Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

How many light bulbs have you changed in your lifetime? It’s a simple action, and often one that we don’t put much thought into, but what if the simple act of changing a light bulb could make a profound impact on the environment, and the well-being of future generations?  As experienced Plano Electricians, we at ElectricMan Inc. have made it our mission to help bring knowledge of Alternative Lighting Solutions, electrical efficiency, and environmental responsibility to the forefront of everyone’s minds. The reality is that even small changes can yield huge benefits when it comes to energy savings. According to www.EnergyStar.gov:

“If every American home replaced just one light bulb with a light bulb that’s earned the ENERGY STAR, we would save enough energy to light 3 million homes for a year, save about $600 million in annual energy costs, and prevent 9 billion pounds of greenhouse gas emissions per year, equivalent to those from about 800,000 cars.”

Think about the changes that you can make by simply replacing the outdated incandescent bulbs in your home as they burn out with one of the Alternative Lighting Solutions below. Here are some details on a couple of the most popular Alternative Lighting Solutions available.

Compact Fluorescent Lamp: Modern CFL bulbs for use in homes consist of a curved fluorescent tube and electronic ballast in a single unit, designed as a direct replacement for standard blubs. They use 3-4 times less power than comparable incandescent bulbs. These are great options to replace your standard light bulbs, but they do have a few small drawbacks. According to an article by PopularMechanics.com, while CFL’s do have a much longer lifespan than standard bulbs, they often lose some of their brightness long before their expected lifespan is up, and this is increased in fixtures that don’t allow for efficient cooling of the ballast located in the base of the bulb. Another documented fact about CFL bulbs is that they do contain mercury, which means that they must be disposed of properly by taking them your local approved recycling center. You wouldn’t throw a battery out with the daily trash would you? So you shouldn’t throw these out either.

Light Emitting Diodes: LED’s are a form of “solid state” lighting that have become available recently to homeowners as an incandescent and CFL replacement. Using small light emitting diodes mounted directly to circuit boards, these are highly efficient, and have fewer parts prone to failure, allowing for an expected realistic lifespan of 20,000 to 30,000 hours, when operated at recommended temperatures. While initial costs for these bulbs are higher than incandescent and CFL options, long term energy savings are where this alternative lighting option truly shines, with the average LED bulb using approximately 12-17% of the energy that it takes to run an incandescent bulb of similar output, the end result is a bulb that costs drastically less to power over time.

As a point of comparison, here is a simple chart of the energy usage of LED and CFL bulbs compared to incandescent bulbs, and the output associated with them:

Lighting technology has changed a lot in the past decade, and it is pretty amazing to see what could be on the horizon for future lighting innovations. Take this for example. While most homes will never need this amount of output, it’s pretty impressive to see that something the size of a Christmas tree light, like this plasma bulb, can put out more light, more efficiently, than the giant bulbs that we use in street lamps!

The great thing about these changes is that they aren’t something that requires a huge change in your lifestyle, so they are some of the easiest ways possible to help the environment, and lower electric bills while you are at it!

With the arrival of spring and the inviting weather it brings, you may want to spend more time outside, especially after having been cooped up all winter long. While it’s not yet warm enough to jump in the pool, there are numerous other ways to enjoy a pleasant evening with friends and family in your back or front yard. Without the proper outdoor lighting, though, come nightfall all the fun will have to stop. Because of your limited sight, you run the risk of hurting yourself and others. Whether you’re barbecuing, roasting marshmallows, watching your kids jump on the trampoline, or gazing up at a meteor shower, make sure you have the right lighting to maximize your experience! Check out these __ reasons to install adequate outdoor lighting.

Before you install lighting, consider how you use your outdoor space. For example, if you have a patio, deck or pool area, consider installing zoned lighting, which highlights a designated area. You’ll also want to illuminate areas such as your driveway, garage, sidewalk and entry way. All of these areas are important to light to ensure safe navigation and prevent a trip to the emergency room. Without proper lighting, one could trip over a hidden step, fall off the deck or worse – overcook the meat!

The more light the better. By installing the right fixtures in the right locations, you’ll eliminate all the scary spaces, increasing safety and peace of mind, not to mention guests will be able to find your house with ease. Illuminating your outdoor spaces will allow you to get the most of your day, and since the weather is only going to get warmer from here on out, we have a feeling you’ll want to be outside as much as you can!

When you add flood lights to your back patio, deck or front lawn, you’ll be able take full advantage of these spaces. Instead of having to go inside when dusk comes, you’ll be able to relax with your friends and family outside for as long as you like.  You could even enjoy a nice dinner around the patio table.

A well-lit yard and landscape deters unwanted guests from coming onto your property.  There are numerous types of lights you can install to increase home security:

Many homeowners make the mistake of adding security lights to the front of the home while ignoring the back. The back of your home can be one of the most vulnerable places because of fencing, so make sure you install lighting in this area as well. When deciding where to install your outdoor lighting, determine the darkest areas of your home as well as any places where an intruder could enter.

Your home is one of your most prized possessions. When you’ve spent countless hours perfecting the exterior of your home as well as your lawn and garden, why allow it to go unseen when nighttime comes? You can highlight the best features of your home by installing uplights, garden lighting and low voltage exterior lighting around your trees and shrubs. Not only will the perfect lights add appeal to your home, it will add an undeniable sense of warmth too. Friends, neighbors and passersby won’t be able to stop themselves from glancing at your home each time they walk or drive by it.