Electrical ballast replacements are a common project in both residential homes and commercial buildings. An electrical ballast is a device used to regulate electrical currents so that they do not reach uncontrollable levels. A common application of electrical ballasts is those found in any type of light structure such as fluorescent or neon lighting systems. Depending on the size of the replacement project, a licensed electrician isn’t always necessary; however, if you don’t have the proper tools or experience, it is a good idea to consult with a licensed electrician before attempting the replacement. To simplify the procedure, here are the answers to three common questions about electrical ballast replacement.

Similar to replacing a light bulb, if you have any type of neon or fluorescent light, you will eventually need to replace the electrical ballast in the lighting structure. Replacing the electrical ballast is a more reasonable solution than replacing the entire neon or fluorescent light structure. You will know when it’s time to replace the electrical ballast because the light will begin flickering or will stop working entirely.

Yes, you can perform a ballast replacement yourself. While ballast replacement can be a simple procedure, if not done properly you can cause damage to your replacement bulb but also the fixture. Before performing the replacement yourself, make sure you are confident and understand all the steps involved or you could end up with expensive bills you were trying to avoid. If you require assistance or have any questions about electrical ballast replacement, contact our team of licensed electricians at Expert Electric. We would be happy to help.

Thankfully, an electrical ballast replacement does not require a fully stocked tool shed in order to be completed. For most electrical ballast replacements, a few simple tools will do the trick. Depending on the type and size of your replacement, your replacement may require a simple screwdriver, nut driver, drill, pliers and wire stripper. This is in addition to the new electrical ballast which you will be replacing.

For more information on electrical ballast replacement, please contact the licensed electricians at Expert Electric. You can reach us at 604-681-8338 or you can book an appointment online through our website. For 24/7 immediate response emergency service, please fill out a form on our website so that we can get in touch with you as soon as possible. We offer various types of electrician services including electric water heaters, surge protectors, ceiling fan installation and we service all throughout the Greater Vancouver area and Lower Mainland.

You will be spending a lot more time indoors over the next few months as we ride out yet another winter. You will want to do what you can to ensure your family is as safe as possible inside your home. There are a few things you can do today to provide an extra layer of safety. Your Beverly Hills electrician is here to help you. You can count on the team at The Electric Connection to provide you with a knowledgeable, experienced electrician to take care of the following safety features for your home.

• Replace your old, standard outlets in the kitchen and bathroom areas with GFCI outlets. These are designed to cut the electricity the second the circuit is interrupted. These outlets are especially handy in areas where water is present, like the kitchen and bathroom. If an appliance is accidentally dropped in water, the breaker will trip, cutting off the electricity and reducing the risk of electric shock.

• Have hard-wired smoke detectors installed. These smoke detectors rely on your home’s main power rather than a battery. Dead or missing batteries in smoke detectors are often to blame for late warnings in the event of a house fire. The detectors are all interconnected so when one goes off, the rest of the alarms are sounded. You will need the installation completed by a professional electrician. Beverly Hills homeowners will feel better knowing the wiring was handled by somebody trained to work with electrical wiring.

• Carbon monoxide detectors are also handy devices that every home should have. If you use natural gas for your heat or have a woodstove, a carbon monoxide detector can warn you to unsafe levels of carbon monoxide in the home.

Your home is somewhere you should feel safe. These rather easy and inexpensive safety features can eliminate some of the risks in your home. Give The Electric Connection a call today and schedule your safety enhancements.

Have you ever wondered what would actually change if you switched to LED? You are probably too accustomed to the CFLs or tungsten lights you use right now, never done a long-term cost analysis and do not really imagine what kind of changes switching to LEDs will bring.

Let`s do a general cost analysis and compare the results of LEDs, CFLs and tungsten bulbs. I will take an electricity cost of 10 cents/KW and an average of 4 hours of light on per day, which means about 15000 hours of operating hours in ten years.

Let`s take the common tungsten lights first. If you have 10 incandescent bulbs in your small office, you will spend about $7.50 to purchase them and have an annual operating cost of approximately $84. Take into consideration that incandescent bulbs will be around for only 1000 hours (500 hours if you are lucky). There is also the additional cost generated by the fact that the air-conditioners will work harder to compensate for the heat emitted by the bulbs. Let`s see what happens in 10 years. In ten years, you will need to replace the light bulbs each year so in total you will spend $75 on the purchase and $840 on the bill, so $915 in total plus maintenance costs.

If you have 10 CFL`s in your small office you will spend about $110 to purchase them and have an annual operating cost of approximately $23. CFL`s will last for almost 10000 hours but they contain mercury and that could be a problem if you have people working for you and a hazard for the environment. If it is very cold or the lights are placed outside in the cold, they will need a couple of minutes to turn on and in some cases, they might not even work. Let`s see what happens in 10 years. In ten years, you will need to replace the light bulbs once and in total, you will spend $220 on the purchase and $230 on the bill so $450 in total plus considerable maintenance costs.

Now let`s see what happens if you have LED instead of CFL or Tungsten bulbs. If you have 10 LEDs in your small office you will spend about $390 to purchase them and have an annual operating cost of approximately $80. LEDs last will last for at least 50000 hours in any environment, whether is cold or warm, whether they suffer physical shocks or vibrations. Let`s see what happens in 10 years. In ten years you will not need to replace the LEDs and in total  you will spend $390 on the purchase and $80 on the bill, so $470 in total, but you will have no maintenance cost.

As you can see, it seems that incandescent bulbs are no option as they are the most expensive ones on the long term.

The first impression is that CFLs might be a little bit better than LEDs as the overall cost is a little bit lower (not counting maintenance costs).  The thing is that CFL will need another two or three replacements in the next years, while the LEDs will work just fine. In addition the maintenance cost will rise with the CFLs. CFLs are also a bio-hazard, they do not work always, take up a lot of space and give an unnatural light, so there are quite numerous advantages to LEDs when we compare them to CFLs so the slight disadvantage of LEDs in the first years can be easily ignored. Moreover, in 12 or 15 years the LEDs will prove to be more economical than all the other options.

just 15 years ago. I wonder if any of the attendees at COMDEX thought to themselves “One day, I can cook my steak with the help of a tiny glowing tool that changes colors when my meat is cooked to perfection.” Probably not. Thankfully Sharper Image did, so now you can cook your steak and monitor it from your smart phone.