All households are trying to remain warm during the colder months. As such, the likelihood of experiencing a house fire increases during the winter. Fortunately, you can reduce your chances of having a house fire by following the following safety strategies.

Many home fires start when sparks from a fireplace ignite flammables that are too close to the hearth. If you have a fireplace, you can reduce your chances of experiencing a house fire by removing any flammables close to your fireplace. 

Additionally, you must prevent embers from flying out of your fireplace. Installing glass door fronts on your fireplace will prevent sparks from coming into contact with flammable materials.

RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck. With RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. They’re great for parties or late-night swims and can be easily installed. We’ve included installation instructions for our waterproof LED strip lights. Some cities require above-ground pool lighting to meet National Electrical Code (NEC) Article 680 standards, which would limit possible pool lighting installation locations. Before you purchase LED pool lights, check your city’s code requirements. We also recommend that you have a certified electrician install your lights.

1) Before ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to find its circumference; this number indicates the total length of strip that you will need. The 21-foot pool used for these installation instructions has a circumference of 65.94 feet and requires 4 runs of 16-foot LED strips.

You will also need to measure the distance between where your power supply will be and both sides of your pool where the amplifiers will be installed (see the setup and wiring illustration below). These distances will tell you how much 18-gauge wire you’ll need for connecting the amplifiers to power. Make sure to account for the distance of any dips or turns that the wires may take along their paths.

Lastly, measure the approximate distance that will be between your controller and where your strip lights begin. This distance will tell you how much 22-gauge wire you’ll need for connecting the controller to your strips. You will also need two small sections of this wire for connecting your first and second strip lights to the amplifiers.

2) Before you’re ready to install your LED strip lights, be sure to drain your pool. Begin by creating or locating a dry area away from your pool for the power supply. The power supply should be contained in a weatherproof box. Power supplies should be installed between a ground fault circuit interrupter (GFCI) protected circuit and the pool’s junction box. It’s crucial to use a GFCI protected circuit as it shuts off if current flows where it’s not supposed to.

Wire the included plug to the power supply, but do not connect to power until the installation is complete.

3) Connect your RGB LED controller to the power supply. Cut the barrel off of the controller wiring. Strip back the remaining wires, and connect its wires to the power supply.

4) Cut the LC2 connector off of the remaining end of the controller, and strip back the wires. Run 22-gauge four-conductor wire to connect the controller to your low-voltage pool lights; use dolphin connectors to join like-colored wires. Connect your first two LED strip lights to the controller by joining each set of like-colored wire with a dolphin connector. You should be connecting four wires of each color (red, blue, green, and black) together. For added protection, cover all wire connections in this installation with electrical tape.

5) You will apply strip 1 clockwise around your pool rim and strip 2 counterclockwise. If you have a flat surface, use mounting clips to secure the strips in place as you go. If you want to mount the strips under your pool rim, drill small holes in the trusses approximately every 2 feet. Use cable ties to anchor the strip to the truss. You can also use speed nuts or cotter pins for strip anchoring to avoid drilling holes.

Solder a small section of 22-gauge four-conductor wire onto the strip’s end terminals. To reseal the LED pool light strip, slide wires through the holes of a 10-mm end cap, fill the cap with silicone, and slide it into place on the end of the strip. Be sure to cover all of the exposed conductive traces to ensure water resistance. Allow a minimum of two to three hours for the sealant to cure.

7) Once the new end wires are attached to the strip, you will mount the amplifier. Use the double-sided 3M foam pad to mount the amplifier in the middle of strip 1 and strip 3. For best results and added security, apply 3M adhesion promoter to the amplifier and its installation location on the pool wall.

8) Using a dolphin connector, join each like-colored wire on strip 1 to the same color on one end of the amplifier. Do the same when connecting strip 3 to the other side of the amplifier. You should be connecting three wires in each color (red, blue, and green) together on each side of the amplifier. The black strip wire will be joined with white amplifier wire. Note that the separate group of just black and red wires are meant to be connected to the power supply. Follow the same instructions for connecting strips 2 and 4 to the amplifier on the other side of the pool.

9) Use 18-gauge wire and dolphin connectors to connect the amplifiers to your power supply.

10) Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.

For more LED pool lighting options, see our entire selection of waterproof color-changing LED strip lights.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

If you’re like me, you have a favorable reaction to yachts, perhaps without ever having stepped foot on one. I have absolutely no idea how I will one day acquire a yacht. All I know is that yachts and I are destined to be together some way, somehow. This amorous examination of yacht lighting exists, yes, because there are interesting things to note about yacht lighting design, but, if I’m totally honest, we’re in the dog days of summer; I’m landlocked; and I want to stare at yachts. Do you want to stare at yachts, too? Let’s stare at yachts in all their luminous glory.

1. In A Word, Yes. 

I am sucker for underwater lights. In pools, in little water features and ponds, they just make me smile. But beaming into a foreign sea from the hull of a yacht? I am slain (in a good way). Of course, that’s not the only amazing thing about the yacht lighting situation above. While the lights are illuminating the sea on either side of our vessel, whaddaya say we project the sea life around us onto this huge sail? OK, great!

I mean, seriously?! Are you seriously watching the sea life around your yacht as it’s projected onto a giant screen in the middle of the beautiful sea with starlight and moonlight above you and light beams shooting out of either side of your vessel? Yes? Well OK, then. I guess I would, too, if I were you.

2. Outdoor Recessed Lights

What an amazing night time mood these recessed lights lend this yacht. I love the way the fixtures form scallops of light along the side of the cabin, especially because the reflective surface of the yacht amplifies the light levels. Very nice via Charter World

And it also says, Come hither thou and hangeth out on me. Basically, these lighting designers have gotten it right. What looks better against the soft night sky than lights with a via Charter World

Those recessed light fixtures with single and multiple lamps are a great choice for this yacht living room/control center/spaceship dashboard. The top level is evenly lit, and the lower level, with its crisp light, invites the eye and the whole body, actually. Take me to Greenland, Captain! If you need me, I will be luxuriating.

7. Cove Lighting!

Many homeowners carry out electrical upgrades in their home and they get the fixtures and fittings replaced. At times, switchboards etc. may be replaced or circuit breakers too. However there is one component of electrical installations that is typically out of sight, out of mind – wiring!

We at Allround Electrical always recommend to our clients that if their home and the wiring in it, is over two decades old, they should consider getting wiring upgrades done on their property. In fact, when you choose to upgrade the wiring in your home, it gives you the assurance that the system will be able to bear the load of all the electrical appliances that you add to the different circuits on your property.

It’s a good idea to plan wiring upgrades at the same time that you plan remodeling projects; this is when you might open up walls and ceilings anyways; and this reduces the hassle, expense and time spent on getting this work done. This is because most of the electrical wiring is fitted within your walls; and it often involves opening up various wall sections, that will later have to be patched & repainted.

This is why it’s important that you plan for current and future requirements; this will ensure that you don’t have to worry about the wiring upgrades for at least a few more years. So, what is it that makes wiring such an important aspect of the electrical installation on your premises? Wiring supports a range of critical functions including:

When you are getting any of these jobs done, it’s crucial that you hire the services of an expert and experienced electrical company for the job. They will ensure that high grade, appropriate materials are used in the work and that the workmanship is of the highest grade too. While you are getting this job done, there are certain things you should be doing, such as:

These are just some of the basic aspects that have to be attended to when electrical upgrades are being done in your home. When you hire the services of a vetted and credible electrical contractor, you have peace of mind that the job will be handled in the best possible way.

For more information, simply speak with the experts at Allround Electrical and take our advice on various aspects of electrical and wiring installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263