While you want to get out of the house and on your way without worry, if you let things go or do not call the right electrician your house could burn down while you’re away at work. Many times electricians have pulled outlets and seen in the wall where small fires have started and the homeowners had no idea because it had not spread. Bathroom electrical outlet repair can save your family and possessions.

Yet it could be that your outlet is not secure and moves around too much from all the pushing and pulling. This is when you want an honest electrician to tell you that it is minor and can be repaired quickly.

If you have not scheduled an inspection of your electrical wiring and you are encountering problems like needing to have your bathroom electrical outlet repaired, it may just be the time to stop and have the whole house inspected while your licensed electrician is there. Not only can he fix your immediate need, but he can show you where you may have potential problems within the next six months to a year. It is always better to be proactive rather than reactive. If you wait for an issue to arise, you may have to pay extra for a service call during evening hours.

There is another issue when you discover your bathroom electrical outlet needs repair. It has already been mentioned that it could possibly be a fire hazard, but also a faulty live wire could electrocute or shock a person who has just plugged an object in – or is removing it after the outlet seems to have given up the ghost. While waiting for repairs, do not let children plug anything in. Safety comes first.

Local Dallas and Plano Electrician, ElectricMan Inc. Performs Their Landmark 10,000th Job For a Local Veteran and Retired School District Employee.

Dallas, TX based ElectricMan Inc., a licensed Dallas and Plano electrician with over 27 years of experience providing electrical repair and installation services, has reached a landmark in their service to the local community by performing their ten thousandth job for local homeowner, retired military veteran, and retired school district employee Mr. Frank Norwood.

As a thank you to Mr. Norwood for his loyal repeat business and a celebration of this huge milestone for the company, ElectricMan Inc. installed a new ceiling fan and ceiling fan rated brace kit in Mr. Norwood’s master bedroom at no charge.  Master electrician and Owner of ElectricMan Inc., Nick Schaeffer, said “We are very excited to have passed this milestone as a company, and are honored and happy to provide this complimentary service to Mr. Norwood, a gentleman who has given so much for this country and the community.”

ElectricMan Inc. is committed to providing the absolute best customer service and reliability in serving the local community’s electrical repair and installation needs.  In light of the current status of many businesses, for a local company to reach the landmark of 10,000 jobs certainly speaks to their character and the quality of service that they provide.

About ElectricMan Inc.

ElectricMan, Inc. has more than 27 years of experience in residential and commercial electrical work and is a family owned and operated business based in Dallas, TX that puts family first. ElectricMan’s motto is “Quality Electrical Services”. We achieve this through our employees. Our professional, licensed, experienced technicians are here to serve your electrical service and repair needs. For more information, please visit our website at www.electricmaninc.com.

ElectricMan Inc.

13551 Floyd Circle

Dallas, TX 75243

Nick Schaeffer, Owner

NickS@electricmaninc.com

972-792-7270

LED sign lighting provides years of illumination and low energy costs. sign modules that consume 50mA of power each. Required materials differ depending on sign size, module size, length of wire between modules, current draw, and lumen output.

Materials:

1. First, measure your sign. Although we recommend spacing module rows 3 inches apart, it’s ultimately up to you. If you want a brighter sign, place them closer together and vice versa for a dimmer sign. With the recommended 3-inch spacing, a 4-foot square sign would need 150 modules (15 rows of 10). Again, the quantity of modules needed  is based on many factors and can differ.

These LED sign modules are available in custom lengths of up to 20 modules per strand. Order 60 feet (4 feet x 15 rows) of stranded modules, and cut the strand after every 10 modules. Each strand can be cut to make two rows.

2. Next you’ll need to order a power supply that’s rated for the combined wattage of all sign modules. To ensure that you don’t overwork the power supply, confirm that the total wattage of your modules is at least 20 percent less than the power supply’s rated wattage.

An easy way to calculate this is to multiply the total wattage of your combined lighting by 1.2. In the 4-foot sign diagram, there are 150 modules with a current draw of 50 milliamps (mA) each. Since current draw is given in milliamps, multiply that number by voltage and move the decimal 3 places to the left to get wattage. This module consumes 50 mA and has 12 VDC operation, so it consumes 0.6 watts (50 x 12 = 600). Next, multiply 0.6 by 150 to get a combined wattage of 90 and multiply that number by 1.2 (90 x 1.2 = 108) to determine which power supply you’ll need. Since the result was 108, you will need at least a 120-watt power supply.

3. Next on the list is wire to connect all your sign module stands to the power supply. For a 4-foot sign, you’ll need 4 feet of 18-gauge two-conductor wire to serve as your main line plus enough to cover the distance between your power supply and where it will be wired into an electrical system. You’ll also need dual-channel T-tap wire splice connectors for an easy connection to your main line.

Before you begin working on your sign, turn off power to the area.

4. If there isn’t one already, drill a hole in the back of your sign as an exit point for your wire.

5. Use a tape measure or ruler to plot your row spacing. Leave space on one side of the sign for your module-to-main-line connections. Mount the sign modules using their double-sided adhesive and/or screw holes.

6. Insert the end wires of each sign module row into the T-tap splice connector, and clamp the other end of the connector onto the main line. The splice connectors eliminate the need to strip wire insulation.

7. Use double-sided foam tape to secure each T-tap splice connector to the inside of your sign.

8. Reattach your sign’s front cover.

9. Connect the main line to your power supply, wire the supply into your electrical system, and restore power to the area.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Find Stunning Game Room Lighting to Compliment Your Home’s Style

Ceiling lighting, in a game room should coordinate and compliment the rest of your home’s interior space.  Game room lighting can also be fun and a bit whimsical without going overboard too.  At Capitol Lighting, we can show you how to successfully coordinate your game room lighting with the rest of your home’s style.  We can also show you hundreds of ceiling lighting styles that coordinate perfectly above a pool table, bar island or even a retro pinball machine!