Renovations present a two fold risk to exposing families to potentially dangerous chemicals. First, the demolition of what is being replaced during renovations can release dust, mold and other allergy causing particulates in the air. It can also release asbestos fibers. Asbestos can be found in older tile flooring, ceiling and roof materials, exterior siding, covering pipes and pretty much anywhere else since it used to be widely used. It is associated with mesothelioma cancer.

The new materials being installed will put off volatile organic compounds (VOCs) to one degree or another in the form of gases. New furnishings, cabinets, flooring and other renovation products and materials can release gases such as formaldehyde and benzene. The EPA warns of VOC side effects that include coughing, wheezing, sneezing, burning throats and eyes and skin reactions. Exposure is also associated with long-term systemic effects such as liver and kidney disease.

There are different ways to control exposure. One is to choose a contractor with experience in reducing the amount of particulates that get into the air during the demolition phase. If asbestos is known to be present or discovered, a professional asbestos remediation team should remove the materials. There are also contractors who are aware of ways to control exposure to VOCs released by new furnishings and construction materials.

Most people associate that odor of newness that new products have as being a good thing. However, the very presence of the odor is an indication that the product is off-gassing something. The odor may be something that triggers a severe asthma attack in a susceptible person. It may end up causing harm in the long run. The way to know is to become an informed consumer.

Contact each and every manufacturer of every product and material being used in the renovation of the home. Ask questions about risks of having or using the product in the home. It may be a real eye-opener to some people when they find out the answers. Ask the contractor to save every scrap of paper included with the packaging of the new items being installed. Products do come with warnings about VOCs, yet many homeowners never see the warnings.

The state of California is rigid when it comes to warnings about consumer products. However, it is just a warning. People can still choose to install products that put off more VOCs or worse yet, release lead and other toxic and even cancer causing substances. Though no option in new renovations is perfect, there are choices that can be made between product types to reduce the amount of dangerous chemicals and substances released in a home during renovations.

It takes time to do some research before buying that new set of kitchen cabinets or picking that new carpeting for the living room, but it is worth it. With indoor air being the air most families breathe the most of, it makes sense to take precautions to make it as clean and pure as possible for your entire family.

Click here to visit our website.

Have you ever noticed a small spark when you plug an appliance into an outlet? This may be normal or it could be cause for concern, depending on the size and frequency of the electrical outlet sparking. It’s important to recognize the difference between a normal spark and a dangerous one—as well as possible causes for outlet sparking—so you can pursue an electrical repair if necessary.

The supply line that carries electricity through your home measures about 115 to 240 volts with a frequency of 60 hertz. In layman’s terms, this means the flow of electricity runs very fast and hot through the wires behind your walls.

Electrical outlets tap into this fast-flowing stream of electricity, powering everything from your lamps to your laptops to your coffee maker. A small blue spark arcing from the outlet to the plug can occur as the appliance suddenly draws amperage and electrons begin to flow through the cord. Once the flow steadies, the spark should disappear. This type of electrical outlet sparking is completely normal and comparable to static electricity.

Electricity generates heat as it travels through wires. Insulation surrounding a wire may begin to melt, exposing the bare wire. If it comes in contact with the metal outlet casing or even another wire, electrons can leap out of the wire and create a dangerous spark. This is called short circuiting and could cause an electrical fire if not repaired promptly.

Short circuits may be caused by a number of things, including old outlets with loose connections and too many appliances being plugged into the same outlet via a power strip or extension cord.

Water and electricity don’t mix. That’s why bathrooms should have special outlets called ground fault circuit interrupters (GCFIs). These outlets automatically shut down the circuit when they detect water, which can help prevent electrocution and house fires. If the bathrooms in your home have ordinary outlets, you should have an electrician replace them with GCFIs.

If you’ve had an electrical problem in the past, you may have attempted to perform a repair yourself or used a cheap electrician. Electrical wiring can be extremely dangerous if you don’t the proper licensing and qualifications and lead to potentially serious issues, electrical outlet sparking being just one of them. Fortunately, a professional electrician can undo the damage and make your outlets safe to use once again.

When you need a repair for electrical outlet sparking, Kolb Electric is the company for the job. We hire only licensed, fully qualified electricians to handle important outlet wiring repairs in your Maryland, Virginia or Washington DC home.

Contact us today to schedule an appointment or call 877-287-1179 to have an emergency electrician sent straight to your home.