If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

You may not be aware, but you can have Top Dallas Electrician, ElectricMan Inc. can offer a way to avoid these charges, and Lower Electric Bills by making sure that you are using the least amount of electric company power as possible during peak times.

An Indoor Generator is a unique solution that allows you to store power, either from your power grid when it is cheaper, or utilizing other renewable energy sources, and decide when you want to use it. This highly intelligent equipment allows you to program when and where you get your electricity, providing incredible independence and capabilities for Lower Electric Bills.

Take this as an example.  One local electric company uses a general rule of enforcing peak usage fees between 4pm and 8pm, so programming your system to use power stored during off peak hours at these times will allow you to stop paying these peak usage fees, and only pay the standard rate for electricity during normal usage hours.  This is a far more effective solution, since it is impractical for most home owners to change their schedule and stop using power during these times.

Once you have an Indoor Generator system in place and programmed, the system will automatically switch to your stored power during the times that you have chosen, leaving you worry free about when you are using your electricity!

CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.