It is estimated that thousands of electric shock accidents take place each year, of which some are fatal ones. Aside from this, there are incidents of electrical fires caused by poorly-installed or ill-maintained wiring. It’s important to understand that most of these fires and accidents are avoidable. There are some simple things you can do to prevent an electrical fire from erupting on your property, including:

Never try to force plugs into the outlets and don’t remove the third prong which is the grounding pin, to fit it a plug into an outlet with 2 prongs. Do not plug in too many appliances into a multi-plug outlet.

Check whether there are any loose-fitting plugs as these can be a fire/shock hazard. If you notice that any of the wall plates are broken/missing, replace them without delay. So that the components and wiring aren’t exposed. If you have very young kids in your home, make sure that you cover all used outlets.

Check the cords for fraying or cracks. Pay special attention to ones that are placed in any high traffic areas or under rugs and carpets.

Make sure that the wattage of the bulbs is compatible with the fixture requirements. If you find any bulbs with a higher-than-recommended wattage rating, replace them immediately. It’s also important to ensure they don’t overheat and that they are screwed-in securely.

These should never be used on a permanent basis. Use ones that have safety enclosures to protect kids from burn injuries and shock.

There should be GFCIs installed in the kitchen, bathrooms, garage, basement and various other indoor and outdoor outlets in your home. Test these on a monthly basis to ensure they are working as required.

Only older properties have fuse boxes and these don’t have the capacity to withstand the heavy electrical loads required by modern-day equipment and appliances. It’s far better to get these older systems evaluated by a skilled electrician and replace them with modern circuit breakers.

Faulty or old wiring is one of the commonest causes of residential electrical fires in Australia. Get these checked periodically for loose connections, loose wall fixtures or wall receptacles. If you hear any hissing, sizzling or popping sounds behind walls or from sockets, call in your local electrician without delay to get these installations inspected and replaced. If you find that any switches or electrical fixtures are hot to the touch, get those checked as well. Flickering light bulbs are another indication of problems in the electrical wiring as well and it’s best to get a thorough check conducted.

If you find that a specific circuit breaker trips repeatedly, or you experience shock when you touch it, you should unplug it immediately and get it replaced or repaired. Check for damage or cracks in the connectors and wiring and install surge protectors to protect all your expensive electronics.

When you upgrade your home, make additions or add extensions like extra rooms or an extra storey etc., or even add a large number of new equipment or electrical appliances to your home, that can overburden the existing electrical installations. At this point you would have to increase the service capacity of your home’s electrical system.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to install, maintain and upgrade all types of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

There are always things that need to get done around the house. Some of those jobs tend to be more obvious than others. Things like repainting the walls, fixing the brick pathway or oiling squeaky door hinges tend to be more obvious. However, there are some little things that deserve our attention as well. Little things that are silent, but ignored or used improperly, they can become extremely dangerous. We are referring to the electrical outlets in the home. Little, insignificant and rarely focused on outlets pose a threat explains your Pasadena electrician. The team at The Electric Connection wants you to know you can help make your home a little safer by giving those outlets some well-deserved attention.

There are too many homes that do not have the GFCI outlets in the kitchen and bathroom areas. These outlets have been designed to trip the breaker within a split second of the circuit being interrupted. This one little feature can save lives by preventing electric shock. If you are not sure what the outlets are or whether you already have them or not, a quick visual will tell you the story explains an electrician in Pasadena. A GFCI outlet will have 2 small buttons in the center of the outlet between the top and bottom plug-ins. If the circuit is interrupted, you will want to unplug whatever device triggered the trip and push the reset button.

This one small feature is an important safety feature, especially when water is nearby, like the kitchen or bath areas. It is an inexpensive, quick upgrade that could save lives, prevent minor shocks and electrical shortages that could result in a fire. If you are ready to make this minor change, call your electrician. Pasadena homeowners will appreciate the additional safety precaution. Give The Electric Connection a call today and schedule your GFCI installation.

If you’ve ever seen “National Lampoon’s Christmas Vacation,” you’ll know that Clark Griswold’s perception of Christmas decorating is a bit extreme.  Although that movie is comical, in reality electrical safety is no laughing matter, and an electrical fire can ruin your holidays instantly.  Here are a few holiday decorating safety tips.

The holidays are meant to be enjoyed with friends and loved ones, and by following these few safety tips, you can help to make sure you’re not a victim of a “Clark Griswold” Christmas.  If you want to learn more about your home’s current electrical state, contact the best electrician Plano has to offer.

Happy Holidays!

Having smoke alarms is one of the essential ways you can protect your family in your home. The NFPA (National Fire Protection Association) has estimated that nearly 70 percent of those who perish in a house fire were in homes where there was no smoke alarm. Additionally, it is estimated that nearly one thousand deaths per year could be prevented by installing smoke alarms in every home. Learn more about the considerations you must make regarding smoke alarms and then call a Los Angeles electrical company, such as The Electric Connection, to install this important device today.

Building Codes

There are building codes that mandate the installation of smoke alarms. These are developed at both the state and local level. Since there are so many codes and requirements you must keep in mind, it is recommended that you find an electrician in Los Angeles that has a thorough knowledge of NFPA 72 – National Fire Alarm Code as well as these local ordinances.

Location

It is important not only to have a smoke detector, but also to install enough and install them in a proper location. It’s important to install the number of smoke detectors that are required in your area. Additionally, connecting the detectors, means that there will be an early warning if a fire breaks out in another part of the home. When working with an electrician, Los Angeles residents should request that the detector be mounted on the ceiling or high on the wall.

Power Source

A smoke alarm can operate on batteries, electrical systems or a combination. An alarm that operates on both is most desirable, since it protects you even if there is a power outage or dead battery situation. Testing your smoke alarm regularly is vitally important to make certain it will be there for you when you need it.

If you want to talk to a Los Angeles Electrician about installing a smoke alarm system in your home, visit us at ElectricConnection.com or call us at The Electric Connection today.