There is nothing like a do it yourself project.  The satisfaction and reward of a job well done.  However, some projects are better left to the professionals.  Electricity is a powerful source of energy, if not handled properly can be dangerous and even deadly.  All to often we see projects started with good intentions, that end up costing the untrained person more than if they would of had a professional handle the project from the beginning.  Have your home electrical projects handled by licensed professional electricians.

The most dangerous time of the year for electrical fires in Des Moines is undoubtedly during the holiday season. Christmas decorations, in particular, lead to a dizzying amount of house fires each year. On average, over 200 homes burn down each year directly because of Christmas Trees and other decorations, and this figure doesn’t include the small, contained fires and those caused by candles. Needless to say, safety should be a major priority when planning out and putting up your holiday decorations.

Many electrical problems are caused by outdated technology and old incandescent Christmas lights; when you start digging out your decorations, ask yourself if it is time for an upgrade. While more expensive, modern LED Christmas lights use far less power, generate less heat, almost never require bulb replacements, and last far longer than their incandescent ancestors and inexpensive alternatives. In terms of cost alone, the new lights will likely pay for themselves in energy savings after only one, maybe two, holiday season(s).

For instance, running 1,000 incandescent Christmas lights for a month in Iowa will likely cost about $122, whereas the same amount in LED bulbs (which shine brighter, by the way) will cost less than $1.50. That extra $120 can go a long way towards buying a few better presents or do some real good in the community. By upgrading your lights this holiday season, you’re ensuring that you don’t have to hike up your energy bill to decorate the house each year while keeping the family much safer than they would be with your old lights.

For any strand you choose to not upgrade this year, be sure to thoroughly check each strand for frayed wires or cracked bulbs. Incandescent bulbs can easily create a completed electrical circuit with a Christmas Tree, gutter, or just about anything else it may be hung upon, creating a very real fire hazard.

If you decide to get out the extra-tall ladder that you seem to only use to decorate and un-decorate the house each year, take special care to avoid power lines. One of the easiest ways to get injured when using a tall ladder isn’t actually from falling, but from electrocution while moving the ladder. Take the time to locate all power lines before beginning work and always get down and collapse the ladder before moving anywhere around power lines.

No carpeting, drapes, curtains, or other fabrics should ever come into contact with your lights. Furthermore, be sure to never wrap cloth-like decorations around your lights. The mesh commonly found at holiday stores is made for wreathing and often contains metallic elements for a shimmering effect, making it especially potent at conducting electricity and starting fires in the event of a short.

We hope you’re safe this holiday season, but if you happen to overload your circuit breakers or have a concern about the lighting of your holiday decorations, be sure to give us a call right away. The electricians at Electrical Gurus want to help to keep every Des Moines family happy and healthy throughout the holiday season.

Although most electrical fires start very small, they can quickly spread into almost unmanageable proportions. This is especially true if the fire starts behind your walls. This can lead to a fire becoming very large before you even realize that it is there. Your best protection against an electrical fire is to prevent it from happening in the first place. If you must deal with one, however, you should always be prepared to take the proper course of action. Whenever faced with an electrical fire, your own personal safety is the number one priority. If the fire is too large for you to contain, or is growing too quickly, evacuate everyone out of the home immediately until a fire crew can make the area safe again.

If you are in a position to control the fire, start by shutting off all power to your building. Simply go to the electrical panel and shut off the main breaker until the fire is under control. If you do not already know where this is, find its location and make sure that it is never blocked or obstructed. Once the power has been shut off, you can attempt to smother the fire with a Class C fire extinguisher or baking soda. Do not ever throw water on an electrical fire. Water conducts electricity, which can result in you or someone else becoming electrocuted. Whenever the fire has been controlled, do not turn your electricity on until an electrician in Pasadena has inspected your wiring for safety. The last thing that you want is for a second fire to occur in the same place.

When it comes to using electricity in your home and businesses, your safety is more important than any other factor. Learn how to use your electrical system safely so that you can avoid any electrical fires, shocks or other mishaps. For more tips and information on fire safety and services, visit The Electric Connection website at www.theelectricconnection.com/.

It used to be that the moon and the stars were the brightest bulbs in the sky. But as anyone who’s flown across a city at night knows, these days, there are an awful lot of outdoor lights shining up from the ground.

Many people assume that an orange nighttime sky is just ugly, not harmful. But recently scientific studies have suggested that light pollution is more than an annoyance; it’s destroying wildlife, damaging human health and costing us a lot of extra money.

That’s why a growing number of cities and towns across the United States are drafting ordinances to try to bring the night sky back. They’re requiring that all new outdoor lighting fixtures that are installed – both commercial and residential – only shine light down onto the place that needs to be lit, not up into the atmosphere.

Known as the Dark Sky movement, these ordinances vary from town to town, but often the requirements are similar. No outdoor lighting fixtures can shine any light above a horizontal line. Instead, everything must shine down.

“We’re not saying you can’t have that aesthetic value, you just light it from the top down,” explains Johanna Duffek, Sections Coordinator with the International Dark Sky Association, a Tucson, AZ-based non-profit group that’s at the forefront of the movement.

Although the original purpose of The International Dark Sky Association was to keep the night sky pristine for astronomers, today the Dark Sky movement is gaining ground because more consumers are interested in reducing their energy usage, and when you’re not wasting light that’s going up into the sky, you can use a lower wattage bulb to achieve the same level of exterior lighting.

For example, if a homeowner used an outdoor sconce that had openings on the top and the bottom, he’d have to use a 100-watt bulb. But if he switches to a Dark Sky fixture that only allows light to shine from the bottom of the fixture, the homeowner could use a 40-watt bulb.

“It’s a more efficient use of light,” explains Tom Patterson, Director of Product Development at Hinkley Lighting, which already offers some Dark Sky light fixtures. “You can use a third of the wattage or half of the wattage and get the same amount of lumens.”

Patterson says consumer awareness of the Dark Sky movement is still very low, but he said awareness has been growing among local government leaders, and that is forcing the manufacturers to come out with more and more Dark Sky-friendly outdoor fixtures.

“Now in Arizona, in all the new construction, you’re going to have to meet the dark sky qualifications,” Patterson says. “It’s catching a little bit more momentum.” Hinkley, for example, advertises that it can make about 25 percent of its outdoor lighting fixtures Dark Sky compliant. Retailers are charged about $15 to $20 to change a regular fixture to a Dark Sky fixture.

Currently, there is no official government standard for a Dark Sky fixture, but the International Dark Sky Association has been in talks with the Department of Energy to incorporate the Dark Sky philosophy into the Energy Star program.

The International Dark Sky Association also independently evaluates fixtures from manufacturers and awards a seal of approval to all of those that meet its requirements.

So far, Duffek says the International Dark Sky Association has awarded Fixture Seals of Approval to 75 different lighting manufacturers, and while many of those have been commercial applications, Duffek says the organization is hoping to increase participation among residential lighting manufacturers.

Hubbardton Forge, for example, makes a sconce that has received the Dark Sky Fixture Seal of Approval that features a slate-colored ceramic shield around the light bulb that forces the light down. And the Minka Group has several outdoor lights with metal crowns that block the upward light.

Both Patterson and Duffek say the biggest resistance to Dark Sky fixtures isn’t coming from manufacturers but from homeowners who are afraid that less exterior lighting around their house will make them less safe.

But Duffek said homeowners need to understand that blocking light from going into the sky doesn’t mean blocking all exterior lighting. Duffek says the Dark Sky movement suggests homeowners buy outdoor lights with movement sensors that will go on if someone enters your yard, which can help alert you to danger and keep your energy usage down at the same time.

“When you keep the lighting on all the time, all you’re doing is lighting for the bad guys,” Duffek says.

Duffek says the biggest challenge now is to educate the public about the benefits of reducing light pollution and encouraging manufacturers to continue to design compliant fixtures.

“We always try to present it as a win, win, win solution,” she says.