There are many ways that electrical fires can start in the home, any many ways they can be prevented. With all the tools on the market it can be hard to know what you should be using to protect your home. One important tool that you can use to prevent electrical fires is an arc-fault circuit interrupter (AFCI). An AFCI could prevent electrical shorts and damage on circuits around your home.

Arc faults occur when electricity leaves the circuit and the current travels to a different pathway. This can occur if a wire is cracked, cut, or broken. When the wire becomes exposed the electricity can travel out and into the surrounding objects. When the electricity makes contact it will heat up significantly which can cause a fire. If this arcing occurs in your home, chances are the surrounding materials are wood or insulation. Once an arc fire starts, it can do significant amount of damage before you are made aware by the sound of your detector.

An arc-fault circuit interrupter (ACFI) can be installed on receptacles and circuit breakers to shut off the flow of electricity when it detects an arc about to occur. Because arcs are a sudden surge of power, standard circuit breakers may not shut off before the arc occurs as they are designed to prevent short circuits and overloads. Sudden surges of power in the electrical system can occur when devices and appliances, like a vacuum cleaner or light switch, are turned on. These are normal occurrences, which will be detected by the ACFI and allowed. But the ACFI also monitors the circuit for dangerous arcing and is ready to shut off the flow of electricity immediately when it occurs.

While many homes in Canada may have ACFIs installed, it has not always been a requirement. For homes that have been built before new electrical code requirements in 2002, there are likely no ACFIs installed in the home. This makes you vulnerable to arcs that are more likely to occur in older homes due to aging wiring. Currently, it is standard to have ACFIs installed on all bedrooms.

Our Expert Elections are experienced in installing AFCIs. Our electricians can detect if there are AFCIs currently installed in your home, and which points of your electrical system are critical and should have an AFCI installed. If you are unsure about your homes protection, call your local Expert Electric at 604-681-8338.

With summer weather driving you indoors where it is much cooler, you may be looking around the house and thinking you could change this or that to make it all a little better. Home remodels range from very minimal renovations to big changes that may include adding a room or completely removing walls. All of this will make your home a little more perfect for you and your family, but home remodels can be a lot of work. While small renovations are typically something the average homeowner will attempt to do on their own, an electrician in Santa Monica points out that even the smallest changes should be evaluated by an electrician. You can count on the team at The Electric Connection to send out an experienced electrician to handle the inspection for you.

When you hire a Santa Monica electrician to inspect the area you plan to remodel, you will get a good idea of the electrical work that is involved in the remodel. Often times, homeowners forget all about the electrical wiring that is needed with any renovation. During the inspection, you will be told what all is hiding behind the walls and what would need to happen to move the wiring. Things to consider are light fixtures, outlets and data lines. If you are planning on adding more outlets, your electrician will need to evaluate whether or not you have enough room in the breaker panel to do so.

Another important part of the inspection will be to determine the condition and age of your existing wiring. This is always a job for an electrician. Santa Monica homeowners who live in homes that are more than 30 years old will appreciate the information. Outdated wiring could be a fire hazard. Upgrading the wiring will make your home safer while potentially saving you money on your homeowner’s insurance. Give The Electric Connection a call today and schedule your home inspection before you move forward with any remodeling plans.

The kitchen island is one of the most functional and versatile areas in your home. Centrally located and serving as a morning breakfast stop, dinner prep and work station, as well as a gathering spot for entertaining and showcasing decorative kitchen accessories.

From classic and traditional to rustic and futuristic, an island light is a major design feature vital to the look and usefulness of your kitchen.  Choose wisely and install with precision to create balance and deliver the perfect blend of ambient, task and accent illumination.

5 Steps to Finding the Perfect Island Light(s) for your Kitchen

1.  Provide for plentiful, energy-efficient task light with  LED (light emitting diode) light fixtures.  New LED lamps are dimmable and available with improved color-rendering and color temperature.  Look for bulbs with a CRI (color rendering index) of at least 80 and CCT (correlated color temperature) between 2700K and 3500K.

2. For ambient or general illumination, recessed lighting may be added to blend with a decorative island fixture.  New OLED (organic light emitting diode) island lights are ideal for general illumination.  OLED light fixtures are outstanding and the illumination is glare-free, crisp and clean.  You may choose to use a variety of pendant lamps, track or rail light fixtures, or a single ceiling fixture for general illumination, but be sure that all fixtures are shielded and installed at the right height.

3.  Browse lighting stores and designer lighting websites to get an idea of what type of kitchen island light fixtures would work best in your space.  Keep the lighting traditional, if you have a country kitchen; go with a more high-tech modern design, in a contemporary kitchen.  The trend toward urban, rustic and organic minimalism offers the ideal venue for many of the new kitchen island fixtures for 2014.

4.  If you have a large kitchen island, accessorizing with a mini table lamp provides a subtle elegance. Mini table lamps also serve to bring the scale of a large kitchen in balance.   Chosen wisely, the right mini table lamp makes a true fashion statement and provides a prized finish.  NOTE:   Be sure portable lamps are sturdy and located in a secure spot, safely away from the kitchen sink or stove top.

5.  Top quality lighting controls and switches are crucial to the lighting design and usefulness of your kitchen island fixtures.  Don’t skimp when it comes to finding and installing control panels and switches.  The right system will greatly enhance the enjoyment and energy saving benefits you receive from your kitchen, the true heart of your home.

GENERAL GUIDELINES FOR INSTALLATION:

•Pendant island lights should hang about 66 inches above the floor.  If the shades are not very deep and there is seating at the island, pendants may hang lower at about 60 inches above the floor.  In rooms with 8-foot ceilings, aim for a 30-inch span between the top of the island to the bottom of the island light; In rooms with higher ceilings, raise the light fixture about 3 inches for each additional foot of ceiling height.  NOTE: Make adjustments according to your personal preference, overall lighting effects, and the size and shape of island light fixtures.  Some island lights look and function best when suspended lower and closer to the island; others look best when installed closer to the ceiling.

•Usually, an odd number of mini pendant lights centered over the island creates better balance. Install one pendant lamp per every two feet of island space.  For example, a six-foot island requires three pendants – one in the center and the others 20 inches away on either side. Take into consideration unusual sizes and shapes of chosen island light fixtures to adjust the spacing and amount of light fixtures required. Thin, tapered mini pendant lamps may look better with an additional fixture; oversized pendant lamps may look better installed as a pair centered over the kitchen island.

• Whether attached to a track system or installed singly into the ceiling, the overall ensemble—which may be composed of a few mini-pendant ceiling fixtures, one large island light or two oversized pendant lamps—should measure from one-half to two-thirds the total length of the island and be at least 12 inches narrower than the width of the island to allow for freedom of movement around this versatile space.

Visit an American Lighting Association (ALA)-affiliated showroom for more advice on how to get the best kitchen island illumination.  Certified lighting professionals at Capitol Lighting will help you find the right island lighting, and they will be able to provide the answers to your specific installation questions.

Check out these excellent and affordable island lights from Access Lighting….

“Adele”  23733 ceiling pendants in Brushed Steel with blown glass available in a variety of colorful glass options.

“Iron”  20738 ceiling pendants, contemporary with a fresh new look in brushed steel with opal glass.

“Tungsten” , LED, energy-efficient, cool, beautifying light.

“Kalista” in classic black and white with crystal adds a sophisticated and tailored elegance.

“Phoebe” offers 3 halogen lamps that are adjustable and provide luxurious light over the kitchen island.

Designer kitchen island lighting should not only be beautifying; it should be  durable, energy-efficient and eco-friendly, too.  Check out the latest kitchen island light fixtures at 1800lighitng.com.  Enjoy the guaranteed best prices on all new designs, including pendants, mini-pendants and large island light fixtures from Access Lighting.

When you flick on the light switch, what happens? If you’re thinking “the room lights up… hopefully,” then you’re probably missing out on an opportunity for breathtaking lighting to do so much more than just let you see in the dark.

Your home should look intentional and deliberate, not just functional. Lighting is one of the best, easiest, and most easily ignored ways to make your home go from “nice place,” to “oh wow.” Seriously! Think back to the first time you saw under-cabinet lighting, for instance. Wow, talk about a way to get the most out of a space, while still showing off the best aspects out of the kitchen. That is exactly the effect that an inspired electrician can create, simply by optimizing your layout to handle some really nifty things with lighting. Even if you don’t decide to pull the trigger on the uplighting for your soon-to-come artwork, having the ability to add that in with little effort later thanks to a box hidden in the wall (just in case) takes almost no effort on our part, but can make a tremendous difference in your home’s perception, and value, down the road.

Light doesn’t just shine from one direction. Even sunlight is seen in the form of reflection, direct contact, and general ambient lighting. These simple principles are the same that should be used and recreated in your home. Your home should mirror that breathtaking view you saw on your favorite vacation, when the sunlight shone just so; conjure up that image, then imagine the architecture of your home and how it could be better illuminated. If you’re drawing a blank, don’t worry, that’s what our experienced electricians are here for. We’ll happily handle the up lighting, room lighting, and ambient lighting to create the effect that you’re looking for, even if you don’t really know how to explain it or where the circuits need to run. While all of this sounds expensive, creating a couple of extra lighting lines is simple when you’re already committing to work on your home, but becomes much more difficult later; always take advantage of the opportunity to bring an electrician and find out what is possible – 9 times out of 10, we find that homeowners who do this thank themselves for it later.

One of the biggest mistakes that builders and general contractors make is doing the bare minimum for lighting, leaving the home with nothing but a few can lights either dimly lighting the room or blinding everyone inside. Don’t let your lights let you down, or you’ll find that all your painting and furniture efforts just seem to fall flat of that wow factor you’re looking for.

Contact Electrical Gurus in Des Moines for the inspired, experienced service you need to create artistically inspired lighting for your home. When done right, you’ll find an incredible amount of value in a couple of lighting changes.

It’s never a good idea to use electricity around water; bathroom spaces always have a certain amount of humidity and steam as well as water in them. You may end up using electrical devices such as hair dryers and shavers when you are in this bathroom and the shower and bathtub areas always have some water. These can prove to be an electrocution hazard or a fire hazard and it’s important to be extra careful when you are using any electrical appliances in the bathroom.

We all need water to maintain health and hygiene. However, it’s also an excellent conductor of electricity. This means you can easily experience shock when you are standing in a water puddle and touch an electrical appliance. If your skin in wet, that gives the electricity an easier path and it can pass through your body in an unhindered manner.

That can be extremely dangerous as electrical shock can cause heart arrhythmia, burns and can damage your nervous system and lead to death too. If the grounding is improper or if the wiring is poorly installed, that can start a fire as well. And so, it is crucial to maintain electrical safety when you are in bathroom spaces.

Here are some useful tips to you can follow to avoid an emergency:

We handle all types of commercial as well as residential electrical installation, repair and upgrade jobs. For any more information about our services and quotes, contact the Allround Electricals team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263