At Kolb Electric, we think it’s always interesting to see what types of calls come in each season. So with that in mind, we’ve put together a short list of the most common issues we take care of every winter, spring, summer, and fall. We hope you don’t have any of these problems any time of year, but if you do, call Kolb Electric!

Space heaters tripping circuit breakers – space heaters consume a huge amount of electricity, and if they are plugged into an outlet on an already overloaded circuit (one used to power holiday lights, for instance), they’re likely to cause it to trip. Circuits trip to prevent damage to the wiring of your electrical system, so knowing which outlets are on which circuits can prevent this from happening.

Kolb Electric offers circuit breaker repair »

Wet electrical connections shorting your GFCI – water and electricity don’t mix, and GFCI (ground fault circuit interrupter) outlets are designed to trip if they get wet. If any electrical device in or outside your home gets wet it could cause part of your home to short out. Knowing where your GFCIs are located and which outlets they control, can remedy this problem. If not, an electrician is your best bet for pinpointing and correcting the problem.

Broken down AC – if your air conditioner suddenly stops working during the summer, the first thing you should do is check the breaker. If it’s tripped, shut off the thermostat and reset the breaker. If it trips again after you turn the thermostat back on, call an electrician.

Window AC tripping circuit breakers – like space heaters in the winter, portable window air conditioners use a lot of electricity. Labeling the breaker connected to high energy-consuming appliances will remind people not to plug things into the same circuit.

Trees falling on meter boxes and risers – DC area springs and falls come with pretty unpredictable weather, which in rare cases can end up in downed trees on your property. Even a light touch from a tree limb can rip the electric meter base and riser off of the outer wall of your house.

Replacing ground fault circuit interrupter (GFCI) outlets –people like to test their GFCIs as part of spring and fall cleaning. So if you find any that need to be replaced, call Kolb Electric!

If you have any electrical problems in Maryland, DC, or Virginia, at any time of year, there’s only one name you need to know: the DC electricians at Kolb Electric!

The search for commercial lighting systems can be confusing, misleading, and overwhelming at times. With all of the different terms, labels, and technologies being used how can anyone expect you to make any decisions with all of that going on?

Well, this post is going to at least relieve your confusion about DesignLights Consortium vs EnergyStar approved and qualified lighting products. There is a difference, and you need to be well aware of what it is when you are looking into a new lighting system for commercial Click here to read it, then come back to finish the rest (opens in a new window)!

The major difference between DLC and EnergyStar is that DLC is only for commercial lighting products while EnergyStar is more focused on residential purposes and applications, with a minor hint of commercial lighting in there as well. This makes DLC the more “go to” organization when it comes to commercial lighting qualifications as they are seen as the experts on commercial lighting products and technologies.

Anyways, when it comes to becoming EnergyStar qualified for a lighting product, a product needs to pass these (along with others) guidelines to be able to be EnergyStar qualified:

Conclusion

After this quick, simple, and brief overview of the differences between EnergyStar and DLC; we hope you’ve found some light on the topic (get it, light).

In a general sense, most of your commercial lighting purchases will include DLC qualified products, especially when buying for warehouses, factories, parking lots, street lights, and the like all except for those listed.

Are you confused on any point? Have any comments or questions? Comment them below and we will surely find an answer or response!

Do you ever lie awake at night thinking about new ways to cut back on your energy consumption? You'll soon be able to rest soundly, because there's a new piece of technology that can make all your dreams come true. One of the trendiest ways to save energy with your home electrical work is by disaggregation, or breaking down consumption appliance by appliance so you can easily identify where you need to cut back. Now there's a way to hack into your circuit box and make disaggregation easy. Read on to learn more.

Reading the Data from the Circuit Box

There are a few different ways to acquire the data you need on the energy consumption of your various appliances and electronics in order to make informed decisions about conservation. One is to purchase all new smart devices, linked up to the Internet of Things, that let you monitor their performance individually. If you don't want to replace all your appliances and equipment just yet, you can purchase smart plugs that monitor the electricity usage of whatever you connect them to. There are also utility companies that are piloting disaggregation programs in homes that are hooked up to smart meters.

There's at least one device available, however, that allows you to look at all your appliances at once, without having to buy new equipment or rely on your utility company. The Neurio is a gadget that connects to your main circuit panel and monitors all the electricity that goes out through the various circuits in your home. Next, it sends the data to the Neurio server, where it is broken down even further to identify which devices are using how much energy. Then the data comes back to you, where you can read it using your smart phone or computer.

Informed Decisions About Your Electrical Work

From there, you can use that data and make decisions about when to cut back on using certain devices or appliances, or to run them at different times of the day. The Neurio will let you know just how much you're spending on powering things like dryers, and also tell you how much power you're wasting due to phantom loads or always-on technology. If you keep an eye on the data, you'll get an early warning when an appliance is lagging in efficiency, and know where you can make the most impact when it comes time to replace some of your older equipment with modern, energy-efficient devices.

Installing the Neurio is a somewhat complicated affair, involving connecting it to your main panel, so your best bet is to get an experienced electrician to handle the task. If you need help disaggregating your energy consumption, or any other modifications to your electrical work, contact a qualified residential electrician today.