Hamilton surge protection is something every home should have especially if the homeowner wants to preserve the quality of their appliances.

Unfortunately, many electronics such as computers, televisions and anything consistently pluggged in can be very sensitive to power surges, causing it to malfunction should electricity surge due to uncontrollable reasons. When this happens, Hamilton homeowners would need to start calling electricians in order to replace the microprocessors or even replace the whole unit entirely. With a surge protector, this type of problem can be avoided.The fact is that the electricity passing through a home is not always constant. It can go up and down due to power outages, downed lines or a strong power usage from the industrial sector. Although Hamilton homeowners might not always detect these inconsistencies in their electricity, there are definitely disadvantages to this type of electrical problem. This is why most homes today are advised to install surge protectors in order to prevent damages that most homeowners do not anticipate. Following are some advantages of installing this device in the house. Having Hamilton surge protection installed in a home is definitely something that would increase its sale value. Prospective buyers would view this as one less thing to worry about and would have no problem shelling the extra cash needed.

Save Money Regardless of whether a person hires for microprocessor replacement or buy a new appliance, there’s no question that this is an unnecessary expense. Thousands of dollars could be wasted on something that could have been easily prevented by a simple installation. Not to mention the amount of time and effort a person needs to spend on discarding and purchasing new items. Suffice to say, it would be a smart financial move for homeowners to install the surge protector instead of waiting for something like this to happen.

Keep in mind that there are several types of Hamilton surge protectors being sold today. There are those that are specially made for the whole home while others are just for specific items. It is recommended that Hamilton homeowners opt for a full-house protector so that they can be assured of 100% peace of mind should some things happen beyond their control. Note that since surge protection deals with electricity, it is always best to call a Hamilton professional for help.

If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.

If you’re a homeowner, you’re probably looking for ways to save energy and money. There are so many hidden costs involved in home ownership, and if you’re not careful, your electrical consumption can be a big factor in those costs. However, it’s easier than you might think to save on energy if you just follow a few simple tips.

Light switches are so common we rarely think twice about them. We walk into a room, flip the switch without looking and carry on. In the middle of the night or first thing in the morning, the light that comes on in an instant is a bit of a shock to eyes that have not quite adjusted. Lights are often a little too much for certain occasions and you are forced to choose between too much or too little. Or are you? Your California electrician has a better idea. The team at The Electric Connection can help you take control of the light in your life by installing a dimmer switch.

For a long time, dimmer switches were a common feature for chandeliers installed in the dining room area. This allows you to dictate just how much light you want to shed over the dinner table. Cheery breakfasts and lunches are best served with plenty of light. Evening meals that are meant to help you unwind or connect with your friends and loved ones over a delicious entree are best served with low light. It gives the space a more intimate feel.

You can have that same luxury of light control in every room in the house. There is some very minimal electrical wiring that will need to be done. It is a fairly easy switch to install a dimmer in place of your existing light switch. You can have one in the living room that allows you to turn down the lights while you are watching television. Another in the bathroom gives you the ability to have low light for those middle of the night visits instead of blinding light that wakes you up and interrupts a good night’s sleep. An electrician in southern California is ready to help. Just give The Electric Connection a call today and schedule your dimmer switch installation.