As a Top Plano Electrician, I know better than anyone how powerful and useful electricity is. It also makes me more aware of what most people tend to ignore or forget: electricity is dangerous. Electricians are required by law to carry insurance, and for good reasons. Electric current is capable of starting fires and destroying your property and equipment in a matter of moments. The proper safety precautions really can save lives, and there‘s always something we can do to improve home safety.

One of the most important precautions is located in your electrical panel: the circuit breaker. It is designed to keep you from using more electricity than the wiring or receptacle can handle at one time, what we refer to as overcurrent protection. This protects your wiring from taking on too much current, which can cause the coating around your wiring to melt, the leading cause of electrical fires. Circuit breakers serve another purpose as well; not only to protect from surges coming from outside your home, but from potential hazards within it as well. Current flowing through a failed piece of equipment or appliance can cause sparks, which have the potential to start fires or damage other electrical devices. A properly functioning circuit breaker can shut off the power to this device. It’s very important, however, that you use a circuit breaker of the proper size for the circuit to ensure that your wiring is properly protected.

Circuit breakers come in specialty varieties as well; the most important are ground fault circuit breakers (GFCI), for wet locations, and arc fault circuit breakers (AFCI). AFCI’s, in particular, can help prevent some of the most common dangerous situations in your home.

I’ve dealt with plenty of cases where electrical fires have started because people ran an extension cord under the carpet, so that they can power the lamp in the center of the room. Over time, people walking over the cord stretches out the wiring, making it so thin that the current overloads the thinly stretched wire, creating an arc fault; the electricity “jumps” the wire, completing the circuit in a way the cord can’t handle and generating heat that starts a fire. Arc fault circuit breakers prevent this by shutting the circuit down when the arc fault occurs.

So what do you need to know about arc fault circuit breakers? To start with, by code AFCI’s should be installed on any circuit that isn’t protected by a GFCI or directly wired into an appliance. It’s in your best interest to have your safety devices routinely inspected to maintain their optimum performance and capabilities; in particular, your circuit breakers should be inspected at least once a year. The inspection process is quick and relatively inexpensive, and something that simple really can save the lives of you and your family.

Older homes have a very distinctive look and feel and some people prefer to invest in older properties, rather than in a newer one. These homes have an old world charm and offer great value too. But most of these homes also have older installations and some basic upgrades and improvements can give them a new lease of life.

While most property owners do get the house painted, add new features and furniture etc. very few consider getting the extension cord doesn’t have the capacity to power multiple devices simultaneously. The safest thing to do is to get more powerpoints installed at the time you get the rewiring done. When you are planning this installation, take into account the number of appliances used in your home and get that number of (or more) power points fitted in the different rooms.

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.