2. In order to open the headlight housing, it must be heated to soften the glue that seals it. Preheat the oven to 270 degrees Fahrenheit, and place the housing in the oven (top rack). Heat the housing for approximately seven minutes. Note that this time will vary by vehicle manufacturer and that you should be careful not to overheat your assembly. Also note that the headlight will be hot when removing it from the oven, so take care not to burn yourself.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

4. LED angel eye installation will vary by headlight. In this instance, we mounted an

5. Place the second layer back in the housing to ensure that everything is aligned the way you would like. This is also a great time to clean the inside housing, as you will not be able to do so once you reseal it. The cleaner you get it the better; smudges and dirt will be more visible when the lights are on.

8. Now it’s time to reseal the headlight housing. Preheat the oven to 270 degrees again, place the layers together, and put the headlight in the oven (with halo rings installed) for seven minutes. Remove the headlight from the oven, and press the layers together firmly as you work around the lens to ensure all of the edges are sealed (this might require gloves, as the headlight will be somewhat hot). Be careful to only press on the edges so as not to warp the lens.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

10. With the headlight housing installed, complete your wiring, and test connections to ensure proper installation. Be sure to tape/heat-shrink any wiring connections that were added, and clean up any loose wiring.

Electric wires and cables are the lifeline of most if not all industrial applications. If your cables fail, your entire system comes to a halt leaving you with costly downtime and loss of profit.

As a busy manager or department head in any industrial plant, you always have a lot to worry about every day. Implementing and following some basic guidelines will extend the lifespan of your cables, reduce downtime, decrease safety and non-conformance issues and increase the overall efficiency of the plant.

Here are some common practices for proper wire and cable care:

1. Choose an Effective Approach

Study the various electrical wires and cables in their respective departments.

Summer storms and problems with the electrical grid can lead to power outages wherever you may live. There was a time when candles and flashlights were really the only way in which to make it through a power outage in one’s home. Thankfully, those days are far behind us at this point. If you are interested in keeping your home powered, despite the fact that you’re receiving no power from the grid, we strongly recommend that you consider the installation of a whole-house generator. More specifically, we suggest that you give the use of an automatic standby generator in  Needham Heights, MA some serious consideration. 

Some homeowners may only be interested in keeping an appliance or two running in the event of a power outage. In such instances, a portable generator may suffice, though these systems are really better suited for the campground or use at tailgating events. For whole-house protection, though, a whole-house generator is obviously the way to go.

What happens when you’re not at home to activate your generator, though? Do you just leave a chest freezer or your refrigerator without any electricity to keep them up and running, even if you’re going to be gone a few days? With the use of an automatic standby generator, you won’t have to worry about integral systems shutting down in the event of a power outage, even if you are not there to start up the generator manually.

A whole-house generator is wired into your electrical system directly, and automatic standby models are designed to detect the loss of electricity to the system. Once it has, the generator springs into action, powering your systems so that you won’t have to worry about spoiled food, failed security systems, and so on.