought; well, at least not until something goes wrong such as:

Most of these problems can be attributed to poor power factor. Let’s understand a little more about what that is.

Power factor is essentially a measure of how effectively the incoming power is being used by the electrical equipment on your premises. It is expressed in terms of a numerical value in the range of 0-1. A higher power factor indicates that the electrical equipment is being used more effectively.

For instance, if the power factor is 0.8, it indicates that 80% of the power supply to the equipment is being utilised effectively and that 20% is being wasted. Regardless of what this ratio of effective usage Vs wastage is, the latter is an unnecessary expense. Typically, your power factor should be closer to 1; it indicates that your site is using energy in an efficient manner.

A number of businesses are currently being charged a kVA tariff and not a kilowatt tariff. This means, your service provider is probably charging you for the power they supply to you, rather than that you actually use. Simply put, you are paying for power that is being supplied to you, but which is being wasted. If your business has a low power factor, it means you pay even more for this waste. There is another aspect you should keep in view. As mentioned at the start, poor power factor has the potential to cause power drops and power losses; in turn, these lead to motor failure and overheating and failure of other equipment too.

Installation of Power Factor Correction equipment might just help avoid prohibitively expensive infrastructure upgrades; it does this by reducing the current electrical demand on your system & improving the efficiency stability. Based on which tariff you are on, power correction might just prove to be an excellent way for your business to deescalate its electricity costs.

The power factor can be improved by installing Capacitor Banks. These are PFC (Power Factor Correction) equipment and help correct the inefficiencies in the energy supply. Apart from this, they also reduce the peak demand on the power network. This is an effective and cost-effective solution to reduce your power bill as it helps lower the monthly demand and the capacity charges. Generally, the payback periods for PFC are between 1 and 3 years. Taking the life span of the PFC equipment into consideration & the potential savings, this investment can prove to be very worthwhile for you.

If you feel that you are paying too much for electricity, we at Allround Electrical can conduct a survey of the equipment used on your site and map their electrical consumption against the power your plant is using and is being charged for. We will then provide you a report of what your power factor is; and if it is low, how it can be corrected. For more information, call us at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

]]>

Energy Efficient Lighting Solutions for Aging Eyes

As people get older there is more time to really enjoy the homes they have built for themselves. The kids have grown and moved away, and being physically comfortable has, perhaps, become more important than it once was.  Knowing that aging eyes need a better kind of light and more of it to be comfortable, remodeling the lighting in your home improves comfort threefold.

“Baby boomers are finding that they need three to four times as much light and that glare is hard on the eyes,” says Norm Brown, CLC, of Norburn Lighting & Bath Centre in Burnaby, B.C., and a consultant for the American Lighting Association (ALA). “Fluorescent light bulbs are easier to see by than regular light bulbs. LED lights are being used more for their reduced glare, as well as Halogen, for their white light quality. You can choose energy-efficient bulbs in many styles for redecorating your whole house.”

Capitol Lighting offers ceiling, wall-mounted and portable fixtures, and recessed and track lighting in energy efficient compact fluorescent bulbs as well as light-emitting diode (LED) lights to help aging eyes. Shop from thousands of fluorescent lights and energy efficient lighting solutions when remodeling your home’’s lighting at 1800lighting.com today! Aging eyes can see more clearly with energy efficient lighting solutions from Capitol Lighting.

There are many electrical hazards in industrial plants including arc blasts, shock and arc flash. These can result in serious injuries. Accidents involving electricity may sometimes be fatal. Industrial plant environments create potential for these events to occur not only to plant owners, but also to maintenance staff.

Electricians often assume that these hazards do not apply to them. These beliefs often persist until a major incident occurs that results in both financial and personal repercussions, that result in a change in policy within the plant.

Implementing policies that encourage a culture of electrical safety doesn’t have to be reactive. Taking steps to minimize the risks associated with electrical hazards will create a safe working environment for everyone, and not just the maintenance team.

One of the most important aspects of enhancing safety is establishing a routine for the maintenance of electrical equipment in the facility. This is not only vital for optimizing the performance of the equipment, but also ensuring reliability, safety and preventing unnecessary downtime.

There is no way to put a price on one’s safety, or the safety of one’s family. That is why we recommend that homeowners in the area consider the use of a residential alarm system in Newtonville, MA. You shouldn’t be constantly worried about the security of your home being compromised, as that’s no way to live. However, you must also accept that this is not a perfect world, and that threats to home security are a very real possibility. Protecting your home with an alarm system is a great way in which to sleep easier at night. Of course, you may encounter occasional problems.

One of the most common problems that homeowners encounter with their alarm systems is that their codes won’t work when entered. There are a few potential causes of this issue. First of all, stop and ask yourself if someone else may have changed the code without you knowing. A miscommunication may be the cause of the problem. Secondly, it’s possible that your buttons are sticking, perhaps due to excessive wear. If so, you may need a new keypad installed, but you should be able to pry them out enough to at least get into your home first.

If you are headed out for the day, and you notice a low battery indicator on your panel, and wonder if you need to do replace it immediately. Generally speaking, you should have a bit of leeway before the system becomes inoperable. However, it is always best to replace batteries in your system as soon as possible. Be sure to refer to your user’s manual to ensure that you are using the correct batteries, and to understand which controls are hardwired, which recharge, which have backup batteries, etc.

When the “no AC” indicator shows up on your alarm panel, you may be wondering how it can tell that you are not running your air conditioner. This is not what the indicator is referencing, though. Instead, this stands for “no alternating current,” meaning that your system has no electrical current supplying it. You may need to reset a circuit breaker, or there could be a problem with your wiring.