It is that time again—electric bills are on the rise. You can chalk this up to a number of different causes, but the fact is, electricity is getting more expensive. You can’t do much about controlling the rates, but you can do your part to reduce how much electricity you use and ultimately reduce your monthly electric bill. A Pasadena electrician wants to help you do just that and has some tips for you to implement in your home so you can save a few extra dollars. The team at The Electric Connection can answer any questions you may have about electric savings.

1-It is important you make a real effort to turn off lights and electronics whenever they are not in use. Turning off the appliances is not always enough. You need to unplug your electronics as well to reduce phantom power.

2-Take the time to replace any of your old incandescent light bulbs with the newer, much more energy-efficient CFLs. This can ultimately save you a quick $20 or thereabouts on your monthly electric bill. Don’t put off replacing those old bulbs.

3-Switch your dishwasher setting to air dry. Only wash full loads to conserve energy.

4-Air dry your clothes whenever possible to cut down on your electric bill. Only wash full loads of clothes and if you must use your dryer, only dry full loads.

5-Consider having a ceiling fan installed by an electrician. Pasadena homeowners can take advantage of the cost savings ceiling fans provide on both the heating and cooling bills of a home. Fans can be placed throughout the home to circulate air while keeping the home at a comfortable temperature.

This is just a very small sampling of the energy savings tips you can put to use for you. Give The Electric Connection a call today and schedule your ceiling fan installation.

When looking for a home a lot of homebuyers flip the light switches, check the outlets, briefly look at the electrical panel, and think that the electrical system is perfectly fine. However, this is not always the case and it is important to have an expert come in for inspection.

Your home’s electrical system will age, just like your plumbing, roof,  air conditioning and heating system.  Those systems can have unexpected issues and problems, and so can your home’s electrical system.

Over ten years, the reliability of your homes’ electrical system can deteriorate greatly. Certain components can expire, like smoke detectors. Other items can wear out and not function properly like light switches, receptacles can wear and lose retention, GFCI outlets and smoke detectors may not be operable and may not be there when you need them most. Here are a few electrical components that can change over time and here is some information regarding other problems associated with older homes electrical systems.

A ten year checkup is a good idea. We always will perform a complete inspection with every service call. But if you haven’t needed to call in an electrician for a while, it’s a good idea to have one come in at least every ten years and provide a comprehensive check of your electrical systems.

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

This year I’m seriously jazzed about the 2012 Emmy nominees – especially for Outstanding Lighting Design. Admittedly, I’m a sucker for theatrics (dating back to long before those college stage makeup classes and my Cirque du Soilel-level Halloween costumes) but honestly, these nominees are amazing. Here’s what the Academy has laid out for us this year:

Outstanding Lighting Design/Lighting Direction For A Variety Series

So You Think You Can Dance

Last year’s winner is at it again, producing number after flashy number. Lighting designer Robert Barnhart along with lighting directors Matt Firestone, Pete Radice, and Patrick Boozer are ones to beat, for sure. Check out this dramatic jazz piece from the Season 8 finale, it’s truly unforgettable:

Dancing With The Stars

This show is a first time nominee in the category, but lighting designer Simon Miles and lighting directors Matthew Cotter and Suzanne Sotello are definitely ones to watch out for. Check out this Halloween-themed Paso Doble featuring Ricki Lake, and you’ll understand why this lighting team has earned a coveted nomination:

American Idol

This program won the title in 2009, and this year the same team of lighting designer Kieran Healy, and lighting directors Joshua Hutchings, George Harvey, and Matthew McAdam are at it again. This highly talented group might just have what it takes to win again. See for yourself in this clip of Phillip Phillips (season 11 winner) singing at the Idol finale:

The Voice

Another newcomer in the category, The Voice has really made a splash in its second season. Lighting team Oscar Dominguez (designer) and Daniel K. Boland (director) have made sure that the voices aren’t the only remarkable thing about this show. Check out this video of season 2 winner Jermaine Paul (from team Blake) and you’ll see what I mean:

Approximately 200 electrical fires occur in B.C. each year with a large portion of these fires found in older homes. As sad as it is, it’s understandable. Homes built before 1970 didn’t have the types of technology we have today – not only to build a more sound electrical system but to sustain the types of products we now use on a daily basis (coffee machines, hairdryers, computers, the list goes on). If you live in an older home or are looking at buying one, be aware of these electrical hazards.

Wiring – New cables and methods of wiring have been introduced since the building of your old home. These new cables provided ground protection, higher rated insulation temperatures and are suitable for recessed lighting. This eliminates the need for knobs and tubes, which proved to be a fire hazard overtime.  If your wiring is older than 30 years, it is recommended to have an electrician review the safety of your wiring. If caught early, you may be able to simply modify your wiring rather than rewire your entire home.

Amps – The standard home in 1970 was equipped with 30 amps of power whereas now homes are equipped with anywhere from 100 amps to even 200 amps of power. With the increase in electrical devices used in a home, 100 amps have now become the standard requirements for all new homes. Review your home’s usage and determine whether it is necessary to improve your electrical system.

Arc Faults – When electricity is released unintentionally from a wire or cord the surrounding material can catch fire which is called an Arc Fault. Arc Faults are one of the highest sources of electrical fires. However, by installing an Arc Fault Circuit Interrupters (ARCI) you can prevent them.

Contact Expert Electric for assistance in determining the safety of your older home and how to prevent the tragedy of an electrical fire. 604-681-8338