One of the most affordable and effective components of any home security system is motion detecting outdoor lighting. Installed by a professional electrician, these lights can give you years of reliable service and peace of mind.

But like any part of your household electrical system, problems can arise from time to time. If your outdoor security lights are staying on all the time, not coming on at all or otherwise performing poorly, you can try these simple DIY fixes before calling an electrician.

Most motion detecting light fixtures allow the motion detector to be aimed at a specific area. If your lights are coming on too often, it could be that the sensor is aimed at a nearby street or an area where wildlife roam around at night. If the lights aren't coming on at all, the sensor might be aimed directly at the ground or into the side of the house. Experiment with different sensor positions after dark and walk around in the areas you want to secure to fine-tune your aim.

Motion detectors also typically come equipped with sensitivity settings. Too sensitive, and something as small as a fly could set it off. Not sensitive enough, and a prowler could come within a few feet of the fixture before it lights up. Locate this setting and fine-tune it to your liking.

Another common setting for motion detector lights is a light duration time. This can be as long as 30 minutes, and if your lights are unwittingly set this way, it could give the impression that they stay on all night. A good duration for most security light applications is one to two minutes.

A dirty sensor can’t detect movement properly. If dirt and dust have accumulated on your motion detector, use a wet rag to wipe it clean, then re-test your lights.

Security lights can get off-kilter if there are interruptions in the electrical supply, such as power outages, power surges and accidentally flipping light switches or breakers. Sometimes this can result in lights that stay on or off all the time. To reset most motion detecting lights, shut off the power supply at the switch for at least 30 seconds, making sure there’s no motion in front of the sensor during this time. Then turn the light back on and test it to ensure proper function. If there was motion in front of the sensor while the power was off, this may need to be repeated.

Not all motion detector problems can be fixed this easily. If you have persistent problems, storm damage or faulty installation, it’s important to call in your local licensed electricians for a professional evaluation and repair.

Nothing is more important than your family's safety. That's why you need to make every effort to identify and eliminate fire risks in and around your home, particularly in your electrical work. Faulty wiring, delayed maintenance or carelessness can lead to a disaster that can cost you your home and endanger your life. Read on to learn more about the most common causes of electrical fires and how you can prevent them.

Power in Percentages

Electrical failures contributed to about 47,700 home structural fires in 2011, according to a report by the National Fire Protection Association (NFPA). Those fires resulted in 418 deaths and $1.4 billion in damage. Clearly, the stakes are high in making sure that the electrical work is safely installed in your home.

According to the NFPA's report, 48 percent of home fires caused by electrical failure were started by the electrical distribution and/or lighting systems. Of that 48 percent, 63 percent were started by wiring, 20 percent by lighting, 11 percent by cords and plugs, and 6 percent by transformers and power supplies.

Fans caused an additional 6 percent of electrical fires, washers and dryers another 6 percent, space heaters 4 percent, air conditioning 4 percent, water heaters 3 percent and stovetop ranges 3 percent.

Don't Become a Statistic

The good news is that electrical fires have declined steadily since the 1980s. Modern technologies and building techniques have lowered the risk of fire and kept everyone safer. However, there's no reason to be complacent when it comes to safety. To decrease your risk of falling victim to a fire caused by your electrical system, follow these tips:

Keeping Your Family Secure

Stay vigilant about maintaining your electrical equipment and follow all safety recommendations to reduce your risk to a minimum. If you are concerned that your home is at risk of fire, have a qualified electrician inspect your electrical work and point out any danger areas without delay.

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

If you or someone in your family regularly uses a hairdryer, there’s a good chance that you’ve tripped a breaker at some point. Generally, this happens at the most inconvenient time—probably when you’re getting ready for work or a night out. There are a lot of electrical devices in your house, so why does the little ole’ hairdryer cause so many problems? Part of the problem is the way hairdryers work, but your power outlets and wiring could also be the culprit.

When the Problem is the Hairdryer

Believe it or not, hairdryers actually may  just as much power as a microwave (around 1500 watts). Many breakers are rated for 1800 watts, so they can’t handle the load if you have several other electrical devices—like a vacuum, TV, computer,  or lamp—plugged in along with the hair dryer.

Also, hairdryers run on a motor, and, like most motors, faulty maintenance can cause problems. In the case of hairdryers, they often have screens or filters that get clogged over time, causing the hairdryer to use more power than it would normally, and this extra power usage could  trip the breaker and possibly destroy the hairdryer.

The electrical connections in the devices themselves could also trip the circuit. A faulty cord, or wires making contact within the device can also kill your power.

When the Problem is Something Else

Diagnosing the Problem

24-Hour Emergency Electrical Service

We offer a 24-hour emergency electrical service to address any residential electrical issue. Give us a call anytime if your hairdryer has caused a mysterious short in your power or if you detect any other potentially dangerous electrical issue.