These days’ computers exist in our homes within one form or another. These machines are quite valuable and expensive, and damaging them is not a good feeling. As computers run on electricity, improper use and function can result in electrical related damage. Keep these following simple tips in mind when working with your computers.

We have previously talked about the proper use of extension cords in the past, but this is especially applicable for computers. Extension cords are not meant to be a permanent solution when it comes to placing your computer away from an electrical socket. An extension cord can hinder surge protection and make the computer vulnerable to shocks that can damage the computer hardware.

If you have a computer, laptop, or monitor, the power cord likely has three prongs. These are not suggestions. Too many times people will try to fit these cords into two-prong sockets. The button prong that only appears on some cords is actually the grounding cable. This protects us from electrical currents that can spread to the metal casing surrounding the computer. If the grounding prong is not connected properly, you are risking a chance of serious electric shock.

Electricity powers computer hardware, but too much of it can damage the components. With a GCFI outlet you add another layer of protection to your devices. If there is an electrical storm or problem with your home electrical system and a surge occurs, you can rest assured that it will not reach your devices.

If you have an office setup that includes a monitor, computer, and printer a surge protector is highly recommended. The surge protector will shut off when a surge is detected and protect the electrical devices. Make sure that you know the load that the electrical devices have and check that both your electrical circuit and surge protector are rated for that load. If not, you will find the surge protector or breaker tripping constantly.

If you are setting up an office with computer hardware and electrical equipment, or require GCFI outlets in your home, contact your local Expert Electric. We can help to review your setup and provide you with solutions to keep you and your hardware safe.

If there are two things you should never mix, its water and electricity. Water actually reduces the body’s electrical resistance. This is why you probably know to never get electrical devices wet; such as bring a radio into the shower with you. It is important to keep yourself safe in the room that has the most water in it. Here are some tips when it comes to running electricity through the bathroom.

Sometimes it can be difficult to light the bathroom properly. With minimal windows or frosted windows, the light just doesn’t come in the same. Lighting is even more important in this situation so you have proper sight to avoid any hazards. You may require ample lighting to keep everything in your bathroom visible at all times. Plus, proper lighting can make your bathroom more peaceful and relaxing.

When installing lights in a bathroom it is important to ensure that they are watertight and water proof. When you have a hot bath or a hot shower there can be a significant amount of steam. If this steam gets into the light fixture or electrical connection it can corrode the wires and increase the chance of electrical surges and fires. If you are installing new lights in your bathroom have an expert check the product and connections to ensure that you are safe.

Blow dryers, shavers, curlers – there are many electrical devices that are commonly used in the bathroom so there needs to be an electrical outlet. This can be a huge risk for electrocution if not properly placed. Electrical outlets should be on their own dedicated circuit. In the event that there is a surge or water contact, only that circuit will shut off. The outlet should also have a GFCI (grounded fault circuit interrupter). Without a grounder, electricity can escape from the device and if you are wet, this is the last thing you want. Lastly, the outlet should be near the sink for functionality, but not close enough that any wires can hang into the water.

Our bathrooms can be a place of peace and escape, but you must respect the danger of putting electricity near water. If you are looking to remodel your bathroom call in an Expert Electrician.