Tangled wires are a pain in the neck. That's true whether you're managing multiple devices at your computer desk, trying to find space at a cluttered kitchen counter or juggling power tools at your workbench. One way to bring order to chaos is to create an overhead power strip, a project you can DIY with some very simple electrical work. Read on for some tips to get started.

A Simple Solution for Your Electrical Work

To create the most basic version of an overhead power strip, all you really need is a piece of wood, some screws, and a mountable power strip (look for one that has slots for screw heads in the bottom). For added convenience, a plastic raceway or access to a router tool will be helpful to secure the power strip's cord to the wood.

The first step, in that case, is to either use the router to cut a slot in the wood that can hold the cord, or attach the raceway to the wood for the same purpose. Make sure you leave room to attach the power strip itself, and there is enough cord left at the other end to reach the nearest outlet.

Securely Installing the Strip

Next, measure how far apart the screw slots are on the back of the power strip, and mark the distance out on the wood. Install appropriately-sized screws at the marked spots, leaving some clearance under the screw head so the power strip can easily slide on and off. Test out the setup and make sure that the strip fits and can hang securely upside down – if it's loose, you may have to adjust some of the screws.

Finally, you need to decide how to mount your overhead power strip. Options include hanging it under a kitchen cabinet or shelf on the workbench, affixing it to a wall, or using a post to hang it closer to the center of a room. Remember, this power strip is for your convenience, so you want to position it where it will be most useful.

Customize the Power Strip to Your Convenience

Of course, once you get the idea for how to hang a power strip, you can then customize it to your liking – for example, putting a hinge on the end allows you to swing it back against the wall when you aren't using it. You can also branch out with many of the modern, innovative power strip models on the market to customize your workspace even further.

For help keeping your cords in order, or assistance with any other electrical work, contact an expert electrician today.

Do you or does someone that you know have a Federal Pacific Electrical panel in their business or home? There are a number of reasons that these panels are unsafe, which means that they should be replaced as quickly as possible. One of the first reasons is simply because they are so old. Federal Pacific panels have not been installed in many years. The main reason that they should be replaced by your electrician in Los Angeles is because the circuit breakers in the panel may not always trip whenever they should. This can lead to some very serious issues with your home’s electrical system.

An Example

A couple years ago, one of our technicians were called out to inspect a circuit wire that appeared to have bubbled up. Whenever he arrived at the location, he discovered that this particular circuit had been overloaded so far that the sheath covering on the cable started to boil. Upon further inspection, he found out that the power for this particular cable came from a Federal Pacific electrical panel. What happened, was that the homeowner’s air conditioning unit was experiencing issues that caused it to seize up, continuously pulling more and more power from the panel. Rather than tripping like it should have, the circuit breaker remained on, leading to the boiling cable sheathe.

Although we were able to correct this problem relatively quickly, it could very easily have turned out much worse. This overloaded wire could have caught fire, or remained unnoticed and poorly insulated until it came into contact with a person or with another item that led to serious electrical shock or other injury.

The moral of the story is to have your home regularly inspected by a Los Angeles electrician for proper safety. For more safety tips or information about unsafe electrical panels, visit The Electric Connection at www.theelectricconnection.com.

There are numerous different ways in which an electrical fire can break out in the home and a number of ways to prevent it as well. Today, you will find there are a large number of electrical system protection devices on the market and this can make it a little difficult to decide which one will work best for your setting.

One effective installation you can use to prevent electrical fires in your home is an custom solutions to residential and commercial clients across Sydney.

In case there is a flash flood or storm in your area or if there is a severe plumbing leak or pipe burst, that can result in flooding of water in different areas of your home. Water can cause a lot of damage to the installations and features on your property, and you would have to start the clean-up and repairs without delay. This is also when you start evaluating what can be salvaged and what would have to be replaced – and this includes your home’s wiring.

The wiring inside the walls can become dysfunctional and dangerous if it’s exposed to or submerged in water. If there is a severe flood, it becomes important to completely replace the wiring in your home. Not too many builders actually use wiring that’s rated for water exposure of this kind. Of course, not much can be done till the time all the flood water recedes and all the water has been cleared out from your home.

Even when all the water is pumped out from the indoor spaces, it’s best to shut down the electricity supply at the circuit box mains before continuing with anything. Call in your local electrician to test the wiring in your home. Even if it is still in a working condition, it’s never a good idea to use it.

The insulation can get degraded and that can raise the chances of an electrical fire in the future. In addition, when there are traces of moisture in the wiring, that leads to mould & mildew growth and the metal parts in the system can corrode. This is especially the case when the property has become flooded with salty water.

When it comes to rewiring jobs, you also have to factor in the cost of opening up the wall panels and fixing them. In instances of a flood, the walls are generally torn down right up to the framework. If you take this opportunity to upgrade the wiring in your home, you can save a significant amount of money.

Floodwater is never clean and that proves to be an additional hazard to the wiring and other installations in your home. Chemicals, oil, sewage and a number of other contaminants that come with the floodwater work their way into the smallest spaces, and this is why it’s best to just start afresh with the installation. In comparison, if your home’s wiring has been impacted by water from a burst pipe, you might be able to save these features; this is because it may not be fully-submerged in water.

However, it’s never a good idea to test the condition of the wiring yourself and you should call in a skilled and licensed electrician to thoroughly check and evaluate the installation and give their opinion. Regardless of whether the wiring in your home has got impacted by flood water or water from a damaged plumbing installation, it’s important to get it checked without delay. The professionals will provide suitable solutions based on the condition and location of the wiring.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to handle this job in an expert manner. We can install and maintain all type of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263