Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

Has it ever happened that you noticed an inexplicable rise in your electricity bill in spite of using the same appliances for the same amount of time that you generally do? No, the neighbor’s bill didn’t get delivered to you accidentally and neither is it the fault of your electrical services provider. There might be a number of other reasons behind a rise in your bill amount, which generally aren’t taken into account by a majority of people. Let’s take a look at them –

1. Faulty Appliances If your domestic appliances like washing machines, air conditioners, dishwashers, etc., are faulty, they will consume more energy than normal. Also, faulty wiring can damage the appliances in the long term, lead to electric fires or even get electrically charged, which may give you life-threatening shocks if you come in their direct contact.

Everything seems fine, then POOF–your power goes out. Chances are, you tripped a circuit breaker. Electrical problems are one of those things that tend to make a homeowner’s stress level skyrocket. You’re not sure what’s wrong, but suddenly you’ve lost access to the power you depend on in your DC area home! 

A breaker can trip for many reasons. Below are the tops 5 causes of an electrical breaker tripping in your home.

Looking for electrical repair in Washington, DC? Contact Kolb today!

A breaker trip comes as a result of a circuit tied to your circuit breaker exceeding its safe parameters. They can be identified by a sudden loss of power to specific appliances (those that used a dedicated circuit, like a fridge or microwave), or a loss of power in your home that is limited to a specific area.

There are a lot of issues that can result in breaker trips, but there are the ones our DC electricians address most often during electrical repairs in Washington, DC:

Looking for superior service and quality from your electrician? Contact Kolb Electric for electrical repair in Washington, DC!

One of the biggest and best advancements to hit modern U.S. homes today is the advent of the home automation system. These systems allow you to have control over your house at your fingertips. There’s a combination of hardware, software, and appliance-based interfaces that goes into creating this system, and therefore it’s only natural that something can eventually go wrong.

Even the greatest technology can have bugs that will need to be worked out. If you have problems with your home automation system, the best thing you can do is give your professional electricians a call to help repair the damage and get you back in control. However it may also be helpful to understand what some of the most common issues are, and how we troubleshoot them.

Naturally, when you go to integrate home automation into your home, you are going to have some home systems—if not all—that are older and have been with the home for a awhile. Integrating these older electronic systems with the new one of your home automation system can be challenging, and it may take some time to understand where the integration problems exist.

This type of problem usually presents as a non-response from whatever device or appliance you are attempting to use, or limited functionality from that system. Your professional electrician will know how to repair these issues as they have experience with these types of issues.

Your home automation system is completely interconnected and connected to your home’s electrical system, and therefore depends heavily on the wiring of your electrical system. So if you experience any type of electrical short, poor wiring, or faulty wiring, then there can be a malfunction of your system. Your professional electrician will look at the electrical layout for your home automation system—which can be complex—to determine the exact cause of the problem.

Sometimes due to unforeseen circumstances your home automation system may suffer from physical damage. When that occurs, a professional will be able to carefully inspect the system and repair or replace the components that were damaged to obtain full functionality of your home automation system.